[PATCH v2 0/8] ARM: at91: dts: sama5d3: add dt support for atmel isi and ov2640 sensor

[PATCH v2 0/8] ARM: at91: dts: sama5d3: add dt support for atmel isi and ov2640 sensor

[Josh Wu]

This patch series add ISI and ov2640 support on dts files.

As the ov2640 driver dt is still in review. The patch is in: https://patchwork.linuxtv.org/patch/27554/
So I want to send this dt patch early for a review.

v1 -> v2:
  1. add one more patch to change the pin name of ISI_MCK
  2. rewrite the commit [4/8] ARM: at91: dts: sama5d3: change name of pinctrl_isi_{power,reset}.
  3. move the common chip parts of ISI node to sama5d3.dtsi.

Bo Shen (3):
  ARM: at91: dts: sama5d3: split isi pinctrl
  ARM: at91: dts: sama5d3: add missing pins of isi
  ARM: at91: dts: sama5d3: move the isi mck pin to mb

Josh Wu (5):
  ARM: at91: dts: sama5d3: add isi clock
  ARM: at91: dts: sama5d3: change name of pinctrl_isi_{power,reset}
  ARM: at91: dts: sama5d3: change name of pinctrl of ISI_MCK
  ARM: at91: dts: sama5d3: add ov2640 camera sensor support
  ARM: at91: sama5: enable atmel-isi and ov2640 in defconfig

 arch/arm/boot/dts/sama5d3.dtsi    | 24 ++++++++++++++++++-----
 arch/arm/boot/dts/sama5d3xmb.dtsi | 40 +++++++++++++++++++++++++++++++++++----
 arch/arm/configs/sama5_defconfig  |  6 ++++++
 3 files changed, 61 insertions(+), 9 deletions(-)

-- 
1.9.1

[PATCH v2 1/8] ARM: at91: dts: sama5d3: add isi clock

[Josh Wu]

Add ISI peripheral clock in sama5d3.dtsi.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/boot/dts/sama5d3.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 5f4144d..61746ef 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -214,6 +214,8 @@
 				compatible = "atmel,at91sam9g45-isi";
 				reg = <0xf0034000 0x4000>;
 				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&isi_clk>;
+				clock-names = "isi_clk";
 				status = "disabled";
 			};
 
-- 
1.9.1

[PATCH v2 2/8] ARM: at91: dts: sama5d3: split isi pinctrl

[Josh Wu]

From: Bo Shen <voice.shen@atmel.com>

As the ISI has 12 data lines, however we only use 8 data lines with
sensor module. So, split the data line into two groups which make
it can be choosed depends on the hardware design.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Josh Wu <josh.wu@atmel.com>
---
 arch/arm/boot/dts/sama5d3.dtsi    | 11 ++++++++---
 arch/arm/boot/dts/sama5d3xmb.dtsi |  2 +-
 2 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 61746ef..595609f 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -547,7 +547,7 @@
 				};
 
 				isi {
-					pinctrl_isi: isi-0 {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
 						atmel,pins =
 							<AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA16 periph C ISI_D0, conflicts with LCDDAT16 */
 							 AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA17 periph C ISI_D1, conflicts with LCDDAT17 */
@@ -559,10 +559,15 @@
 							 AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */
 							 AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC30 periph C ISI_PCK, conflicts with UTXD0 */
 							 AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */
-							 AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
-							 AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
+							 AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
+					};
+
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
 							 AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
 					};
+
 					pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 {
 						atmel,pins =
 							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD31 periph B ISI_MCK */
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 49c10d3..2530541 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -61,7 +61,7 @@
 
 			isi: isi@f0034000 {
 				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_isi &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>;
+				pinctrl-0 = <&pinctrl_isi_data_0_7 &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>;
 			};
 
 			mmc1: mmc@f8000000 {
-- 
1.9.1

[PATCH v2 3/8] ARM: at91: dts: sama5d3: add missing pins of isi

[Josh Wu]

From: Bo Shen <voice.shen-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>

The ISI has 12 data lines, add the missing two data lines.

Signed-off-by: Bo Shen <voice.shen-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
Acked-by: Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
Acked-by: Alexandre Belloni <alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
 arch/arm/boot/dts/sama5d3.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 595609f..b3ac156 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -568,6 +568,12 @@
 							 AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
 					};
 
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC27 periph C ISI_PD10, conflicts with SPI1_NPCS2, TWCK1 */
+							 AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC26 periph C ISI_PD11, conflicts with SPI1_NPCS1, TWD1 */
+					};
+
 					pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 {
 						atmel,pins =
 							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD31 periph B ISI_MCK */
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 4/8] ARM: at91: dts: sama5d3: move the isi mck pin to mb

[Josh Wu]

