From: Murali Karicheri <m-karicheri2@ti.com>
To: joro@8bytes.org, grant.likely@linaro.org, robh+dt@kernel.org,
iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, bhelgaas@google.com,
linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
will.deacon@arm.com, linux@arm.linux.org.uk, arnd@arndb.de
Cc: Murali Karicheri <m-karicheri2@ti.com>
Subject: [PATCH v3 2/4] of: move of_dma_configure() to device,c to help re-use
Date: Wed, 7 Jan 2015 13:49:52 -0500 [thread overview]
Message-ID: <1420656594-8908-3-git-send-email-m-karicheri2@ti.com> (raw)
In-Reply-To: <1420656594-8908-1-git-send-email-m-karicheri2@ti.com>
Move of_dma_configure() to device.c so that same function can be re-used
for PCI devices to obtain DMA configuration from DT. Also add a second
argument so that for PCI, DT node of root bus host bridge can be used to
obtain the DMA configuration for the slave PCI device. Additionally fix
the dma-range size when the DT attribute is missing. i.e set size to
dev->coherent_dma_mask + 1 instead of dev->coherent_dma_mask.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
---
drivers/of/device.c | 58 +++++++++++++++++++++++++++++++++++++++++++++
drivers/of/platform.c | 58 ++-------------------------------------------
include/linux/of_device.h | 2 ++
3 files changed, 62 insertions(+), 56 deletions(-)
diff --git a/drivers/of/device.c b/drivers/of/device.c
index 46d6c75c..ccbc958 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -2,6 +2,9 @@
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/of_iommu.h>
+#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
@@ -66,6 +69,61 @@ int of_device_add(struct platform_device *ofdev)
return device_add(&ofdev->dev);
}
+/**
+ * of_dma_configure - Setup DMA configuration
+ * @dev: Device to apply DMA configuration
+ * @np: ptr to of node having dma configuration
+ *
+ * Try to get devices's DMA configuration from DT and update it
+ * accordingly.
+ *
+ * In case if platform code need to use own special DMA configuration,it
+ * can use Platform bus notifier and handle BUS_NOTIFY_ADD_DEVICE event
+ * to fix up DMA configuration.
+ */
+void of_dma_configure(struct device *dev, struct device_node *np)
+{
+ u64 dma_addr, paddr, size;
+ int ret;
+ bool coherent;
+ unsigned long offset;
+ struct iommu_ops *iommu;
+
+ /*
+ * Set default dma-mask to 32 bit. Drivers are expected to setup
+ * the correct supported dma_mask.
+ */
+ dev->coherent_dma_mask = DMA_BIT_MASK(32);
+
+ /*
+ * Set it to coherent_dma_mask by default if the architecture
+ * code has not set it.
+ */
+ if (!dev->dma_mask)
+ dev->dma_mask = &dev->coherent_dma_mask;
+
+ ret = of_dma_get_range(np, &dma_addr, &paddr, &size);
+ if (ret < 0) {
+ dma_addr = offset = 0;
+ size = dev->coherent_dma_mask + 1;
+ } else {
+ offset = PFN_DOWN(paddr - dma_addr);
+ dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", offset);
+ }
+ dev->dma_pfn_offset = offset;
+
+ coherent = of_dma_is_coherent(np);
+ dev_dbg(dev, "device is%sdma coherent\n",
+ coherent ? " " : " not ");
+
+ iommu = of_iommu_configure(dev, np);
+ dev_dbg(dev, "device is%sbehind an iommu\n",
+ iommu ? " " : " not ");
+
+ arch_setup_dma_ops(dev, dma_addr, size, iommu, coherent);
+}
+EXPORT_SYMBOL_GPL(of_dma_configure);
+
int of_device_register(struct platform_device *pdev)
{
device_initialize(&pdev->dev);
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 7675b79..6403501 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -19,7 +19,6 @@
#include <linux/slab.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
-#include <linux/of_iommu.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
@@ -150,59 +149,6 @@ struct platform_device *of_device_alloc(struct device_node *np,
}
EXPORT_SYMBOL(of_device_alloc);
-/**
- * of_dma_configure - Setup DMA configuration
- * @dev: Device to apply DMA configuration
- *
- * Try to get devices's DMA configuration from DT and update it
- * accordingly.
- *
- * In case if platform code need to use own special DMA configuration,it
- * can use Platform bus notifier and handle BUS_NOTIFY_ADD_DEVICE event
- * to fix up DMA configuration.
- */
-static void of_dma_configure(struct device *dev)
-{
- u64 dma_addr, paddr, size;
- int ret;
- bool coherent;
- unsigned long offset;
- struct iommu_ops *iommu;
-
- /*
- * Set default dma-mask to 32 bit. Drivers are expected to setup
- * the correct supported dma_mask.
- */
- dev->coherent_dma_mask = DMA_BIT_MASK(32);
-
- /*
- * Set it to coherent_dma_mask by default if the architecture
- * code has not set it.
