From: Gabriel FERNANDEZ <gabriel.fernandez@st.com>
To: Srinivas Kandagatla <srinivas.kandagatla@gmail.com>,
Maxime Coquelin <maxime.coquelin@st.com>,
Patrice Chotard <patrice.chotard@st.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Russell King <linux@arm.linux.org.uk>,
benjamin.gaignard@linaro.org
Cc: linux-arm-kernel@lists.infradead.org, kernel@stlinux.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Lee Jones <lee.jones@linaro.org>,
Gabriel Fernandez <gabriel.fernandez@linaro.org>
Subject: [PATCH 1/2] ARM: DT: STiH407: Add DRM dt nodes
Date: Wed, 14 Jan 2015 16:47:11 +0100 [thread overview]
Message-ID: <1421250432-25903-2-git-send-email-gabriel.fernandez@linaro.org> (raw)
In-Reply-To: <1421250432-25903-1-git-send-email-gabriel.fernandez@linaro.org>
This patch adds the DRM/KMS dt nodes.
This node can't be in stih407-family.dtsi file because in the future we
will integrate a new stih418-b2199 board. It's a stih407 family board
with different drm/kms dt nodes.
That is why i created the stih407.dtsi file.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
---
arch/arm/boot/dts/stih407-b2120.dts | 3 +-
arch/arm/boot/dts/stih407.dtsi | 151 +++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/stihxxx-b2120.dtsi | 2 +-
3 files changed, 153 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/boot/dts/stih407.dtsi
diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts
index 261d5e2..af48714 100644
--- a/arch/arm/boot/dts/stih407-b2120.dts
+++ b/arch/arm/boot/dts/stih407-b2120.dts
@@ -7,9 +7,8 @@
* published by the Free Software Foundation.
*/
/dts-v1/;
-#include "stih407-clock.dtsi"
-#include "stih407-family.dtsi"
#include "stihxxx-b2120.dtsi"
+#include "stih407.dtsi"
/ {
model = "STiH407 B2120";
compatible = "st,stih407-b2120", "st,stih407";
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
new file mode 100644
index 0000000..3efa3b2
--- /dev/null
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2015 STMicroelectronics Limited.
+ * Author: Gabriel Fernandez <gabriel.fernandez@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih407-clock.dtsi"
+#include "stih407-family.dtsi"
+/ {
+ soc {
+ /* Display */
+ vtg_main: sti-vtg-main@8d02800 {
+ compatible = "st,vtg";
+ reg = <0x8d02800 0x200>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
+ };
+
+ vtg_aux: sti-vtg-aux@8d00200 {
+ compatible = "st,vtg";
+ reg = <0x8d00200 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
+ };
+
+ sti-display-subsystem {
+ compatible = "st,sti-display-subsystem";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ assigned-clocks = <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
+ <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP1>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP2>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP3>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP4>;
+
+ assigned-clock-parents = <0>,
+ <0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>;
+
+ assigned-clock-rates = <297000000>, <297000000>;
+
+ ranges;
+
+ sti-compositor@9d11000 {
+ compatible = "st,stih407-compositor";
+ reg = <0x9d11000 0x1000>;
+
+ clock-names = "compo_main",
+ "compo_aux",
+ "pix_main",
+ "pix_aux",
+ "pix_gdp1",
+ "pix_gdp2",
+ "pix_gdp3",
+ "pix_gdp4",
+ "main_parent",
+ "aux_parent";
+
+ clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+ <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+ <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
+ <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP1>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP2>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP3>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP4>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>;
+
+ reset-names = "compo-main", "compo-aux";
+ resets = <&softreset STIH407_COMPO_SOFTRESET>,
+ <&softreset STIH407_COMPO_SOFTRESET>;
+ st,vtg = <&vtg_main>, <&vtg_aux>;
+ };
+
+ sti-tvout@8d08000 {
+ compatible = "st,stih407-tvout";
+ reg = <0x8d08000 0x1000>;
+ reg-names = "tvout-reg";
+ reset-names = "tvout";
+ resets = <&softreset STIH407_HDTVOUT_SOFTRESET>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+ <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+ <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+ <&clk_s_d0_flexgen CLK_PCM_0>,
+ <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+ <&clk_s_d2_flexgen CLK_HDDAC>;
+
+ assigned-clock-parents = <&clk_s_d2_quadfs 0>,
+ <&clk_tmdsout_hdmi>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d0_quadfs 0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>;
+ ranges;
+
+ sti-hdmi@8d04000 {
+ compatible = "st,stih407-hdmi";
+ reg = <0x8d04000 0x1000>;
+ reg-names = "hdmi-reg";
+ interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
+ interrupt-names = "irq";
+ clock-names = "pix",
+ "tmds",
+ "phy",
+ "audio",
+ "main_parent",
+ "aux_parent";
+
+ clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+ <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+ <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+ <&clk_s_d0_flexgen CLK_PCM_0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>;
+
+ hdmi,hpd-gpio = <&pio5 3>;
+ reset-names = "hdmi";
+ resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
+ ddc = <&hdmiddc>;
+
+ };
+
+ sti-hda@8d02000 {
+ compatible = "st,stih407-hda";
+ reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
+ reg-names = "hda-reg", "video-dacs-ctrl";
+ clock-names = "pix",
+ "hddac",
+ "main_parent",
+ "aux_parent";
+ clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+ <&clk_s_d2_flexgen CLK_HDDAC>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 8af5282..c1d8590 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -48,7 +48,7 @@
};
/* SSC11 to HDMI */
- i2c@9541000 {
+ hdmiddc: i2c@9541000 {
status = "okay";
/* HDMI V1.3a supports Standard mode only */
clock-frequency = <100000>;
--
1.9.1
next prev parent reply other threads:[~2015-01-14 15:47 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-14 15:47 [PATCH 0/2] Enable DRM/KMS support for STiH407 and STiH410 boards Gabriel FERNANDEZ
2015-01-14 15:47 ` Gabriel FERNANDEZ [this message]
2015-01-14 15:47 ` [PATCH 2/2] ARM: DT: STiH410: Add DRM dt nodes Gabriel FERNANDEZ
2015-01-16 10:52 ` [STLinux Kernel] [PATCH 0/2] Enable DRM/KMS support for STiH407 and STiH410 boards Peter Griffin
2015-03-03 10:10 ` Maxime Coquelin
-- strict thread matches above, loose matches on Subject: below --
2014-12-17 10:02 [PATCH 0/2] Enable DRM/KMS support for STiH407 Family boards Gabriel FERNANDEZ
[not found] ` <1418810544-11405-1-git-send-email-gabriel.fernandez-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-12-17 10:02 ` [PATCH 1/2] ARM: DT: STiH407: Add DRM dt nodes Gabriel FERNANDEZ
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421250432-25903-2-git-send-email-gabriel.fernandez@linaro.org \
--to=gabriel.fernandez@st.com \
--cc=benjamin.gaignard@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=gabriel.fernandez@linaro.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=kernel@stlinux.com \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=maxime.coquelin@st.com \
--cc=patrice.chotard@st.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=srinivas.kandagatla@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).