[PATCH 3/5] ARM: dts: zynq: Add LED for Parallella

["Andreas Färber" <afaerber@suse.de>]

This is the green LED CR10.

Signed-off-by: Andreas Färber <afaerber@suse.de>
---
 arch/arm/boot/dts/zynq-parallella1.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/zynq-parallella1.dtsi b/arch/arm/boot/dts/zynq-parallella1.dtsi
index e77a4968fe17..8b2895c06c8e 100644
--- a/arch/arm/boot/dts/zynq-parallella1.dtsi
+++ b/arch/arm/boot/dts/zynq-parallella1.dtsi
@@ -18,6 +18,7 @@
  * GNU General Public License for more details.
  */
 /include/ "zynq-7000.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	compatible = "adapteva,parallella", "xlnx,zynq-7000";
@@ -36,6 +37,16 @@
 		bootargs = "console=ttyPS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
 		linux,stdout-path = "/amba/serial@e0001000";
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		cr10 {
+			label = "parallella:cr10:usr";
+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
 };
 
 &clkc {
-- 
2.2.2