- */
- if (!dev->dma_mask)
- dev->dma_mask = &dev->coherent_dma_mask;
-
- ret = of_dma_get_range(dev->of_node, &dma_addr, &paddr, &size);
- if (ret < 0) {
- dma_addr = offset = 0;
- size = dev->coherent_dma_mask;
- } else {
- offset = PFN_DOWN(paddr - dma_addr);
- dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", offset);
- }
- dev->dma_pfn_offset = offset;
-
- coherent = of_dma_is_coherent(dev->of_node);
- dev_dbg(dev, "device is%sdma coherent\n",
- coherent ? " " : " not ");
-
- iommu = of_iommu_configure(dev, dev->of_node);
- dev_dbg(dev, "device is%sbehind an iommu\n",
- iommu ? " " : " not ");
-
- arch_setup_dma_ops(dev, dma_addr, size, iommu, coherent);
-}
-
static void of_dma_deconfigure(struct device *dev)
{
arch_teardown_dma_ops(dev);
@@ -236,7 +182,7 @@ static struct platform_device *of_platform_device_create_pdata(
dev->dev.bus = &platform_bus_type;
dev->dev.platform_data = platform_data;
- of_dma_configure(&dev->dev);
+ of_dma_configure(&dev->dev, dev->dev.of_node);
if (of_device_add(dev) != 0) {
of_dma_deconfigure(&dev->dev);
@@ -299,7 +245,7 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
dev_set_name(&dev->dev, "%s", bus_id);
else
of_device_make_bus_id(&dev->dev);
- of_dma_configure(&dev->dev);
+ of_dma_configure(&dev->dev, dev->dev.of_node);
/* Allow the HW Peripheral ID to be overridden */
prop = of_get_property(node, "arm,primecell-periphid", NULL);
diff --git a/include/linux/of_device.h b/include/linux/of_device.h
index ef37021..c661496 100644
--- a/include/linux/of_device.h
+++ b/include/linux/of_device.h
@@ -53,6 +53,7 @@ static inline struct device_node *of_cpu_device_node_get(int cpu)
return of_node_get(cpu_dev->of_node);
}
+void of_dma_configure(struct device *dev, struct device_node *np);
#else /* CONFIG_OF */
static inline int of_driver_match_device(struct device *dev,
@@ -90,6 +91,7 @@ static inline struct device_node *of_cpu_device_node_get(int cpu)
{
return NULL;
}
+void of_dma_configure(struct device *dev, struct device_node *np) { }
#endif /* CONFIG_OF */
#endif /* _LINUX_OF_DEVICE_H */
--
1.7.9.5
next prev parent reply other threads:[~2015-01-07 18:49 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-07 18:49 [PATCH v3 0/4] PCI: get DMA configuration from parent device Murali Karicheri
2015-01-07 18:49 ` Murali Karicheri [this message]
2015-01-07 23:37 ` [PATCH v3 2/4] of: move of_dma_configure() to device,c to help re-use Rob Herring
[not found] ` <CAL_Jsq+pKeXuGnZV_NYHn6iZgeOs404OPhcUb0FJs=-7j2P1Ug-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-01-08 8:40 ` [PATCH v3 2/4] of: move of_dma_configure() to device, c " Arnd Bergmann
2015-01-08 19:26 ` [PATCH v3 2/4] of: move of_dma_configure() to device,c " Murali Karicheri
2015-01-08 22:24 ` Arnd Bergmann
2015-01-08 23:44 ` Murali Karicheri
[not found] ` <54AF165F.7070909-l0cyMroinI0@public.gmane.org>
2015-01-09 0:05 ` Arnd Bergmann
2015-01-09 15:34 ` Rob Herring
2015-01-23 18:19 ` Murali Karicheri
2015-01-23 18:35 ` Rob Herring
2015-01-07 18:49 ` [PATCH v3 3/4] of/pci: add of_pci_dma_configure() update dma configuration Murali Karicheri
2015-01-08 16:06 ` Will Deacon
2015-01-08 19:52 ` Murali Karicheri
[not found] ` <54AEDFED.8060008-l0cyMroinI0@public.gmane.org>
2015-01-08 22:25 ` Arnd Bergmann
2015-01-08 22:46 ` Murali Karicheri
2015-01-09 11:32 ` Will Deacon
2015-01-07 18:49 ` [PATCH v3 4/4] PCI: update dma configuration from DT Murali Karicheri
2015-01-07 21:18 ` [PATCH v3 0/4] PCI: get DMA configuration from parent device Arnd Bergmann
2015-01-07 23:04 ` Murali Karicheri
[not found] ` <54ADBB89.8070503-l0cyMroinI0@public.gmane.org>
2015-01-08 8:56 ` Arnd Bergmann
2015-01-08 15:54 ` Will Deacon
2015-01-08 22:27 ` Arnd Bergmann
2015-01-08 22:46 ` Murali Karicheri
[not found] ` <1420656594-8908-1-git-send-email-m-karicheri2-l0cyMroinI0@public.gmane.org>
2015-01-07 18:49 ` [PATCH v3 1/4] of: iommu: add ptr to OF node arg to of_iommu_configure() Murali Karicheri
[not found] ` <1420656594-8908-2-git-send-email-m-karicheri2-l0cyMroinI0@public.gmane.org>
2015-01-07 23:30 ` Rob Herring
2015-01-08 18:29 ` Murali Karicheri
2015-01-07 23:05 ` [PATCH v3 0/4] PCI: get DMA configuration from parent device Murali Karicheri
[not found] ` <54ADBBCF.8020206-l0cyMroinI0@public.gmane.org>
2015-01-07 23:08 ` Bjorn Helgaas
[not found] ` <CAErSpo46UAn9ckbzrgzAoQbu2D=oyOOL_rO24NWEg_iDLSuCLA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-01-08 15:52 ` Murali Karicheri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1420656594-8908-3-git-send-email-m-karicheri2@ti.com \
--to=m-karicheri2@ti.com \
--cc=arnd@arndb.de \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=grant.likely@linaro.org \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=robh+dt@kernel.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).