devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Gabriel FERNANDEZ <gabriel.fernandez@st.com>
To: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Srinivas Kandagatla <srinivas.kandagatla@gmail.com>,
	Maxime Coquelin <maxime.coquelin@st.com>,
	Patrice Chotard <patrice.chotard@st.com>,
	Russell King <linux@arm.linux.org.uk>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Grant Likely <grant.likely@linaro.org>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, kernel@stlinux.com,
	Lee Jones <lee.jones@linaro.org>,
	Gabriel Fernandez <gabriel.fernandez@linaro.org>
Subject: [PATCH 2/3] ARM: DT: STi: STiH407: Add DT node for MiPHY28lp
Date: Wed, 14 Jan 2015 10:54:58 +0100	[thread overview]
Message-ID: <1421229299-8206-3-git-send-email-gabriel.fernandez@linaro.org> (raw)
In-Reply-To: <1421229299-8206-1-git-send-email-gabriel.fernandez@linaro.org>

The MiPHY28lp is a Generic PHY which can serve various SATA, PCIe or
USB3 devices. The two first ports can be use for either; both SATA, both
PCIe or one of each in any configuration.
The Third port is only for USB3.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
---
 arch/arm/boot/dts/stih407-family.dtsi | 53 +++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/stihxxx-b2120.dtsi  | 11 ++++++++
 2 files changed, 64 insertions(+)

diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index d4a8f84..c06a546 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -283,5 +283,58 @@
 				 <&picophyreset STIH407_PICOPHY0_RESET>;
 			reset-names = "global", "port";
 		};
+
+		miphy28lp_phy: miphy28lp@9b22000 {
+			compatible = "st,miphy28lp-phy";
+			st,syscfg = <&syscfg_core>;
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			ranges;
+
+			phy_port0: port@9b22000 {
+				reg = <0x9b22000 0xff>,
+				      <0x9b09000 0xff>,
+				      <0x9b04000 0xff>;
+				reg-names = "sata-up",
+					    "pcie-up",
+					    "pipew";
+
+				st,syscfg = <0x114 0x818 0xe0 0xec>;
+				#phy-cells = <1>;
+
+				reset-names = "miphy-sw-rst";
+				resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
+			};
+
+			phy_port1: port@9b2a000 {
+				reg = <0x9b2a000 0xff>,
+				      <0x9b19000 0xff>,
+				      <0x9b14000 0xff>;
+				reg-names = "sata-up",
+					    "pcie-up",
+					    "pipew";
+
+				st,syscfg = <0x118 0x81c 0xe4 0xf0>;
+
+				#phy-cells = <1>;
+
+				reset-names = "miphy-sw-rst";
+				resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
+			};
+
+			phy_port2: port@8f95000 {
+				reg = <0x8f95000 0xff>,
+				      <0x8f90000 0xff>;
+				reg-names = "pipew",
+					    "usb3-up";
+
+				st,syscfg = <0x11c 0x820>;
+
+				#phy-cells = <1>;
+
+				reset-names = "miphy-sw-rst";
+				resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 0074bd4..8af5282 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -55,5 +55,16 @@
 			st,i2c-min-scl-pulse-width-us = <0>;
 			st,i2c-min-sda-pulse-width-us = <5>;
 		};
+
+		miphy28lp_phy: miphy28lp@9b22000 {
+
+			phy_port0: port@9b22000 {
+				st,osc-rdy;
+			};
+
+			phy_port1: port@9b2a000 {
+				st,osc-force-ext;
+			};
+		};
 	};
 };
-- 
1.9.1

  parent reply	other threads:[~2015-01-14  9:54 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-14  9:54 [PATCH 0/3] Enable myphy28lp support Gabriel FERNANDEZ
2015-01-14  9:54 ` [PATCH 1/3] phy: miphy28lp: Pass sysconfig register offsets via syscfg dt property Gabriel FERNANDEZ
2015-01-14  9:54 ` Gabriel FERNANDEZ [this message]
2015-01-14  9:54 ` [PATCH 3/3] ARM: multi_v7_defconfig: Enable MiPHY28lp - ST's Generic (SATA, PCIe & USB3) PHY Gabriel FERNANDEZ
     [not found] ` <1421229299-8206-1-git-send-email-gabriel.fernandez-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-01-16 11:56   ` [PATCH 0/3] Enable myphy28lp support Maxime Coquelin
     [not found]     ` <54B8FC56.8080400-qxv4g6HH51o@public.gmane.org>
2015-01-16 12:32       ` Maxime Coquelin
     [not found]         ` <54B904C3.1080002-qxv4g6HH51o@public.gmane.org>
2015-01-16 13:19           ` Kishon Vijay Abraham I
     [not found]             ` <54B90FC4.2020604-l0cyMroinI0@public.gmane.org>
2015-01-16 15:04               ` Maxime Coquelin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1421229299-8206-3-git-send-email-gabriel.fernandez@linaro.org \
    --to=gabriel.fernandez@st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gabriel.fernandez@linaro.org \
    --cc=galak@codeaurora.org \
    --cc=grant.likely@linaro.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=kernel@stlinux.com \
    --cc=kishon@ti.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=maxime.coquelin@st.com \
    --cc=patrice.chotard@st.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=srinivas.kandagatla@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).