[PATCH 0/4] Add AM437x RTC

[Dave Gerlach <d-gerlach@ti.com>]

Hi,
This series adds support for the rtc on am437x, as previously the hwmod
and dt entries were missing. The am43x-epos-evm requires special treatment
because the RTC gets disabled in hardware with no way to tell through
software so we add a ti,no-init dt flag for the hwmod layer so we can
avoid writing to the SYSCONFIG register and triggering an external abort.
If we use this flag for the am43x-epos-evm we can add the rtc as normal
to am437x-gp-evm. am437x-sk-evm already has the required dt entry in place. 

Regards,
Dave

Dave Gerlach (3):
  ARM: OMAP2+: omap_hwmod: Introduce ti,no-init dt property
  ARM: OMAP2+: AM43xx hwmod: Add RTC hwmod for AM43xx
  ARM: dts: am43x-epos-evm: Add rtc node with ti,no-init property

Keerthy (1):
  ARM: dts: am437x-gp-evm: Enable RTC

 Documentation/devicetree/bindings/arm/omap/omap.txt | 2 ++
 arch/arm/boot/dts/am437x-gp-evm.dts                 | 4 ++++
 arch/arm/boot/dts/am43x-epos-evm.dts                | 4 ++++
 arch/arm/mach-omap2/omap_hwmod.c                    | 7 ++++++-
 arch/arm/mach-omap2/omap_hwmod.h                    | 4 ++++
 arch/arm/mach-omap2/omap_hwmod_43xx_data.c          | 1 +
 6 files changed, 21 insertions(+), 1 deletion(-)

-- 
2.3.0