[PATCHv2 0/2] Driver for TI tlc59116 16 Channel i2c LED driver

[PATCHv2 0/2] Driver for TI tlc59116 16 Channel i2c LED driver

[Andrew Lunn]

This patchset is a driver for the TI tlc59116 16 Channel i2c LED
driver. This driver is used on the Belkin WRT1900AC access point and
the C code is derived from code Belkin contributed to OpenWRT.
However it has been extensively re-written, and a device tree binding
added to replace platform data.

Cc: Matthew.Fatheree@belkin.com

Since v1:
      s/uint8_t/u8/g
      Remove empty line
      Removed #gpio-cells
      Added select REGMAP_I2C
      Sorted #includes into alphabetic order
      Added missing MODULE_DEVICE_TABLE(of, ...)
      Check return value of regmap_write()
      Simplified tlc59116_set_mode()

Andrew Lunn (2):
  leds: tlc59116: Document binding for the TI 16 Channel i2c LED driver
  leds: tlc59116: Driver for the TI 16 Channel i2c LED driver

 .../devicetree/bindings/leds/leds-tlc59116.txt     |  41 ++++
 drivers/leds/Kconfig                               |   7 +
 drivers/leds/Makefile                              |   1 +
 drivers/leds/leds-tlc59116.c                       | 253 +++++++++++++++++++++
 4 files changed, 302 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-tlc59116.txt
 create mode 100644 drivers/leds/leds-tlc59116.c

-- 
2.1.3

[PATCHv2 1/2] leds: tlc59116: Document binding for the TI 16 Channel i2c LED driver

[Andrew Lunn]

Document the binding for the TLC59116 LED driver.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Cc: Matthew.Fatheree@belkin.com
---
 .../devicetree/bindings/leds/leds-tlc59116.txt     | 40 ++++++++++++++++++++++
 1 file changed, 40 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-tlc59116.txt

diff --git a/Documentation/devicetree/bindings/leds/leds-tlc59116.txt b/Documentation/devicetree/bindings/leds/leds-tlc59116.txt
new file mode 100644
index 000000000000..45c2123774d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-tlc59116.txt
@@ -0,0 +1,40 @@
+LEDs connected to tcl59116
+
+Required properties
+- compatible: should be "ti,tlc59116"
+- #address-cells: must be 1
+- #size-cells: must be 0
+- reg: typically 0x68
+
+Each led is represented as a sub-node of the ti,,tlc59116.
+See Documentation/devicetree/bindings/leds/common.txt
+
+LED sub-node properties:
+- reg: number of LED line, 0 to 15
+- label: (optional) name of LED
+- linux,default-trigger : (optional)
+
+Examples:
+
+tlc59116@68 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "ti,tlc59116";
+	reg = <0x68>;
+
+	wan@0 {
+		label = "wrt1900ac:amber:wan";
+		reg = <0x0>;
+	};
+
+	2g@2 {
+		label = "wrt1900ac:white:2g";
+		reg = <0x2>;
+	};
+
+	alive@9 {
+		label = "wrt1900ac:green:alive";
+		reg = <0x9>;
+		linux,default_trigger = "heartbeat";
+	};
+};
-- 
2.1.3

[PATCHv2 2/2] leds: tlc59116: Driver for the TI 16 Channel i2c LED driver

[Andrew Lunn]

The TLC59116 is an I2C bus controlled 16-channel LED driver.  Each LED
output has its own 8-bit fixed-frequency PWM controller to control the
brightness of the LED.

This is based on a driver from Belkin, but has been extensively
rewritten.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Cc: Matthew.Fatheree@belkin.com
---
 drivers/leds/Kconfig         |   8 ++
 drivers/leds/Makefile        |   1 +
 drivers/leds/leds-tlc59116.c | 252 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 261 insertions(+)
 create mode 100644 drivers/leds/leds-tlc59116.c

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index a6c3d2f153f3..8fc283c01673 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -457,6 +457,14 @@ config LEDS_TCA6507
 	  LED driver chips accessed via the I2C bus.
 	  Driver support brightness control and hardware-assisted blinking.
 
