From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Griffin Subject: [PATCH 5/6] usb: dwc3: dwc3-st: Update the DT example. Date: Wed, 25 Feb 2015 13:36:16 +0000 Message-ID: <1424871377-1795-6-git-send-email-peter.griffin@linaro.org> References: <1424871377-1795-1-git-send-email-peter.griffin@linaro.org> Return-path: In-Reply-To: <1424871377-1795-1-git-send-email-peter.griffin@linaro.org> Sender: linux-kernel-owner@vger.kernel.org To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, srinivas.kandagatla@gmail.com, maxime.coquelin@st.com, patrice.chotard@st.com, kishon@ti.com, balbi@ti.com Cc: peter.griffin@linaro.org, lee.jones@linaro.org, devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org There is a subtle type phys-names should be phy-names. Using the current example means you don't have working usb. Also update the example to use the generic phy type constants which are now used for miphy28. Signed-off-by: Peter Griffin --- Documentation/devicetree/bindings/usb/dwc3-st.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt index f9d7025..6634064 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-st.txt +++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt @@ -62,7 +62,7 @@ st_dwc3: dwc3@8f94000 { reg = <0x09900000 0x100000>; interrupts = ; dr_mode = "host"; - phys-names = "usb2-phy", "usb3-phy"; - phys = <&usb2_picophy2>, <&phy_port2 MIPHY_TYPE_USB>; + phy-names = "usb2-phy", "usb3-phy"; + phys = <&usb2_picophy2>, <&phy_port2 PHY_TYPE_USB3>; }; }; -- 1.9.1