From: Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Sebastian Hesselbarth
<sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>,
Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>,
Gregory Clement
<gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Gabriel Dobato <dobatog-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>,
Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v2 1/4] i2c: mux-pinctrl: Rework to honor disabled child nodes
Date: Fri, 27 Feb 2015 13:24:42 +0100 [thread overview]
Message-ID: <1425039885-5137-2-git-send-email-sebastian.hesselbarth@gmail.com> (raw)
In-Reply-To: <1425039885-5137-1-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
I2C mux pinctrl driver currently determines the number of sub-busses by
counting available pinctrl-names. Unfortunately, this requires each
incarnation of the devicetree node with different available sub-busses
to be rewritten.
This patch reworks i2c-mux-pinctrl driver to count the number of
available sub-nodes instead. The rework should be compatible to the old
way of probing for sub-busses and additionally allows to disable unused
sub-busses with standard DT property status = "disabled".
This also amends the corresponding devicetree binding documentation to
reflect the new functionality to disable unused sub-nodes. While at it,
also fix two references to binding documentation files that miss an "i2c-"
prefix.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Tested-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
Cc: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>
Cc: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Cc: Gregory Clement <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: Gabriel Dobato <dobatog-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
.../devicetree/bindings/i2c/i2c-mux-pinctrl.txt | 25 ++++----
drivers/i2c/muxes/i2c-mux-pinctrl.c | 70 ++++++++++++++--------
2 files changed, 59 insertions(+), 36 deletions(-)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
index ae8af1694e95..40cf6d86f935 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
@@ -28,21 +28,21 @@ Also required are:
* Standard pinctrl properties that specify the pin mux state for each child
bus. See ../pinctrl/pinctrl-bindings.txt.
-* Standard I2C mux properties. See mux.txt in this directory.
+* Standard I2C mux properties. See i2c-mux.txt in this directory.
-* I2C child bus nodes. See mux.txt in this directory.
+* I2C child bus nodes. See i2c-mux.txt in this directory.
-For each named state defined in the pinctrl-names property, an I2C child bus
-will be created. I2C child bus numbers are assigned based on the index into
-the pinctrl-names property.
+For each enabled child node an I2C child bus will be created. I2C child bus
+numbers are assigned based on the order of child nodes.
-The only exception is that no bus will be created for a state named "idle". If
-such a state is defined, it must be the last entry in pinctrl-names. For
-example:
+There must be a corresponding pinctrl-names entry for each enabled child
+node at the position of the child node's "reg" property. Also, there can be
+an idle pinctrl state defined at the end of possible pinctrl states. If such
+a state is defined, it must be the last entry in pinctrl-names. For example:
- pinctrl-names = "ddc", "pta", "idle" -> ddc = bus 0, pta = bus 1
- pinctrl-names = "ddc", "idle", "pta" -> Invalid ("idle" not last)
- pinctrl-names = "idle", "ddc", "pta" -> Invalid ("idle" not last)
+ pinctrl-names = "ddc", "pta", "idle" -> ddc = bus 0, pta = bus 1
+ pinctrl-names = "ddc", "idle", "pta" -> Invalid ("idle" not last)
+ pinctrl-names = "idle", "ddc", "pta" -> Invalid ("idle" not last)
Whenever an access is made to a device on a child bus, the relevant pinctrl
state will be programmed into hardware.
@@ -68,6 +68,7 @@ Example:
pinctrl-1 = <&state_i2cmux_pta>;
pinctrl-2 = <&state_i2cmux_idle>;
+ /* Enabled child bus 0 */
i2c@0 {
reg = <0>;
#address-cells = <1>;
@@ -79,10 +80,12 @@ Example:
};
};
+ /* Disabled child bus 1 */
i2c@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
eeprom {
compatible = "eeprom";
diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c
index b48378c4b40d..033dacfabfdf 100644
--- a/drivers/i2c/muxes/i2c-mux-pinctrl.c
+++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c
@@ -56,9 +56,12 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
- int num_names, i, ret;
+ struct device_node *child;
+ struct property *prop;
+ int num_names, num_children, ret;
struct device_node *adapter_np;
struct i2c_adapter *adapter;
+ const char *state;
if (!np)
return 0;
@@ -77,32 +80,16 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
return num_names;
}
- mux->pdata->pinctrl_states = devm_kzalloc(&pdev->dev,
- sizeof(*mux->pdata->pinctrl_states) * num_names,
- GFP_KERNEL);
- if (!mux->pdata->pinctrl_states) {
- dev_err(mux->dev, "Cannot allocate pinctrl_states\n");
- return -ENOMEM;
+ num_children = of_get_available_child_count(np);
+ if (num_children < 0) {
+ dev_err(mux->dev, "Unable to count available children: %d\n",
+ num_children);
+ return num_children;
}
- for (i = 0; i < num_names; i++) {
- ret = of_property_read_string_index(np, "pinctrl-names", i,
