From mboxrd@z Thu Jan 1 00:00:00 1970 From: Romain Perier Subject: [PATCH v2 1/4] net: stmmac: dwmac-rk: Don't set the regulator voltage for phy from the driver Date: Tue, 20 Jan 2015 07:09:37 +0000 Message-ID: <1421737780-1533-2-git-send-email-romain.perier@gmail.com> References: <1421737780-1533-1-git-send-email-romain.perier@gmail.com> Return-path: In-Reply-To: <1421737780-1533-1-git-send-email-romain.perier-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: peppe.cavallaro-qxv4g6HH51o@public.gmane.org Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, roger.chen-TNX95d0MmH7DzftRWevZcw@public.gmane.org List-Id: devicetree@vger.kernel.org As these settings can be directly expressed from devicetree for both fixed regulators and pmic-integrated regulators, it is more standard to set them from dts and let the regulator framework use the right voltage informations when it is used in the driver. Signed-off-by: Romain Perier --- drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c index 35f9b86..06e1637 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c @@ -303,7 +303,6 @@ static int phy_power_on(struct rk_priv_data *bsp_priv, bool enable) } else { if (enable) { if (!regulator_is_enabled(ldo)) { - regulator_set_voltage(ldo, 3300000, 3300000); ret = regulator_enable(ldo); if (ret != 0) dev_err(dev, "%s: fail to enable %s\n", -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html