From: Mikko Perttunen <mikko.perttunen@kapsi.fi>
To: swarren@wwwdotorg.org, thierry.reding@gmail.com,
gnurou@gmail.com, pdeschrijver@nvidia.com, rjw@rjwysocki.net,
viresh.kumar@linaro.org
Cc: mturquette@linaro.org, pwalmsley@nvidia.com, vinceh@nvidia.com,
pgaikwad@nvidia.com, linux-kernel@vger.kernel.org,
linux-pm@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, tuomas.tynkkynen@iki.fi,
Tuomas Tynkkynen <ttynkkynen@nvidia.com>,
Mikko Perttunen <mikko.perttunen@kapsi.fi>,
devicetree@vger.kernel.org
Subject: [PATCH v8 13/18] cpufreq: tegra124: Add device tree bindings
Date: Sun, 1 Mar 2015 14:44:36 +0200 [thread overview]
Message-ID: <1425213881-5262-14-git-send-email-mikko.perttunen@kapsi.fi> (raw)
In-Reply-To: <1425213881-5262-1-git-send-email-mikko.perttunen@kapsi.fi>
From: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
The cpufreq driver for Tegra124 will be a different one than the old
Tegra20 cpufreq driver (tegra-cpufreq), which does not use the device
tree.
Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi>
Cc: devicetree@vger.kernel.org
---
.../bindings/cpufreq/tegra124-cpufreq.txt | 44 ++++++++++++++++++++++
1 file changed, 44 insertions(+)
create mode 100644 Documentation/devicetree/bindings/cpufreq/tegra124-cpufreq.txt
diff --git a/Documentation/devicetree/bindings/cpufreq/tegra124-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/tegra124-cpufreq.txt
new file mode 100644
index 0000000..b1669fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/tegra124-cpufreq.txt
@@ -0,0 +1,44 @@
+Tegra124 CPU frequency scaling driver bindings
+----------------------------------------------
+
+Both required and optional properties listed below must be defined
+under node /cpus/cpu@0.
+
+Required properties:
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - cpu_g: Clock mux for the fast CPU cluster.
+ - cpu_lp: Clock mux for the low-power CPU cluster.
+ - pll_x: Fast PLL clocksource.
+ - pll_p: Auxiliary PLL used during fast PLL rate changes.
+ - dfll: Fast DFLL clocksource that also automatically scales CPU voltage.
+- vdd-cpu-supply: Regulator for CPU voltage
+
+Optional properties:
+- clock-latency: Specify the possible maximum transition latency for clock,
+ in unit of nanoseconds.
+
+Example:
+--------
+cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+
+ clocks = <&tegra_car TEGRA124_CLK_CCLK_G>,
+ <&tegra_car TEGRA124_CLK_CCLK_LP>,
+ <&tegra_car TEGRA124_CLK_PLL_X>,
+ <&tegra_car TEGRA124_CLK_PLL_P>,
+ <&dfll>;
+ clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll";
+ clock-latency = <300000>;
+ vdd-cpu-supply: <&vdd_cpu>;
+ };
+
+ <...>
+};
--
2.3.0
prev parent reply other threads:[~2015-03-01 12:44 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1425213881-5262-1-git-send-email-mikko.perttunen@kapsi.fi>
[not found] ` <1425213881-5262-1-git-send-email-mikko.perttunen-/1wQRMveznE@public.gmane.org>
2015-03-01 12:44 ` [PATCH v8 01/18] clk: tegra: Add binding for the Tegra124 DFLL clocksource Mikko Perttunen
2015-03-01 12:44 ` Mikko Perttunen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425213881-5262-14-git-send-email-mikko.perttunen@kapsi.fi \
--to=mikko.perttunen@kapsi.fi \
--cc=devicetree@vger.kernel.org \
--cc=gnurou@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=pdeschrijver@nvidia.com \
--cc=pgaikwad@nvidia.com \
--cc=pwalmsley@nvidia.com \
--cc=rjw@rjwysocki.net \
--cc=swarren@wwwdotorg.org \
--cc=thierry.reding@gmail.com \
--cc=ttynkkynen@nvidia.com \
--cc=tuomas.tynkkynen@iki.fi \
--cc=vinceh@nvidia.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).