From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mikko Perttunen Subject: [PATCH v8 01/18] clk: tegra: Add binding for the Tegra124 DFLL clocksource Date: Sun, 1 Mar 2015 14:44:24 +0200 Message-ID: <1425213881-5262-2-git-send-email-mikko.perttunen@kapsi.fi> References: <1425213881-5262-1-git-send-email-mikko.perttunen@kapsi.fi> Return-path: In-Reply-To: <1425213881-5262-1-git-send-email-mikko.perttunen-/1wQRMveznE@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org, thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org, rjw-LthD3rsA81gm4RdzfppkhA@public.gmane.org, viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org Cc: mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, pwalmsley-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org, vinceh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org, pgaikwad-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, tuomas.tynkkynen-X3B1VOXEql0@public.gmane.org, Tuomas Tynkkynen , Mikko Perttunen , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org From: Tuomas Tynkkynen The DFLL is the main clocksource for the fast CPU cluster on Tegra124 and also provides automatic CPU rail voltage scaling as well. The DFLL is a separate IP block from the usual Tegra124 clock-and-reset controller, so it gets its own node in the device tree. Signed-off-by: Tuomas Tynkkynen Signed-off-by: Mikko Perttunen Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org --- v8: - Changed dfll@ -> clock@ - Changed compatibility string to "nvidia,tegra124-dfll" - Clarified how the vdd-cpu-supply property is used - Marked nvidia,cg-scale as optional since it is a boolean property - Expanded the 'FS mode' term to 'full speed mode' - Added dvco reset control .../bindings/clock/nvidia,tegra124-dfll.txt | 79 ++++++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt new file mode 100644 index 0000000..ee7e5fd --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt @@ -0,0 +1,79 @@ +NVIDIA Tegra124 DFLL FCPU clocksource + +This binding uses the common clock binding: +Documentation/devicetree/bindings/clock/clock-bindings.txt + +The DFLL IP block on Tegra is a root clocksource designed for clocking +the fast CPU cluster. It consists of a free-running voltage controlled +oscillator connected to the CPU voltage rail (VDD_CPU), and a closed loop +control module that will automatically adjust the VDD_CPU voltage by +communicating with an off-chip PMIC either via an I2C bus or via PWM signals. +Currently only the I2C mode is supported by these bindings. + +Required properties: +- compatible : should be "nvidia,tegra124-dfll" +- reg : Defines the following set of registers, in the order listed: + - registers for the DFLL control logic. + - registers for the I2C output logic. + - registers for the integrated I2C master controller. + - look-up table RAM for voltage register values. +- interrupts: Should contain the DFLL block interrupt. +- clocks: Must contain an entry for each entry in clock-names. + See clock-bindings.txt for details. +- clock-names: Must include the following entries: + - soc: Clock source for the DFLL control logic. + - ref: The closed loop reference clock + - i2c: Clock source for the integrated I2C master. +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - dvco: Reset control for the DFLL DVCO. +- #clock-cells: Must be 0. +- clock-output-names: Name of the clock output. +- vdd-cpu-supply: Regulator for the CPU voltage rail that the DFLL + hardware will start controlling. The regulator will be queried for + the I2C register, control values and supported voltages. + +Required properties for the control loop parameters: +- nvidia,sample-rate: Sample rate of the DFLL control loop. +- nvidia,droop-ctrl: See the register CL_DVFS_DROOP_CTRL in the TRM. +- nvidia,force-mode: See the field DFLL_PARAMS_FORCE_MODE in the TRM. +- nvidia,cf: Numeric value, see the field DFLL_PARAMS_CF_PARAM in the TRM. +- nvidia,ci: Numeric value, see the field DFLL_PARAMS_CI_PARAM in the TRM. +- nvidia,cg: Numeric value, see the field DFLL_PARAMS_CG_PARAM in the TRM. + +Optional properties for the control loop parameters: +- nvidia,cg-scale: Boolean value, see the field DFLL_PARAMS_CG_SCALE in the TRM. + +Required properties for I2C mode: +- nvidia,i2c-fs-rate: I2C transfer rate, if using full speed mode. + +Example: + +clock@0,70110000 { + compatible = "nvidia,tegra124-dfll"; + reg = <0 0x70110000 0 0x100>, /* DFLL control */ + <0 0x70110000 0 0x100>, /* I2C output control */ + <0 0x70110100 0 0x100>, /* Integrated I2C controller */ + <0 0x70110200 0 0x100>; /* Look-up table RAM */ + interrupts = ; + clocks = <&tegra_car TEGRA124_CLK_DFLL_SOC>, + <&tegra_car TEGRA124_CLK_DFLL_REF>, + <&tegra_car TEGRA124_CLK_I2C5>; + clock-names = "soc", "ref", "i2c"; + resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>; + reset-names = "dvco"; + #clock-cells = <0>; + clock-output-names = "dfllCPU_out"; + vdd-cpu-supply = <&vdd_cpu>; + status = "okay"; + + nvidia,sample-rate = <12500>; + nvidia,droop-ctrl = <0x00000f00>; + nvidia,force-mode = <1>; + nvidia,cf = <10>; + nvidia,ci = <0>; + nvidia,cg = <2>; + + nvidia,i2c-fs-rate = <400000>; +}; -- 2.3.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html