From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Griffin Subject: [PATCH 2/6] ahci: st: Update the DT example for how to obtain the PHY. Date: Wed, 25 Feb 2015 13:36:13 +0000 Message-ID: <1424871377-1795-3-git-send-email-peter.griffin@linaro.org> References: <1424871377-1795-1-git-send-email-peter.griffin@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1424871377-1795-1-git-send-email-peter.griffin@linaro.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, srinivas.kandagatla@gmail.com, maxime.coquelin@st.com, patrice.chotard@st.com, kishon@ti.com, balbi@ti.com Cc: peter.griffin@linaro.org, devicetree@vger.kernel.org, lee.jones@linaro.org List-Id: devicetree@vger.kernel.org The example is wrong in that the phys property should take a phandle to the phy port. Also with the changing over to generic PHY type constants we also update this as well. Signed-off-by: Peter Griffin --- Documentation/devicetree/bindings/ata/ahci-st.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/ata/ahci-st.txt b/Documentation/devicetree/bindings/ata/ahci-st.txt index 0574a77..1331202 100644 --- a/Documentation/devicetree/bindings/ata/ahci-st.txt +++ b/Documentation/devicetree/bindings/ata/ahci-st.txt @@ -11,7 +11,7 @@ Required properties: - reset-names : Associated names must be; "pwr-dwn" and "sw-rst" - clocks : The phandle for the clock - clock-names : Associated name must be; "ahci_clk" - - phys : The phandle for the PHY device + - phys : The phandle for the PHY port - phy-names : Associated name must be; "ahci_phy" Example: @@ -21,7 +21,7 @@ Example: reg = <0xfe380000 0x1000>; interrupts = ; interrupt-names = "hostc"; - phys = <&miphy365x_phy MIPHY_PORT_0 MIPHY_TYPE_SATA>; + phys = <&phy_port0 PHY_TYPE_SATA>; phy-names = "ahci_phy"; resets = <&powerdown STIH416_SATA0_POWERDOWN>, <&softreset STIH416_SATA0_SOFTRESET>; -- 1.9.1