From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gabriel FERNANDEZ Subject: [PATCH 0/3] Enable myphy28lp support Date: Wed, 14 Jan 2015 10:54:56 +0100 Message-ID: <1421229299-8206-1-git-send-email-gabriel.fernandez@linaro.org> Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Srinivas Kandagatla , Maxime Coquelin , Patrice Chotard , Russell King , Kishon Vijay Abraham I , Grant Likely Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, kernel-F5mvAk5X5gdBDgjK7y7TUQ@public.gmane.org, Lee Jones , Gabriel Fernandez List-Id: devicetree@vger.kernel.org The goal of this series is to enable the support of MiPHY28lp Generic PHY. The first patch is to update miphy28lp phy driver to access sysconfig register offsets via syscfg dt property. It's based on Arnds review comments here https://lkml.org/lkml/2014/11/13/161 I have updated the miphy28lp phy driver same way as Peter's implementation. Gabriel Fernandez (3): phy: miphy28lp: Pass sysconfig register offsets via syscfg dt property. ARM: DT: STi: STiH407: Add DT node for MiPHY28lp ARM: multi_v7_defconfig: Enable MiPHY28lp - ST's Generic (SATA, PCIe & USB3) PHY .../devicetree/bindings/phy/phy-miphy28lp.txt | 43 ++++++--------- arch/arm/boot/dts/stih407-family.dtsi | 53 +++++++++++++++++++ arch/arm/boot/dts/stihxxx-b2120.dtsi | 11 ++++ arch/arm/configs/multi_v7_defconfig | 1 + drivers/phy/phy-miphy28lp.c | 61 ++++++++++++---------- 5 files changed, 113 insertions(+), 56 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html