devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Markus Pargmann <mpa@pengutronix.de>
To: Shawn Guo <shawn.guo@linaro.org>,
	Samuel Ortiz <sameo@linux.intel.com>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Jonathan Cameron <jic23@kernel.org>,
	Fabio Estevam <festevam@gmail.com>,
	Peter Meerwald <pmeerw@pmeerw.net>,
	Hartmut Knaack <knaack.h@gmx.de>
Cc: "Denis Carikli" <denis@eukrea.com>,
	"Eric Bénard" <eric@eukrea.com>,
	"Sascha Hauer" <kernel@pengutronix.de>,
	linux-arm-kernel@lists.infradead.org,
	"Lee Jones" <lee.jones@linaro.org>,
	linux-input@vger.kernel.org, linux-iio@vger.kernel.org,
	"Lars-Peter Clausen" <lars@metafoo.de>,
	devicetree@vger.kernel.org, "Rob Herring" <robh+dt@kernel.org>,
	"Pawel Moll" <pawel.moll@arm.com>,
	"Mark Rutland" <mark.rutland@arm.com>,
	"Ian Campbell" <ijc+devicetree@hellion.org.uk>,
	"Kumar Gala" <galak@codeaurora.org>,
	"Markus Pargmann" <mpa@pengutronix.de>
Subject: [PATCH v5 0/6] imx25 adc and touchscreen driver
Date: Sat, 24 Jan 2015 15:01:37 +0100	[thread overview]
Message-ID: <1422108103-15052-1-git-send-email-mpa@pengutronix.de> (raw)

Hi,

This series adds a driver for the Freescale i.MX25 SoC internal ADC unit which
is used for touchscreen and ADC. The driver consists of three parts, the MFD
driver which handles interrupts and some central configuration registers, the
ADC driver and the touchscreen driver.

The last couple of versions of this series were pushed by Denis, thanks. Now I
tried to work on the comments of the last version v4 of last year.

v5 has a lot of smaller changes, listed below. I also fixed the touchscreen
driver to reduce the number of interrupts. The drivers first version was
designed to start a new conversion whenever we got a conversion done or a
pendown was detected. This lead to a lot of interrupts. Instead we use the
ability of the hardware unit to repeat a conversion queue automatically with a
repeat wait timer. This is done in hardware and configured only once in
software to a constant value.

Best regards,

Markus


Changes in v5:
 - Removed module owner assingments from all drivers
 - Added missing kconfig dependencies
 - Separated DT binding documentation
 - Fixed locking for the gcq driver
 - Fixed a lot of style issues with the newer checkpatch tool, e.g. alignment
   of breaked lines


Denis Carikli (2):
  ARM: dts: imx25: Add TSC and ADC support
  ARM: imx_v4_v5_defconfig: Add I.MX25 Touchscreen controller and ADC
    support.

Markus Pargmann (4):
  mfd: fsl imx25 Touchscreen ADC driver
  ARM: dt: Binding documentation for imx25 ADC/TSC
  iio: adc: fsl,imx25-gcq driver
  input: touchscreen: imx25 tcq driver

 .../devicetree/bindings/iio/adc/fsl,imx25-gcq.txt  |  51 ++
 .../bindings/input/touchscreen/fsl-mx25-tcq.txt    |  29 +
 .../devicetree/bindings/mfd/fsl-imx25-tsadc.txt    |  46 ++
 arch/arm/boot/dts/imx25.dtsi                       |  30 +-
 arch/arm/configs/imx_v4_v5_defconfig               |   4 +
 drivers/iio/adc/Kconfig                            |   7 +
 drivers/iio/adc/Makefile                           |   1 +
 drivers/iio/adc/fsl-imx25-gcq.c                    | 369 +++++++++++++
 drivers/input/touchscreen/Kconfig                  |   6 +
 drivers/input/touchscreen/Makefile                 |   1 +
 drivers/input/touchscreen/fsl-imx25-tcq.c          | 587 +++++++++++++++++++++
 drivers/mfd/Kconfig                                |  10 +
 drivers/mfd/Makefile                               |   2 +
 drivers/mfd/fsl-imx25-tsadc.c                      | 167 ++++++
 include/dt-bindings/iio/adc/fsl-imx25-gcq.h        |  11 +
 include/linux/mfd/imx25-tsadc.h                    | 140 +++++
 16 files changed, 1458 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt
 create mode 100644 drivers/iio/adc/fsl-imx25-gcq.c
 create mode 100644 drivers/input/touchscreen/fsl-imx25-tcq.c
 create mode 100644 drivers/mfd/fsl-imx25-tsadc.c
 create mode 100644 include/dt-bindings/iio/adc/fsl-imx25-gcq.h
 create mode 100644 include/linux/mfd/imx25-tsadc.h

-- 
2.1.4


             reply	other threads:[~2015-01-24 14:01 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-24 14:01 Markus Pargmann [this message]
2015-01-24 14:01 ` [PATCH v5 1/6] mfd: fsl imx25 Touchscreen ADC driver Markus Pargmann
     [not found]   ` <1422108103-15052-2-git-send-email-mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-02-16 13:38     ` Lee Jones
2015-02-17 18:54       ` Fabio Estevam
2015-02-18  8:01         ` Lee Jones
2015-02-18 11:57           ` Fabio Estevam
2015-02-18 12:08             ` Lee Jones
2015-02-26 15:32               ` Markus Pargmann
2015-02-17 19:14     ` Uwe Kleine-König
2015-03-02 19:12       ` Markus Pargmann
2015-01-24 14:01 ` [PATCH v5 2/6] ARM: dt: Binding documentation for imx25 ADC/TSC Markus Pargmann
2015-01-24 14:01 ` [PATCH v5 3/6] iio: adc: fsl,imx25-gcq driver Markus Pargmann
2015-01-27 20:30   ` Jonathan Cameron
     [not found]     ` <54C7F580.1030901-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2015-01-29 10:11       ` Markus Pargmann
     [not found]         ` <20150129101104.GE27422-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-02-08 11:56           ` Jonathan Cameron
     [not found]   ` <1422108103-15052-4-git-send-email-mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-01-29 14:51     ` Fabio Estevam
2015-01-30  7:27       ` Markus Pargmann
2015-01-24 14:01 ` [PATCH v5 4/6] input: touchscreen: imx25 tcq driver Markus Pargmann
     [not found] ` <1422108103-15052-1-git-send-email-mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-01-24 14:01   ` [PATCH v5 5/6] ARM: dts: imx25: Add TSC and ADC support Markus Pargmann
2015-01-24 14:01 ` [PATCH v5 6/6] ARM: imx_v4_v5_defconfig: Add I.MX25 Touchscreen controller " Markus Pargmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1422108103-15052-1-git-send-email-mpa@pengutronix.de \
    --to=mpa@pengutronix.de \
    --cc=denis@eukrea.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=eric@eukrea.com \
    --cc=festevam@gmail.com \
    --cc=galak@codeaurora.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=jic23@kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=pmeerw@pmeerw.net \
    --cc=robh+dt@kernel.org \
    --cc=sameo@linux.intel.com \
    --cc=shawn.guo@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).