+config LEDS_TLC59116
+	tristate "LED driver for TLC59116F controllers"
+	depends on LEDS_CLASS && I2C
+	select REGMAP_I2C
+	help
+	  This option enables support for Texas Instruments TLC59116F
+	  LED controller.
+
 config LEDS_MAX8997
 	tristate "LED support for MAX8997 PMIC"
 	depends on LEDS_CLASS && MFD_MAX8997
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 1c65a191d907..8e7d20acfa7b 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_LEDS_LP8501)		+= leds-lp8501.o
 obj-$(CONFIG_LEDS_LP8788)		+= leds-lp8788.o
 obj-$(CONFIG_LEDS_LP8860)		+= leds-lp8860.o
 obj-$(CONFIG_LEDS_TCA6507)		+= leds-tca6507.o
+obj-$(CONFIG_LEDS_TLC59116)		+= leds-tlc59116.o
 obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
 obj-$(CONFIG_LEDS_IPAQ_MICRO)		+= leds-ipaq-micro.o
 obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
diff --git a/drivers/leds/leds-tlc59116.c b/drivers/leds/leds-tlc59116.c
new file mode 100644
index 000000000000..9ed8175e7992
--- /dev/null
+++ b/drivers/leds/leds-tlc59116.c
@@ -0,0 +1,252 @@
+/*
+ * Copyright 2014 Belkin Inc.
+ * Copyright 2014 Andrew Lunn <andrew@lunn.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#define TLC59116_LEDS		16
+
+#define TLC59116_REG_MODE1	0x00	/* Mode register 0 */
+#define MODE1_RESPON_ADDR_MASK	0xF0
+#define MODE1_NORMAL_MODE	(0 << 4)
+#define MODE1_SPEED_MODE	(1 << 4)
+
+#define TLC59116_REG_MODE2	0x01	/* Mode register 1 */
+#define MODE2_DIM		(0 << 5)
+#define MODE2_BLINK		(1 << 5)
+#define MODE2_OCH_STOP		(0 << 3)
+#define MODE2_OCH_ACK		(1 << 3)
+
+#define TLC59116_REG_PWM(x)	(0x02 + x)
+
+#define TLC59116_REG_GRPPWM	0x12
+#define TLC59116_REG_GRPFREQ	0x13
+
+/* LED Driver Output State, determine the source that drives LED outputs */
+#define TLC59116_REG_LEDOUT(x)	(0x14 + (x >> 2))
+#define TLC59116_LED_OFF	0x0	/* Output LOW */
+#define TLC59116_LED_ON		0x1	/* Output HI-Z */
+#define TLC59116_DIM		0x2	/* Dimming */
+#define TLC59116_BLINK		0x3	/* Blinking */
+#define LED_MASK		0x3
+
+#define ldev_to_led(c)		container_of(c, struct tlc59116_led, ldev)
+#define work_to_led(work)	container_of(work, struct tlc59116_led, work)
+
+struct tlc59116_led {
+	bool active;
+	struct regmap *regmap;
+	int led_no;
+	struct led_classdev ldev;
+	struct work_struct work;
+};
+
+struct tlc59116_priv {
+	struct tlc59116_led leds[TLC59116_LEDS];
+};
+
+static int
+tlc59116_set_mode(struct regmap *regmap, u8 mode)
+{
+	u8 val = 0;
+	int err;
+
+	if ((mode != MODE2_DIM) && (mode != MODE2_BLINK))
+		mode = MODE2_DIM;
+
+	/* Configure MODE1 register */
+	err = regmap_write(regmap, TLC59116_REG_MODE1, MODE1_NORMAL_MODE);
+	if (err)
+		return err;
+
+	/* Configure MODE2 Reg */
+	val |= MODE2_OCH_STOP;
+	val |= mode;
+
+	return regmap_write(regmap, TLC59116_REG_MODE2, val);
+}
+
+static int
+tlc59116_set_led(struct tlc59116_led *led, u8 val)
+{
+	struct regmap *regmap = led->regmap;
+	int i = (led->led_no % 4) * 2;
+	char addr = TLC59116_REG_LEDOUT(led->led_no);
+	unsigned int mask = LED_MASK << i;
+
+	val = val << i;
+
+	return regmap_update_bits(regmap, addr, mask, val);
+}
+
+static void
+tlc59116_led_work(struct work_struct *work)
+{
+	struct tlc59116_led *led = work_to_led(work);
+	struct regmap *regmap = led->regmap;
+	int err;
+	u8 pwm;
+
+	pwm = TLC59116_REG_PWM(led->led_no);
+	err = regmap_write(regmap, pwm, led->ldev.brightness);
+	if (err)
+		dev_err(led->ldev.dev, "Failed setting brightness\n");
+}
+
