From: Rostislav Lisovy <lisovy@gmail.com>
To: linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
Benoit Cousson <bcousson@baylibre.com>,
Tony Lindgren <tony@atomide.com>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Rostislav Lisovy <lisovy@jablotron.cz>
Subject: [PATCH 3/3] ARM: dts: am335x: Add Chiliboard DTS
Date: Mon, 9 Feb 2015 15:48:05 +0100 [thread overview]
Message-ID: <1423493285-4231-3-git-send-email-lisovy@jablotron.cz> (raw)
In-Reply-To: <1423493285-4231-1-git-send-email-lisovy@jablotron.cz>
Chiliboard uses ChiliSOM as its base.
Hardware specification:
* ChiliSOM (am335x, PMIC, DRAM, NAND)
* Ethernet PHY (id 0)
* USB host (usb1)
* microSD slot
* 2x GPIO LED
Signed-off-by: Rostislav Lisovy <lisovy@jablotron.cz>
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/am335x-chiliboard.dts | 112 ++++++++++++++++++++++++++++++++
2 files changed, 114 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/am335x-chiliboard.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a1c776b..b316b38 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -401,7 +401,8 @@ dtb-$(CONFIG_SOC_AM33XX) += \
am335x-evmsk.dtb \
am335x-nano.dtb \
am335x-pepper.dtb \
- am335x-lxm.dtb
+ am335x-lxm.dtb \
+ am335x-chiliboard.dtb
dtb-$(CONFIG_ARCH_OMAP4) += \
omap4-duovero-parlor.dtb \
omap4-panda.dtb \
diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
new file mode 100644
index 0000000..2cf8ee2
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-chiliboard.dts
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/
+ * Author: Rostislav Lisovy <lisovy@jablotron.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "am335x-chilisom.dtsi"
+
+/ {
+ model = "AM335x Chiliboard";
+ compatible = "grinn,am335x-chiliboard", "grinn,am335x-chilisom",
+ "ti,am33xx";
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_gpio_pins>;
+
+ led0 {
+ label = "led0";
+ gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ };
+};
+
+&am33xx_pinmux {
+ usb1_drvvbus: usb1_drvvbus {
+ pinctrl-single,pins = <
+ 0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
+ >;
+ };
+
+ sd_pins: pinmux_sd_card {
+ pinctrl-single,pins = <
+ 0xf0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ 0xf4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ 0xf8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ 0xfc (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
+
+ led_gpio_pins: led_gpio_pins {
+ pinctrl-single,pins = <
+ 0x1e4 (PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */
+ 0x1e8 (PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */
+ >;
+ };
+};
+
+&ldo4_reg {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+};
+
+/* Ethernet */
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "rmii";
+};
+
+&phy_sel {
+ rmii-clock-ext;
+};
+
+/* USB */
+&usb {
+ status = "okay";
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_drvvbus>;
+
+ status = "okay";
+ dr_mode = "host";
+};
+
+&cppi41dma {
+ status = "okay";
+};
+
+/* microSD */
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_pins>;
+ vmmc-supply = <&ldo4_reg>;
+ bus-width = <0x4>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
--
2.1.0
prev parent reply other threads:[~2015-02-09 14:48 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-09 14:48 [PATCH 1/3] ARM: dts: Add vendor prefix for Grinn Rostislav Lisovy
2015-02-09 14:48 ` [PATCH 2/3] ARM: dts: am335x: Add DTS for ChiliSOM module Rostislav Lisovy
[not found] ` <1423493285-4231-2-git-send-email-lisovy-/jIuvo6cn7g68gdbZb/DoA@public.gmane.org>
2015-03-16 20:50 ` Tony Lindgren
2015-02-09 14:48 ` Rostislav Lisovy [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1423493285-4231-3-git-send-email-lisovy@jablotron.cz \
--to=lisovy@gmail.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=lisovy@jablotron.cz \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).