From: Bo Shen <voice.shen@atmel.com>

The mck is decided by the board design, move it to mb related
dtsi file.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Josh Wu <josh.wu@atmel.com>
---
 arch/arm/boot/dts/sama5d3.dtsi    | 5 -----
 arch/arm/boot/dts/sama5d3xmb.dtsi | 5 +++++
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index b3ac156..ed734e9 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -573,11 +573,6 @@
 							<AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC27 periph C ISI_PD10, conflicts with SPI1_NPCS2, TWCK1 */
 							 AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC26 periph C ISI_PD11, conflicts with SPI1_NPCS1, TWD1 */
 					};
-
-					pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 {
-						atmel,pins =
-							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD31 periph B ISI_MCK */
-					};
 				};
 
 				mmc0 {
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 2530541..6af1cba 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -117,6 +117,11 @@
 							<AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD30 periph B */
 					};
 
+					pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 {
+						atmel,pins =
+							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD31 periph B ISI_MCK */
+					};
+
 					pinctrl_isi_reset: isi_reset-0 {
 						atmel,pins =
 							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;   /* PE24 gpio */
-- 
1.9.1

[PATCH v2 5/8] ARM: at91: dts: sama5d3: change name of pinctrl_isi_{power,reset}

[Josh Wu]

For sama5d3xmb board, the pins: pinctrl_isi_{power,reset} is used to
power-down or reset camera sensor.
So we should let camera sensor instead of ISI to configure the pins.

This patch will change pinctrl name from pinctrl_isi_{power,reset} to
pinctrl_sensor_{power,reset}. And remove these two pinctrl from ISI's
DT node. We will add these two pinctrl to sensor's DT node.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
---
v1 -> v2:
  1. only do things that mentioned in commit message.

 arch/arm/boot/dts/sama5d3xmb.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 6af1cba..db47f8b 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -61,7 +61,7 @@
 
 			isi: isi@f0034000 {
 				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_isi_data_0_7 &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>;
+				pinctrl-0 = <&pinctrl_isi_data_0_7 &pinctrl_isi_pck_as_mck>;
 			};
 
 			mmc1: mmc@f8000000 {
@@ -122,12 +122,12 @@
 							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD31 periph B ISI_MCK */
 					};
 
-					pinctrl_isi_reset: isi_reset-0 {
+					pinctrl_sensor_reset: sensor_reset-0 {
 						atmel,pins =
 							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;   /* PE24 gpio */
 					};
 
-					pinctrl_isi_power: isi_power-0 {
+					pinctrl_sensor_power: sensor_power-0 {
 						atmel,pins =
 							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */
 					};
-- 
1.9.1

[PATCH v2 6/8] ARM: at91: dts: sama5d3: change name of pinctrl of ISI_MCK

[Josh Wu]

For sama5d3xmb board, the pins: pinctrl_isi_pck_as_mck is pck1, and
used to provide MCK for camera sensor.

We change its name to: pinctrl_pck1_as_isi_mck.

As we want camera sensor instead of ISI to configure the pck1 (ISI_MCK) pin.
So we remove this pinctrl from ISI DT node. It will be added in sensor's
DT node.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
---
new added in v2.

 arch/arm/boot/dts/sama5d3xmb.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index db47f8b..d9464fc 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -61,7 +61,7 @@
 
 			isi: isi@f0034000 {
 				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_isi_data_0_7 &pinctrl_isi_pck_as_mck>;
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
 			};
 
 			mmc1: mmc@f8000000 {
@@ -117,7 +117,7 @@
 							<AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD30 periph B */
 					};
 
-					pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 {
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
 						atmel,pins =
 							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD31 periph B ISI_MCK */
 					};
-- 
1.9.1

Re: [PATCH v2 0/8] ARM: at91: dts: sama5d3: add dt support for atmel isi and ov2640 sensor

[Nicolas Ferre]

Le 04/01/2015 10:02, Josh Wu a écrit :
> This patch series add ISI and ov2640 support on dts files.
> 
> As the ov2640 driver dt is still in review. The patch is in: https://patchwork.linuxtv.org/patch/27554/
> So I want to send this dt patch early for a review.
> 
> v1 -> v2:
>   1. add one more patch to change the pin name of ISI_MCK
>   2. rewrite the commit [4/8] ARM: at91: dts: sama5d3: change name of pinctrl_isi_{power,reset}.
>   3. move the common chip parts of ISI node to sama5d3.dtsi.
> 
> Bo Shen (3):
>   ARM: at91: dts: sama5d3: split isi pinctrl
>   ARM: at91: dts: sama5d3: add missing pins of isi
>   ARM: at91: dts: sama5d3: move the isi mck pin to mb
> 
> Josh Wu (5):
>   ARM: at91: dts: sama5d3: add isi clock
>   ARM: at91: dts: sama5d3: change name of pinctrl_isi_{power,reset}
>   ARM: at91: dts: sama5d3: change name of pinctrl of ISI_MCK
>   ARM: at91: dts: sama5d3: add ov2640 camera sensor support
>   ARM: at91: sama5: enable atmel-isi and ov2640 in defconfig

Josh,

It seems that this patch doesn't show up in the series: I only received
up to 6/8 patches (2 missing?). Can you please send it(them?)?