+static void
+tlc59116_led_set(struct led_classdev *led_cdev, enum led_brightness value)
+{
+	struct tlc59116_led *led = ldev_to_led(led_cdev);
+
+	led->ldev.brightness = value;
+	schedule_work(&led->work);
+}
+
+static void
+tlc59116_destroy_devices(struct tlc59116_priv *priv, int i)
+{
+	while (--i >= 0) {
+		if (priv->leds[i].active) {
+			led_classdev_unregister(&priv->leds[i].ldev);
+			cancel_work_sync(&priv->leds[i].work);
+		}
+	}
+}
+
+static int
+tlc59116_configure(struct device *dev,
+		   struct tlc59116_priv *priv,
+		   struct regmap *regmap)
+{
+	int i, err = 0;
+
+	tlc59116_set_mode(regmap, MODE2_DIM);
+	for (i = 0; i < TLC59116_LEDS; i++) {
+		struct tlc59116_led *led = &priv->leds[i];
+
+		if (!led->active)
+			continue;
+
+		led->regmap = regmap;
+		led->led_no = i;
+		led->ldev.brightness_set = tlc59116_led_set;
+		led->ldev.max_brightness = LED_FULL;
+		INIT_WORK(&led->work, tlc59116_led_work);
+		err = led_classdev_register(dev, &led->ldev);
+		if (err < 0) {
+			dev_err(dev, "couldn't register LED %s\n",
+				led->ldev.name);
+			goto exit;
+		}
+		tlc59116_set_led(led, TLC59116_DIM);
+	}
+
+	return 0;
+
+exit:
+	tlc59116_destroy_devices(priv, i);
+	return err;
+}
+
+static const struct regmap_config tlc59116_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0x1e,
+};
+
+static int
+tlc59116_probe(struct i2c_client *client,
+	       const struct i2c_device_id *id)
+{
+	struct tlc59116_priv *priv = i2c_get_clientdata(client);
+	struct device *dev = &client->dev;
+	struct device_node *np = client->dev.of_node, *child;
+	struct regmap *regmap;
+	int err, count, reg;
+
+	count = of_get_child_count(np);
+	if (!count || count > TLC59116_LEDS)
+		return -EINVAL;
+
+	if (!i2c_check_functionality(client->adapter,
+		I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	regmap = devm_regmap_init_i2c(client, &tlc59116_regmap);
+	if (IS_ERR(regmap)) {
+		err = PTR_ERR(regmap);
+		dev_err(dev, "Failed to allocate register map: %d\n", err);
+		return err;
+	}
+
+	i2c_set_clientdata(client, priv);
+
+	for_each_child_of_node(np, child) {
+		err = of_property_read_u32(child, "reg", &reg);
+		if (err)
+			return err;
+		if (reg < 0 || reg >= TLC59116_LEDS)
+			return -EINVAL;
+		if (priv->leds[reg].active)
+			return -EINVAL;
+		priv->leds[reg].active = true;
+		priv->leds[reg].ldev.name =
+			of_get_property(child, "label", NULL) ? : child->name;
+		priv->leds[reg].ldev.default_trigger =
+			of_get_property(child, "linux,default-trigger", NULL);
+	}
+	return tlc59116_configure(dev, priv, regmap);
+}
+
+static int
+tlc59116_remove(struct i2c_client *client)
+{
+	struct tlc59116_priv *priv = i2c_get_clientdata(client);
+
+	tlc59116_destroy_devices(priv, TLC59116_LEDS);
+
+	return 0;
+}
+
+static const struct of_device_id of_tlc59116_leds_match[] = {
+	{ .compatible = "ti,tlc59116", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_tlc59116_leds_match);
+
+static const struct i2c_device_id tlc59116_id[] = {
+	{ "tlc59116" },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, tlc59116_id);
+
+static struct i2c_driver tlc59116_driver = {
+	.driver = {
+		.name = "tlc59116",
+		.of_match_table = of_match_ptr(of_tlc59116_leds_match),
+	},
+	.probe = tlc59116_probe,
+	.remove = tlc59116_remove,
+	.id_table = tlc59116_id,
+};
+
+module_i2c_driver(tlc59116_driver);
+
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("TLC59116 LED driver");
-- 
2.1.3

