From: Roger Quadros <rogerq@ti.com>
To: balbi@ti.com, tony@atomide.com, myungjoo.ham@samsung.com,
cw00.choi@samsung.com
Cc: george.cherian@ti.com, nsekhar@ti.com,
devicetree@vger.kernel.org, linux-usb@vger.kernel.org,
linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
Roger Quadros <rogerq@ti.com>
Subject: [PATCH v2 6/7] ARM: dts: am57xx-beagle-x15: Fix USB2 mode
Date: Mon, 26 Jan 2015 14:15:31 +0200 [thread overview]
Message-ID: <1422274532-9488-7-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1422274532-9488-1-git-send-email-rogerq@ti.com>
On this board USB2 is meant to be used as peripheral only.
The ID pin for USB2 is hardwired HIGH.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/boot/dts/am57xx-beagle-x15.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index ad1833b..2115dda 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -436,3 +436,7 @@
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
+
+&usb2 {
+ dr_mode = "peripheral";
+};
--
2.1.0
next prev parent reply other threads:[~2015-01-26 12:15 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-26 12:15 [PATCH v2 0/7] extcon: usb: Introduce USB GPIO extcon driver. Fix DRA7 & AM57xx USB Roger Quadros
[not found] ` <1422274532-9488-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2015-01-26 12:15 ` [PATCH v2 1/7] extcon: usb-gpio: Introduce gpio usb extcon driver Roger Quadros
[not found] ` <1422274532-9488-2-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2015-01-26 13:56 ` Chanwoo Choi
2015-01-26 16:27 ` Roger Quadros
[not found] ` <54C66B0D.9040109-l0cyMroinI0@public.gmane.org>
2015-01-27 1:54 ` Chanwoo Choi
[not found] ` <54C6EFC8.1090601-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-01-27 15:38 ` Roger Quadros
2015-01-28 2:19 ` Chanwoo Choi
2015-01-28 12:12 ` Roger Quadros
2015-01-28 17:09 ` Tony Lindgren
2015-01-29 11:31 ` Roger Quadros
2015-01-29 16:56 ` Tony Lindgren
[not found] ` <20150129165625.GB16250-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2015-01-30 10:58 ` Roger Quadros
2015-01-28 12:15 ` [PATCH v3 " Roger Quadros
2015-01-29 1:49 ` Chanwoo Choi
2015-01-29 11:26 ` Roger Quadros
2015-01-30 0:06 ` Chanwoo Choi
[not found] ` <54CACAEF.6070208-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-01-30 11:09 ` Roger Quadros
2015-01-30 13:57 ` Roger Quadros
2015-01-30 0:11 ` Chanwoo Choi
2015-01-30 14:03 ` Roger Quadros
[not found] ` <54CB8F3A.7020903-l0cyMroinI0@public.gmane.org>
2015-02-02 5:06 ` Chanwoo Choi
2015-02-02 10:21 ` [PATCH v4 1/1] " Roger Quadros
2015-02-03 1:13 ` Chanwoo Choi
2015-03-16 12:32 ` Ivan T. Ivanov
2015-03-16 13:11 ` Roger Quadros
2015-03-16 14:23 ` Ivan T. Ivanov
2015-03-17 2:01 ` Chanwoo Choi
2015-03-17 7:52 ` Ivan T. Ivanov
[not found] ` <1426578738.2330.18.camel-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-03-17 8:00 ` Ivan T. Ivanov
2015-01-26 12:15 ` [PATCH v2 2/7] usb: extcon: Fix USB-Host cable name Roger Quadros
2015-01-30 11:04 ` Roger Quadros
2015-01-30 14:05 ` Roger Quadros
2015-02-02 5:04 ` Chanwoo Choi
2015-02-02 9:09 ` Roger Quadros
2015-02-02 9:55 ` Chanwoo Choi
[not found] ` <54CF4974.7080404-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-02-02 10:01 ` Roger Quadros
[not found] ` <54CF4B14.4050802-l0cyMroinI0@public.gmane.org>
2015-02-02 10:06 ` Chanwoo Choi
2015-01-26 12:15 ` [PATCH v2 3/7] ARM: dts: dra7-evm: Add extcon nodes for USB Roger Quadros
2015-01-26 12:15 ` [PATCH v2 4/7] ARM: dts: dra72-evm: " Roger Quadros
2015-01-26 12:15 ` [PATCH v2 5/7] ARM: dts: am57xx-beagle-x15: " Roger Quadros
2015-01-26 12:15 ` Roger Quadros [this message]
2015-01-26 12:15 ` [PATCH v2 7/7] ARM: omap2plus_defconfig: Enable EXTCON_GPIO_USB Roger Quadros
[not found] ` <1422274532-9488-8-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2015-03-16 17:53 ` Tony Lindgren
[not found] ` <20150316175355.GS5264-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2015-03-17 9:29 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422274532-9488-7-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=balbi@ti.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=george.cherian@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=nsekhar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).