From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Chen Subject: [PATCH 2/2] ARM: imx6sx-sdb: add revb board Date: Wed, 14 Jan 2015 15:36:38 +0800 Message-ID: <1421220998-3491-3-git-send-email-peter.chen@freescale.com> References: <1421220998-3491-1-git-send-email-peter.chen@freescale.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1421220998-3491-1-git-send-email-peter.chen@freescale.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: shawn.guo@linaro.org, kernel@pengutronix.de, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com Cc: devicetree@vger.kernel.org, Peter Chen , linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Add imx6sx-sdb revb board Signed-off-by: Peter Chen --- arch/arm/boot/dts/imx6sx-sdb-revb.dts | 145 ++++++++++++++++++++++++++++++++++ 1 file changed, 145 insertions(+) create mode 100644 arch/arm/boot/dts/imx6sx-sdb-revb.dts diff --git a/arch/arm/boot/dts/imx6sx-sdb-revb.dts b/arch/arm/boot/dts/imx6sx-sdb-revb.dts new file mode 100644 index 0000000..d68dfd4 --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-sdb-revb.dts @@ -0,0 +1,145 @@ +/* + * Copyright (C) 2014-2015 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "imx6sx-sdb.dtsi" + +/ { + model = "Freescale i.MX6 SoloX SDB RevB Board"; +}; + +&cpu0 { + operating-points = < + /* kHz uV */ + 996000 1250000 + 792000 1175000 + 396000 1175000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC uV */ + 996000 1250000 + 792000 1175000 + 396000 1175000 + >; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze200"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&qspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi2>; + status = "okay"; + + flash0: n25q256a@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q256a"; + spi-max-frequency = <29000000>; + reg = <0>; + }; + + flash1: n25q256a@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q256a"; + spi-max-frequency = <29000000>; + reg = <1>; + }; +}; -- 1.9.1