Re: [PATCHv2 2/2] leds: tlc59116: Driver for the TI 16 Channel i2c LED driver

[Bryan Wu]

On Fri, Jan 9, 2015 at 2:45 PM, Andrew Lunn <andrew@lunn.ch> wrote:
> The TLC59116 is an I2C bus controlled 16-channel LED driver.  Each LED
> output has its own 8-bit fixed-frequency PWM controller to control the
> brightness of the LED.
>
> This is based on a driver from Belkin, but has been extensively
> rewritten.
>
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> Cc: Matthew.Fatheree@belkin.com

Looks good, applied to my tree.
-Bryan

> ---
>  drivers/leds/Kconfig         |   8 ++
>  drivers/leds/Makefile        |   1 +
>  drivers/leds/leds-tlc59116.c | 252 +++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 261 insertions(+)
>  create mode 100644 drivers/leds/leds-tlc59116.c
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index a6c3d2f153f3..8fc283c01673 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -457,6 +457,14 @@ config LEDS_TCA6507
>           LED driver chips accessed via the I2C bus.
>           Driver support brightness control and hardware-assisted blinking.
>
> +config LEDS_TLC59116
> +       tristate "LED driver for TLC59116F controllers"
> +       depends on LEDS_CLASS && I2C
> +       select REGMAP_I2C
> +       help
> +         This option enables support for Texas Instruments TLC59116F
> +         LED controller.
> +
>  config LEDS_MAX8997
>         tristate "LED support for MAX8997 PMIC"
>         depends on LEDS_CLASS && MFD_MAX8997
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 1c65a191d907..8e7d20acfa7b 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -30,6 +30,7 @@ obj-$(CONFIG_LEDS_LP8501)             += leds-lp8501.o
>  obj-$(CONFIG_LEDS_LP8788)              += leds-lp8788.o
>  obj-$(CONFIG_LEDS_LP8860)              += leds-lp8860.o
>  obj-$(CONFIG_LEDS_TCA6507)             += leds-tca6507.o
> +obj-$(CONFIG_LEDS_TLC59116)            += leds-tlc59116.o
>  obj-$(CONFIG_LEDS_CLEVO_MAIL)          += leds-clevo-mail.o
>  obj-$(CONFIG_LEDS_IPAQ_MICRO)          += leds-ipaq-micro.o
>  obj-$(CONFIG_LEDS_HP6XX)               += leds-hp6xx.o
> diff --git a/drivers/leds/leds-tlc59116.c b/drivers/leds/leds-tlc59116.c
> new file mode 100644
> index 000000000000..9ed8175e7992
> --- /dev/null
> +++ b/drivers/leds/leds-tlc59116.c
> @@ -0,0 +1,252 @@
> +/*
> + * Copyright 2014 Belkin Inc.
> + * Copyright 2014 Andrew Lunn <andrew@lunn.ch>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/leds.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <linux/workqueue.h>
> +
> +#define TLC59116_LEDS          16
> +
> +#define TLC59116_REG_MODE1     0x00    /* Mode register 0 */
> +#define MODE1_RESPON_ADDR_MASK 0xF0
> +#define MODE1_NORMAL_MODE      (0 << 4)
> +#define MODE1_SPEED_MODE       (1 << 4)
> +
> +#define TLC59116_REG_MODE2     0x01    /* Mode register 1 */
> +#define MODE2_DIM              (0 << 5)
> +#define MODE2_BLINK            (1 << 5)
> +#define MODE2_OCH_STOP         (0 << 3)
> +#define MODE2_OCH_ACK          (1 << 3)
> +
> +#define TLC59116_REG_PWM(x)    (0x02 + x)
> +
> +#define TLC59116_REG_GRPPWM    0x12
> +#define TLC59116_REG_GRPFREQ   0x13
> +
> +/* LED Driver Output State, determine the source that drives LED outputs */
> +#define TLC59116_REG_LEDOUT(x) (0x14 + (x >> 2))
> +#define TLC59116_LED_OFF       0x0     /* Output LOW */
> +#define TLC59116_LED_ON                0x1     /* Output HI-Z */
> +#define TLC59116_DIM           0x2     /* Dimming */
> +#define TLC59116_BLINK         0x3     /* Blinking */
> +#define LED_MASK               0x3
> +
> +#define ldev_to_led(c)         container_of(c, struct tlc59116_led, ldev)
> +#define work_to_led(work)      container_of(work, struct tlc59116_led, work)
> +
> +struct tlc59116_led {
> +       bool active;
> +       struct regmap *regmap;
> +       int led_no;
> +       struct led_classdev ldev;
> +       struct work_struct work;
> +};
> +
> +struct tlc59116_priv {
> +       struct tlc59116_led leds[TLC59116_LEDS];
> +};
> +
> +static int
> +tlc59116_set_mode(struct regmap *regmap, u8 mode)
> +{
> +       u8 val = 0;
> +       int err;
> +
> +       if ((mode != MODE2_DIM) && (mode != MODE2_BLINK))
> +               mode = MODE2_DIM;
> +
> +       /* Configure MODE1 register */
> +       err = regmap_write(regmap, TLC59116_REG_MODE1, MODE1_NORMAL_MODE);
> +       if (err)
> +               return err;
> +
> +       /* Configure MODE2 Reg */
> +       val |= MODE2_OCH_STOP;
> +       val |= mode;
> +
> +       return regmap_write(regmap, TLC59116_REG_MODE2, val);
> +}
> +
> +static int
> +tlc59116_set_led(struct tlc59116_led *led, u8 val)
> +{
> +       struct regmap *regmap = led->regmap;
> +       int i = (led->led_no % 4) * 2;
> +       char addr = TLC59116_REG_LEDOUT(led->led_no);
> +       unsigned int mask = LED_MASK << i;
> +
> +       val = val << i;
> +
> +       return regmap_update_bits(regmap, addr, mask, val);
> +}
> +
> +static void
> +tlc59116_led_work(struct work_struct *work)
> +{
