From mboxrd@z Thu Jan 1 00:00:00 1970 From: Yingjoe Chen Subject: Re: [PATCH v4 4/5] ARM: mediatek: Add EINT support to MTK pinctrl driver. Date: Tue, 6 Jan 2015 17:16:57 +0800 Message-ID: <1420535817.17567.10.camel@mtksdaap41> References: <1418772873-19747-1-git-send-email-hongzhou.yang@mediatek.com> <1418772873-19747-5-git-send-email-hongzhou.yang@mediatek.com> <1418807365.6443.17.camel@mtksdaap41> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1418807365.6443.17.camel@mtksdaap41> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Linus Walleij Cc: Mark Rutland , devicetree@vger.kernel.org, Vladimir Murzin , maoguang.meng@mediatek.com, Russell King , srv_heupstream@mediatek.com, Pawel Moll , Ian Campbell , Hongzhou Yang , Catalin Marinas , Ashwin Chaugule , linux-kernel@vger.kernel.org, Rob Herring , Matthias Brugger , alan.cheng@mediatek.com, toby.liu@mediatek.com, Sascha Hauer , Kumar Gala , Grant Likely , dandan.he@mediatek.com, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org On Wed, 2014-12-17 at 17:09 +0800, Yingjoe Chen wrote: > On Wed, 2014-12-17 at 07:34 +0800, Hongzhou Yang wrote: > > From: Maoguang Meng > > > > MTK SoC support external interrupt(EINT) from most SoC pins. > > Add EINT support to pinctrl driver. > > > > Signed-off-by: Maoguang Meng > > Signed-off-by: Hongzhou Yang > > Hi Linus, > > This patch add EINT support to the pinctrl driver. We've surveyed > GPIOLIB_IRQCHIP, but we didn't use it because: > > - Not every GPIO pin support interrupt. > - EINT use a different numbering to GPIO. eg, from the mt8135 table, > GPIO29 is EINT158. It is more nature & efficient to use EINT number as > hwirq. > > + MTK_EINT_FUNCTION(2, 158), > + MTK_FUNCTION(0, "GPIO29"), Hi Linus, After further looking into this, we could use GPIOLIB_IRQCHIP if we add an extension gpiochip_irqchip_add() to accept interrupt numbers and custom .to_irq function for our SoC. We could still reuse other code GPIOLIB_IRQCHIP provide. Please let me know what you think about this idea. Thanks. Joe.C