[PATCH 2/2] sunxi: clk: Set sun6i-pll1 n_start = 1

[Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>]

For all pll-s on sun6i n == 0 means use a multiplier of 1, rather then 0 as
it means on sun4i / sun5i / sun7i. n_start = 1 is already correctly set
for sun6i pll6, but was missing for pll1, this commit fixes this.

Cc: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 drivers/clk/sunxi/clk-sunxi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 24c7cc1..699458e 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -584,6 +584,7 @@ static struct clk_factors_config sun6i_a31_pll1_config = {
 	.kwidth = 2,
 	.mshift = 0,
 	.mwidth = 2,
+	.n_start = 1,
 };
 
 static struct clk_factors_config sun8i_a23_pll1_config = {
-- 
2.1.0