From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mathieu Olivari Subject: [PATCH 0/3] arm: msm: Use timer DT node for qcom watchdog config Date: Fri, 20 Feb 2015 18:19:33 -0800 Message-ID: <1424485176-8348-1-git-send-email-mathieu@codeaurora.org> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, linux@arm.linux.org.uk, wim@iguana.be, corbet@lwn.net, standby24x7@gmail.com, mathieu@codeaurora.org Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-watchdog@vger.kernel.org List-Id: devicetree@vger.kernel.org This change is done as a follow-up to the following thread: https://lkml.org/lkml/2014/10/1/436 qcom-wdt is currently assuming the presence of a dedicated node in DT to gets its configuration. However, on msm architecture, the watchdog is usually part of the timer block. So this patch-set is changing the driver and slightly enhancing the timer DT bindings to provide the relevant clocks and interrupts. Mathieu Olivari (3): watchdog: qcom: use timer devicetree binding ARM: qcom: add description of KPSS WDT for IPQ8064 ARM: msm: add watchdog entries to DT timer binding doc Documentation/devicetree/bindings/arm/msm/timer.txt | 16 +++++++++++++--- arch/arm/boot/dts/qcom-ipq8064.dtsi | 14 +++++++++++++- drivers/watchdog/qcom-wdt.c | 21 +++++++++++++++------ 3 files changed, 41 insertions(+), 10 deletions(-) -- 1.9.1