[PATCH 1/2 v2] mfd: arizona: Add DT binding for the DMIC reference voltages

[PATCH 1/2 v2] mfd: arizona: Add DT binding for the DMIC reference voltages

[Charles Keepax]

Add a DT binding that lets the DMIC reference voltage source be
specified for each input.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---

The only change since rev 1 is a slight tweak to the wording of
everything to make clear these are voltages.

Thanks,
Charles

 drivers/mfd/arizona-core.c |   10 ++++++++++
 1 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 09ba8f1..d6f306e 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -561,6 +561,16 @@ static int arizona_of_get_core_pdata(struct arizona *arizona)
 		count++;
 	}
 
+	count = 0;
+	of_property_for_each_u32(arizona->dev->of_node, "wlf,dmic-ref", prop,
+				 cur, val) {
+		if (count == ARRAY_SIZE(arizona->pdata.dmic_ref))
+			break;
+
+		arizona->pdata.dmic_ref[count] = val;
+		count++;
+	}
+
 	return 0;
 }
 
-- 
1.7.2.5

[PATCH 2/2 v2] mfd: arizona: Add DT binding documentation for DMIC reference voltages

[Charles Keepax]

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
 Documentation/devicetree/bindings/mfd/arizona.txt |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index bfef000..f1b9b7a 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -49,6 +49,12 @@ Optional properties:
     input singals. If values less than the number of input signals, elements
     that has not been specifed are set to 0 by default.
 
+  - wlf,dmic-ref : DMIC reference voltage source for each input, can be
+    selected from either MICVDD or one of the MICBIAS's, defines
+    (ARIZONA_DMIC_xxxx) are provided in <dt-bindings/mfd/arizona.txt>. If
+    present, the number of values should be less than or equal to the
+    number of inputs, unspecified inputs will use the chip default.
+
   - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
     they are being externally supplied. As covered in
     Documentation/devicetree/bindings/regulator/regulator.txt
-- 
1.7.2.5

Re: [PATCH 2/2 v2] mfd: arizona: Add DT binding documentation for DMIC reference voltages

[Lee Jones]

On Tue, 03 Mar 2015, Charles Keepax wrote:

> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---
>  Documentation/devicetree/bindings/mfd/arizona.txt |    6 ++++++
>  1 files changed, 6 insertions(+), 0 deletions(-)

Applied, thanks.

> diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
> index bfef000..f1b9b7a 100644
> --- a/Documentation/devicetree/bindings/mfd/arizona.txt
> +++ b/Documentation/devicetree/bindings/mfd/arizona.txt
> @@ -49,6 +49,12 @@ Optional properties:
>      input singals. If values less than the number of input signals, elements
>      that has not been specifed are set to 0 by default.
>  
> +  - wlf,dmic-ref : DMIC reference voltage source for each input, can be
> +    selected from either MICVDD or one of the MICBIAS's, defines
> +    (ARIZONA_DMIC_xxxx) are provided in <dt-bindings/mfd/arizona.txt>. If
> +    present, the number of values should be less than or equal to the
> +    number of inputs, unspecified inputs will use the chip default.
> +
>    - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
>      they are being externally supplied. As covered in
>      Documentation/devicetree/bindings/regulator/regulator.txt

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH 1/2 v2] mfd: arizona: Add DT binding for the DMIC reference voltages

[Lee Jones]

On Tue, 03 Mar 2015, Charles Keepax wrote:

> Add a DT binding that lets the DMIC reference voltage source be
> specified for each input.
> 
> Signed-off-by: Charles Keepax <ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
> ---
> 
> The only change since rev 1 is a slight tweak to the wording of
> everything to make clear these are voltages.
> 
> Thanks,
> Charles
> 
>  drivers/mfd/arizona-core.c |   10 ++++++++++
>  1 files changed, 10 insertions(+), 0 deletions(-)

Applied, thanks.

> diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
> index 09ba8f1..d6f306e 100644
> --- a/drivers/mfd/arizona-core.c
> +++ b/drivers/mfd/arizona-core.c
> @@ -561,6 +561,16 @@ static int arizona_of_get_core_pdata(struct arizona *arizona)
>  		count++;
>  	}
>  
> +	count = 0;
> +	of_property_for_each_u32(arizona->dev->of_node, "wlf,dmic-ref", prop,
> +				 cur, val) {
> +		if (count == ARRAY_SIZE(arizona->pdata.dmic_ref))
> +			break;
> +
> +		arizona->pdata.dmic_ref[count] = val;
> +		count++;
> +	}
> +
>  	return 0;
>  }
>  

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html