> +       struct tlc59116_led *led = work_to_led(work);
> +       struct regmap *regmap = led->regmap;
> +       int err;
> +       u8 pwm;
> +
> +       pwm = TLC59116_REG_PWM(led->led_no);
> +       err = regmap_write(regmap, pwm, led->ldev.brightness);
> +       if (err)
> +               dev_err(led->ldev.dev, "Failed setting brightness\n");
> +}
> +
> +static void
> +tlc59116_led_set(struct led_classdev *led_cdev, enum led_brightness value)
> +{
> +       struct tlc59116_led *led = ldev_to_led(led_cdev);
> +
> +       led->ldev.brightness = value;
> +       schedule_work(&led->work);
> +}
> +
> +static void
> +tlc59116_destroy_devices(struct tlc59116_priv *priv, int i)
> +{
> +       while (--i >= 0) {
> +               if (priv->leds[i].active) {
> +                       led_classdev_unregister(&priv->leds[i].ldev);
> +                       cancel_work_sync(&priv->leds[i].work);
> +               }
> +       }
> +}
> +
> +static int
> +tlc59116_configure(struct device *dev,
> +                  struct tlc59116_priv *priv,
> +                  struct regmap *regmap)
> +{
> +       int i, err = 0;
> +
> +       tlc59116_set_mode(regmap, MODE2_DIM);
> +       for (i = 0; i < TLC59116_LEDS; i++) {
> +               struct tlc59116_led *led = &priv->leds[i];
> +
> +               if (!led->active)
> +                       continue;
> +
> +               led->regmap = regmap;
> +               led->led_no = i;
> +               led->ldev.brightness_set = tlc59116_led_set;
> +               led->ldev.max_brightness = LED_FULL;
> +               INIT_WORK(&led->work, tlc59116_led_work);
> +               err = led_classdev_register(dev, &led->ldev);
> +               if (err < 0) {
> +                       dev_err(dev, "couldn't register LED %s\n",
> +                               led->ldev.name);
> +                       goto exit;
> +               }
> +               tlc59116_set_led(led, TLC59116_DIM);
> +       }
> +
> +       return 0;
> +
> +exit:
> +       tlc59116_destroy_devices(priv, i);
> +       return err;
> +}
> +
> +static const struct regmap_config tlc59116_regmap = {
> +       .reg_bits = 8,
> +       .val_bits = 8,
> +       .max_register = 0x1e,
> +};
> +
> +static int
> +tlc59116_probe(struct i2c_client *client,
> +              const struct i2c_device_id *id)
> +{
> +       struct tlc59116_priv *priv = i2c_get_clientdata(client);
> +       struct device *dev = &client->dev;
> +       struct device_node *np = client->dev.of_node, *child;
> +       struct regmap *regmap;
> +       int err, count, reg;
> +
> +       count = of_get_child_count(np);
> +       if (!count || count > TLC59116_LEDS)
> +               return -EINVAL;
> +
> +       if (!i2c_check_functionality(client->adapter,
> +               I2C_FUNC_SMBUS_BYTE_DATA))
> +               return -EIO;
> +
> +       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +       if (!priv)
> +               return -ENOMEM;
> +
> +       regmap = devm_regmap_init_i2c(client, &tlc59116_regmap);
> +       if (IS_ERR(regmap)) {
> +               err = PTR_ERR(regmap);
> +               dev_err(dev, "Failed to allocate register map: %d\n", err);
> +               return err;
> +       }
> +
> +       i2c_set_clientdata(client, priv);
> +
> +       for_each_child_of_node(np, child) {
> +               err = of_property_read_u32(child, "reg", &reg);
> +               if (err)
> +                       return err;
> +               if (reg < 0 || reg >= TLC59116_LEDS)
> +                       return -EINVAL;
> +               if (priv->leds[reg].active)
> +                       return -EINVAL;
> +               priv->leds[reg].active = true;
> +               priv->leds[reg].ldev.name =
> +                       of_get_property(child, "label", NULL) ? : child->name;
> +               priv->leds[reg].ldev.default_trigger =
> +                       of_get_property(child, "linux,default-trigger", NULL);
> +       }
> +       return tlc59116_configure(dev, priv, regmap);
> +}
> +
> +static int
> +tlc59116_remove(struct i2c_client *client)
> +{
> +       struct tlc59116_priv *priv = i2c_get_clientdata(client);
> +
> +       tlc59116_destroy_devices(priv, TLC59116_LEDS);
> +
> +       return 0;
> +}
> +
> +static const struct of_device_id of_tlc59116_leds_match[] = {
> +       { .compatible = "ti,tlc59116", },
> +       {},
> +};
> +MODULE_DEVICE_TABLE(of, of_tlc59116_leds_match);
> +
> +static const struct i2c_device_id tlc59116_id[] = {
> +       { "tlc59116" },
> +       {},
> +};
> +MODULE_DEVICE_TABLE(i2c, tlc59116_id);
> +
> +static struct i2c_driver tlc59116_driver = {
> +       .driver = {
> +               .name = "tlc59116",
> +               .of_match_table = of_match_ptr(of_tlc59116_leds_match),
> +       },
> +       .probe = tlc59116_probe,
> +       .remove = tlc59116_remove,
> +       .id_table = tlc59116_id,
> +};
> +
> +module_i2c_driver(tlc59116_driver);
> +
> +MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("TLC59116 LED driver");
> --
> 2.1.3
>