Bye,

>  arch/arm/boot/dts/sama5d3.dtsi    | 24 ++++++++++++++++++-----
>  arch/arm/boot/dts/sama5d3xmb.dtsi | 40 +++++++++++++++++++++++++++++++++++----
>  arch/arm/configs/sama5_defconfig  |  6 ++++++
>  3 files changed, 61 insertions(+), 9 deletions(-)
> 


-- 
Nicolas Ferre

[PATCH v2 7/8] ARM: at91: dts: sama5d3: add ov2640 camera sensor support

[Josh Wu]

According to v4l2 dt document, we add:
  a camera host: ISI port.
  a i2c camera sensor: ov2640 port.
to sama5d3xmb.dtsi.

The ov2640 node defines the pinctrls, clocks and refer to isi port.
The ISI node also has a reference to the ov2640 port.

Signed-off-by: Josh Wu <josh.wu-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
---
v1 -> v2:
  1. move the chip common part of ISI DT node to sama5d3.dtsi.
  2. the pck1 pinctrl name is changed.

 arch/arm/boot/dts/sama5d3.dtsi    |  6 ++++++
 arch/arm/boot/dts/sama5d3xmb.dtsi | 31 +++++++++++++++++++++++++++++--
 2 files changed, 35 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index ed734e9..af61d55 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -214,9 +214,15 @@
 				compatible = "atmel,at91sam9g45-isi";
 				reg = <0xf0034000 0x4000>;
 				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
 				clocks = <&isi_clk>;
 				clock-names = "isi_clk";
 				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
 			};
 
 			mmc1: mmc@f8000000 {
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index d9464fc..9fdb8a0 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -52,6 +52,29 @@
 				};
 			};
 
+			i2c1: i2c@f0018000 {
+				ov2640: camera@0x30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+					/* use pck1 for the master clock of ov2640 */
+					clocks = <&pck1>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pck1>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
+			};
+
 			usart1: serial@f0020000 {
 				dmas = <0>, <0>;	/*  Do not use DMA for usart1 */
 				pinctrl-names = "default";
@@ -60,8 +83,12 @@
 			};
 
 			isi: isi@f0034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+					};
+				};
 			};
 
 			mmc1: mmc@f8000000 {
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 8/8] ARM: at91: sama5: enable atmel-isi and ov2640 in defconfig

[Josh Wu]

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/configs/sama5_defconfig | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
index b58fb32..92f1d71 100644
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -139,6 +139,12 @@ CONFIG_POWER_RESET=y
 CONFIG_SSB=m
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_ACT8865=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_OV2640=y
+CONFIG_VIDEO_ATMEL_ISI=y
 CONFIG_FB=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
-- 
1.9.1

Re: [PATCH v2 0/8] ARM: at91: dts: sama5d3: add dt support for atmel isi and ov2640 sensor

[Josh Wu]

On 1/13/2015 11:05 PM, Nicolas Ferre wrote:
> Le 04/01/2015 10:02, Josh Wu a écrit :
>> This patch series add ISI and ov2640 support on dts files.
>>
>> As the ov2640 driver dt is still in review. The patch is in: https://patchwork.linuxtv.org/patch/27554/
>> So I want to send this dt patch early for a review.
>>
>> v1 -> v2:
>>    1. add one more patch to change the pin name of ISI_MCK
>>    2. rewrite the commit [4/8] ARM: at91: dts: sama5d3: change name of pinctrl_isi_{power,reset}.
>>    3. move the common chip parts of ISI node to sama5d3.dtsi.
>>
>> Bo Shen (3):
>>    ARM: at91: dts: sama5d3: split isi pinctrl
>>    ARM: at91: dts: sama5d3: add missing pins of isi
>>    ARM: at91: dts: sama5d3: move the isi mck pin to mb
>>
>> Josh Wu (5):
>>    ARM: at91: dts: sama5d3: add isi clock
>>    ARM: at91: dts: sama5d3: change name of pinctrl_isi_{power,reset}
>>    ARM: at91: dts: sama5d3: change name of pinctrl of ISI_MCK
>>    ARM: at91: dts: sama5d3: add ov2640 camera sensor support
>>    ARM: at91: sama5: enable atmel-isi and ov2640 in defconfig
> Josh,
>
> It seems that this patch doesn't show up in the series: I only received
> up to 6/8 patches (2 missing?). Can you please send it(them?)?