- &mux->pdata->pinctrl_states[mux->pdata->bus_count]);
- if (ret < 0) {
- dev_err(mux->dev, "Cannot parse pinctrl-names: %d\n",
- ret);
- return ret;
- }
- if (!strcmp(mux->pdata->pinctrl_states[mux->pdata->bus_count],
- "idle")) {
- if (i != num_names - 1) {
- dev_err(mux->dev, "idle state must be last\n");
- return -EINVAL;
- }
- mux->pdata->pinctrl_state_idle = "idle";
- } else {
- mux->pdata->bus_count++;
- }
+ if (num_names < num_children) {
+ dev_err(mux->dev, "Found less pinctrl states than children\n");
+ return -EINVAL;
}
adapter_np = of_parse_phandle(np, "i2c-parent", 0);
@@ -118,6 +105,39 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
mux->pdata->parent_bus_num = i2c_adapter_id(adapter);
put_device(&adapter->dev);
+ mux->pdata->pinctrl_states = devm_kzalloc(&pdev->dev,
+ sizeof(*mux->pdata->pinctrl_states) * num_children,
+ GFP_KERNEL);
+ if (!mux->pdata->pinctrl_states) {
+ dev_err(mux->dev, "Cannot allocate pinctrl_states\n");
+ return -ENOMEM;
+ }
+
+ of_property_for_each_string(np, "pinctrl-names", prop, state)
+ if (!strcmp(state, "idle"))
+ mux->pdata->pinctrl_state_idle = "idle";
+
+ for_each_available_child_of_node(np, child) {
+ u32 reg;
+
+ ret = of_property_read_u32(child, "reg", ®);
+ if (ret < 0) {
+ dev_err(mux->dev, "Missing reg property for child node: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = of_property_read_string_index(np,
+ "pinctrl-names", reg, &state);
+ if (ret < 0) {
+ dev_err(mux->dev, "Cannot parse pinctrl-names for mux %d: %d\n",
+ reg, ret);
+ return ret;
+ }
+
+ mux->pdata->pinctrl_states[mux->pdata->bus_count++] = state;
+ }
+
return 0;
}
#else
--
2.1.0
next prev parent reply other threads:[~2015-02-27 12:24 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-17 18:52 [PATCH 0/8] Add proper support for Compulab CM-A510/SBC-A510 Sebastian Hesselbarth
2015-02-17 18:52 ` [PATCH 1/8] i2c: mux-pinctrl: Rework to honor disabled child nodes Sebastian Hesselbarth
[not found] ` <1424199129-22099-2-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-02-17 20:46 ` Stephen Warren
[not found] ` <54E3A8A7.8080703-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2015-02-17 21:08 ` Sebastian Hesselbarth
2015-02-17 21:15 ` Stephen Warren
2015-02-17 21:19 ` Sebastian Hesselbarth
2015-02-26 21:46 ` Stephen Warren
2015-02-17 18:52 ` [PATCH 2/8] devicetree: vendor-prefixes: Add CompuLab to known vendors Sebastian Hesselbarth
2015-02-17 19:37 ` Rob Herring
2015-02-17 18:52 ` [PATCH 7/8] ARM: dts: dove: Add internal i2c multiplexer node Sebastian Hesselbarth
[not found] ` <1424199129-22099-8-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-02-23 15:07 ` Gregory CLEMENT
[not found] ` <1424199129-22099-1-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-02-26 17:55 ` [PATCH 0/8] Add proper support for Compulab CM-A510/SBC-A510 Gregory CLEMENT
2015-02-26 19:39 ` Sebastian Hesselbarth
2015-02-26 20:01 ` Stephen Warren
2015-02-26 20:35 ` Sebastian Hesselbarth
2015-02-27 12:24 ` [PATCH v2 0/4] " Sebastian Hesselbarth
[not found] ` <1425039885-5137-1-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-02-27 12:24 ` Sebastian Hesselbarth [this message]
[not found] ` <1425039885-5137-2-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-03-02 20:01 ` [PATCH v2 1/4] i2c: mux-pinctrl: Rework to honor disabled child nodes Stephen Warren
[not found] ` <54F4C185.9080808-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2015-03-04 9:10 ` Sebastian Hesselbarth
2015-03-09 12:21 ` [PATCH v3 " Sebastian Hesselbarth
[not found] ` <1425903665-19343-1-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-03-10 16:28 ` Stephen Warren
[not found] ` <54FF1BAA.3060409-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2015-03-16 20:15 ` Sebastian Hesselbarth
2015-03-18 12:30 ` Wolfram Sang
2015-03-18 13:23 ` Sebastian Hesselbarth
2015-03-18 14:00 ` Wolfram Sang
2015-03-18 23:10 ` Sebastian Hesselbarth
[not found] ` <550A05E5.3050100-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-03-19 10:09 ` Wolfram Sang
2015-03-19 10:48 ` Wolfram Sang
2015-03-19 15:47 ` Stephen Warren
[not found] ` <550AEF9D.6090307-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2015-03-19 16:02 ` Wolfram Sang
2015-03-19 16:49 ` Stephen Warren
2015-03-19 20:52 ` Sebastian Hesselbarth
2015-03-20 10:19 ` Wolfram Sang
2015-03-21 21:00 ` Wolfram Sang
2015-03-22 13:03 ` Sebastian Hesselbarth
[not found] ` <550EBDBC.9000903-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-03-23 18:32 ` Wolfram Sang
2015-03-27 21:08 ` Sebastian Hesselbarth
[not found] ` <5515C6B6.7080903-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-04-03 18:17 ` Wolfram Sang
2015-02-27 12:24 ` [PATCH v2 2/4] devicetree: vendor-prefixes: Add CompuLab to known vendors Sebastian Hesselbarth
2015-02-27 12:24 ` [PATCH v2 3/4] ARM: dts: dove: Add internal i2c multiplexer node Sebastian Hesselbarth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425039885-5137-2-git-send-email-sebastian.hesselbarth@gmail.com \
--to=sebastian.hesselbarth-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=andrew-g2DYL2Zd6BY@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dobatog-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
--cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).