From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: Kukjin Kim <kgene@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
Marek Szyprowski <m.szyprowski@samsung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Subject: Re: [PATCH] ARM: dts: exynos5420: Add maudio power domain
Date: Mon, 09 Feb 2015 14:17:17 +0100 [thread overview]
Message-ID: <1423487837.23462.2.camel@AMDC1943> (raw)
In-Reply-To: <54D8AEE5.1090308@collabora.co.uk>
On pon, 2015-02-09 at 13:58 +0100, Javier Martinez Canillas wrote:
> Hello Krzysztof,
>
> On 02/09/2015 01:41 PM, Krzysztof Kozlowski wrote:
> > Add maudio power domain to Exynos 5420 DTSI file so its state could be
> > tracked. This actually won't power down this domain because the pl330
> > dmaengine driver (for adma channel) uses IRQ safe runtime PM. Thus the
> > patch should not introduce any functional change except of visibility of
> > this domain to the system.
> >
> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > ---
>
> Your patch looks good to me, I just have two small comments below. With
> those changes, feel free to add:
>
> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Thanks!
>
> > arch/arm/boot/dts/exynos5420.dtsi | 7 +++++++
> > 1 file changed, 7 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
> > index 6d38f8bfd0e6..2e99a39f7250 100644
> > --- a/arch/arm/boot/dts/exynos5420.dtsi
> > +++ b/arch/arm/boot/dts/exynos5420.dtsi
> > @@ -270,6 +270,11 @@
> > reg = <0x10044120 0x20>;
> > };
> >
> > + mau_pd: power-domain@100440E0 {
> > + compatible = "samsung,exynos4210-pd";
> > + reg = <0x100440E0 0x20>;
>
> You also need to add #power-domain-cells = <0> here since "power-domain-cells"
> is a required property now that the Exynos PD code has been converted to use
> the generic power domains lookup.
Okay
>
> > + };
> > +
> > pinctrl_0: pinctrl@13400000 {
> > compatible = "samsung,exynos5420-pinctrl";
> > reg = <0x13400000 0x1000>;
> > @@ -328,6 +333,7 @@
> > #dma-cells = <1>;
> > #dma-channels = <6>;
> > #dma-requests = <16>;
> > + samsung,power-domain = <&mau_pd>;
>
> Same here. Even though "samsung,power-domain" is kept as backward compatible,
> "power-domains" should be used instead. In fact Marek sent a patch [0] to get
> rid of all the current "samsung,power-domain" properties so it would be good
> if you can base on top of that one.
Right, I rebased this on mid-January next which did not include Marek's
work yet.
Best regards,
Krzysztof
>
> Best regards,
> Javier
>
> [0]: http://www.spinics.net/lists/linux-samsung-soc/msg40584.html
prev parent reply other threads:[~2015-02-09 13:17 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-09 12:41 [PATCH] ARM: dts: exynos5420: Add maudio power domain Krzysztof Kozlowski
2015-02-09 12:58 ` Javier Martinez Canillas
2015-02-09 13:17 ` Krzysztof Kozlowski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1423487837.23462.2.camel@AMDC1943 \
--to=k.kozlowski@samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=javier.martinez@collabora.co.uk \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).