Thanks you, Nicolas. I am not aware that.
I just sent out the missing 7/8, 8/8 patches right now.

Best Regards,
Josh Wu

>
> Bye,
>
>>   arch/arm/boot/dts/sama5d3.dtsi    | 24 ++++++++++++++++++-----
>>   arch/arm/boot/dts/sama5d3xmb.dtsi | 40 +++++++++++++++++++++++++++++++++++----
>>   arch/arm/configs/sama5_defconfig  |  6 ++++++
>>   3 files changed, 61 insertions(+), 9 deletions(-)
>>
>

Re: [PATCH v2 0/8] ARM: at91: dts: sama5d3: add dt support for atmel isi and ov2640 sensor

[Alexandre Belloni]

Hi Nicolas,

BTW, you can add my ack on the remaining patches (5-7).

On 13/01/2015 at 16:05:57 +0100, Nicolas Ferre wrote :
> Le 04/01/2015 10:02, Josh Wu a écrit :
> > This patch series add ISI and ov2640 support on dts files.
> > 
> > As the ov2640 driver dt is still in review. The patch is in: https://patchwork.linuxtv.org/patch/27554/
> > So I want to send this dt patch early for a review.
> > 
> > v1 -> v2:
> >   1. add one more patch to change the pin name of ISI_MCK
> >   2. rewrite the commit [4/8] ARM: at91: dts: sama5d3: change name of pinctrl_isi_{power,reset}.
> >   3. move the common chip parts of ISI node to sama5d3.dtsi.
> > 
> > Bo Shen (3):
> >   ARM: at91: dts: sama5d3: split isi pinctrl
> >   ARM: at91: dts: sama5d3: add missing pins of isi
> >   ARM: at91: dts: sama5d3: move the isi mck pin to mb
> > 
> > Josh Wu (5):
> >   ARM: at91: dts: sama5d3: add isi clock
> >   ARM: at91: dts: sama5d3: change name of pinctrl_isi_{power,reset}
> >   ARM: at91: dts: sama5d3: change name of pinctrl of ISI_MCK
> >   ARM: at91: dts: sama5d3: add ov2640 camera sensor support
> >   ARM: at91: sama5: enable atmel-isi and ov2640 in defconfig
> 
> Josh,
> 
> It seems that this patch doesn't show up in the series: I only received
> up to 6/8 patches (2 missing?). Can you please send it(them?)?
> 
> Bye,
> 
> >  arch/arm/boot/dts/sama5d3.dtsi    | 24 ++++++++++++++++++-----
> >  arch/arm/boot/dts/sama5d3xmb.dtsi | 40 +++++++++++++++++++++++++++++++++++----
> >  arch/arm/configs/sama5_defconfig  |  6 ++++++
> >  3 files changed, 61 insertions(+), 9 deletions(-)
> > 
> 
> 
> -- 
> Nicolas Ferre

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Re: [PATCH v2 0/8] ARM: at91: dts: sama5d3: add dt support for atmel isi and ov2640 sensor

[Nicolas Ferre]

Le 04/01/2015 10:02, Josh Wu a écrit :
> This patch series add ISI and ov2640 support on dts files.
> 
> As the ov2640 driver dt is still in review. The patch is in: https://patchwork.linuxtv.org/patch/27554/
> So I want to send this dt patch early for a review.
> 
> v1 -> v2:
>   1. add one more patch to change the pin name of ISI_MCK
>   2. rewrite the commit [4/8] ARM: at91: dts: sama5d3: change name of pinctrl_isi_{power,reset}.
>   3. move the common chip parts of ISI node to sama5d3.dtsi.
> 
> Bo Shen (3):
>   ARM: at91: dts: sama5d3: split isi pinctrl
>   ARM: at91: dts: sama5d3: add missing pins of isi
>   ARM: at91: dts: sama5d3: move the isi mck pin to mb
> 
> Josh Wu (5):
>   ARM: at91: dts: sama5d3: add isi clock
>   ARM: at91: dts: sama5d3: change name of pinctrl_isi_{power,reset}
>   ARM: at91: dts: sama5d3: change name of pinctrl of ISI_MCK
>   ARM: at91: dts: sama5d3: add ov2640 camera sensor support
>   ARM: at91: sama5: enable atmel-isi and ov2640 in defconfig

The whole series:
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

stacked on top of at91-3.20-dt.
The defconfig update on his side on at91-3.20-defconfig

Bye,

>  arch/arm/boot/dts/sama5d3.dtsi    | 24 ++++++++++++++++++-----
>  arch/arm/boot/dts/sama5d3xmb.dtsi | 40 +++++++++++++++++++++++++++++++++++----
>  arch/arm/configs/sama5_defconfig  |  6 ++++++
>  3 files changed, 61 insertions(+), 9 deletions(-)
> 


-- 
Nicolas Ferre