Re: [PATCHv2 2/2] leds: tlc59116: Driver for the TI 16 Channel i2c LED driver

[Andrew Lunn]

On Tue, Jan 13, 2015 at 10:55:23AM -0800, Bryan Wu wrote:
> On Fri, Jan 9, 2015 at 2:45 PM, Andrew Lunn <andrew@lunn.ch> wrote:
> > The TLC59116 is an I2C bus controlled 16-channel LED driver.  Each LED
> > output has its own 8-bit fixed-frequency PWM controller to control the
> > brightness of the LED.
> >
> > This is based on a driver from Belkin, but has been extensively
> > rewritten.
> >
> > Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> > Cc: Matthew.Fatheree@belkin.com
> 
> Looks good, applied to my tree.

Great, thanks.

Will you also take the device tree binding document patch?

Thanks
	Andrew

Re: [PATCHv2 2/2] leds: tlc59116: Driver for the TI 16 Channel i2c LED driver

[Bryan Wu]

On Tue, Jan 13, 2015 at 11:13 AM, Andrew Lunn <andrew@lunn.ch> wrote:
> On Tue, Jan 13, 2015 at 10:55:23AM -0800, Bryan Wu wrote:
>> On Fri, Jan 9, 2015 at 2:45 PM, Andrew Lunn <andrew@lunn.ch> wrote:
>> > The TLC59116 is an I2C bus controlled 16-channel LED driver.  Each LED
>> > output has its own 8-bit fixed-frequency PWM controller to control the
>> > brightness of the LED.
>> >
>> > This is based on a driver from Belkin, but has been extensively
>> > rewritten.
>> >
>> > Signed-off-by: Andrew Lunn <andrew@lunn.ch>
>> > Cc: Matthew.Fatheree@belkin.com
>>
>> Looks good, applied to my tree.
>
> Great, thanks.
>
> Will you also take the device tree binding document patch?
>
> Thanks
>         Andrew

Can you update that one without that gpio thing in the example? And if
there is no objection from others, I will take it.

-Bryan

Re: [PATCHv2 2/2] leds: tlc59116: Driver for the TI 16 Channel i2c LED driver

[Andrew Lunn]

> Can you update that one without that gpio thing in the example? And if
> there is no objection from others, I will take it.

Hi Bryan

v2 of the patch has the #gpio-cells removed.

   Andrew