From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>,
Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>,
Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
Roman Byshko <rbyshko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH 03/15] musb: Make musb_write_rxfun* and musb_write_rxhub* work like their tx versions
Date: Mon, 9 Mar 2015 21:40:16 +0100 [thread overview]
Message-ID: <1425933628-9672-4-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1425933628-9672-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
For some reason the musb_write_rxfun* and musb_write_rxhub* functions had
a different function prototype and some extra magic needed on the caller side
compared to their tx counterparts, this commit makes them work the same as
their tx counterparts.
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
drivers/usb/musb/musb_core.c | 11 +++--------
drivers/usb/musb/musb_core.h | 2 --
drivers/usb/musb/musb_host.c | 12 ++++++------
drivers/usb/musb/musb_regs.h | 31 ++++++++++++-------------------
4 files changed, 21 insertions(+), 35 deletions(-)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index e6f4cbf..2c43b59 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1546,7 +1546,6 @@ static int musb_core_init(u16 musb_type, struct musb *musb)
#endif
hw_ep->regs = musb->io.ep_offset(i, 0) + mbase;
- hw_ep->target_regs = musb_read_target_reg_base(i, mbase);
hw_ep->rx_reinit = 1;
hw_ep->tx_reinit = 1;
@@ -2332,7 +2331,6 @@ static void musb_restore_context(struct musb *musb)
{
int i;
void __iomem *musb_base = musb->mregs;
- void __iomem *ep_target_regs;
void __iomem *epio;
u8 power;
@@ -2400,14 +2398,11 @@ static void musb_restore_context(struct musb *musb)
musb_write_txhubport(musb_base, i,
musb->context.index_regs[i].txhubport);
- ep_target_regs =
- musb_read_target_reg_base(i, musb_base);
-
- musb_write_rxfunaddr(ep_target_regs,
+ musb_write_rxfunaddr(musb_base, i,
musb->context.index_regs[i].rxfunaddr);
- musb_write_rxhubaddr(ep_target_regs,
+ musb_write_rxhubaddr(musb_base, i,
musb->context.index_regs[i].rxhubaddr);
- musb_write_rxhubport(ep_target_regs,
+ musb_write_rxhubport(musb_base, i,
musb->context.index_regs[i].rxhubport);
}
musb_writeb(musb_base, MUSB_INDEX, musb->context.index);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 5e65958..a31d709 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -240,8 +240,6 @@ struct musb_hw_ep {
void __iomem *fifo_sync_va;
#endif
- void __iomem *target_regs;
-
/* currently scheduled peripheral endpoint */
struct musb_qh *in_qh;
struct musb_qh *out_qh;
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 883a9ad..77006ee 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -555,8 +555,9 @@ musb_host_packet_rx(struct musb *musb, struct urb *urb, u8 epnum, u8 iso_err)
* the busy/not-empty tests are basically paranoia.
*/
static void
-musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
+musb_rx_reinit(struct musb *musb, struct musb_qh *qh, u8 epnum)
{
+ struct musb_hw_ep *ep = musb->endpoints + epnum;
u16 csr;
/* NOTE: we know the "rx" fifo reinit never triggers for ep0.
@@ -594,10 +595,9 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
/* target addr and (for multipoint) hub addr/port */
if (musb->is_multipoint) {
- musb_write_rxfunaddr(ep->target_regs, qh->addr_reg);
- musb_write_rxhubaddr(ep->target_regs, qh->h_addr_reg);
- musb_write_rxhubport(ep->target_regs, qh->h_port_reg);
-
+ musb_write_rxfunaddr(musb->mregs, epnum, qh->addr_reg);
+ musb_write_rxhubaddr(musb->mregs, epnum, qh->h_addr_reg);
+ musb_write_rxhubport(musb->mregs, epnum, qh->h_port_reg);
} else
musb_writeb(musb->mregs, MUSB_FADDR, qh->addr_reg);
@@ -875,7 +875,7 @@ finish:
u16 csr;
if (hw_ep->rx_reinit) {
- musb_rx_reinit(musb, qh, hw_ep);
+ musb_rx_reinit(musb, qh, epnum);
/* init new state: toggle and NYET, maybe DMA later */
if (usb_gettoggle(urb->dev, qh->epnum, 0))
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index 11f0be0..edfc730 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -364,27 +364,25 @@ static inline u16 musb_read_hwvers(void __iomem *mbase)
return musb_readw(mbase, MUSB_HWVERS);
}
-static inline void __iomem *musb_read_target_reg_base(u8 i, void __iomem *mbase)
-{
- return (MUSB_BUSCTL_OFFSET(i, 0) + mbase);
-}
-
-static inline void musb_write_rxfunaddr(void __iomem *ep_target_regs,
+static inline void musb_write_rxfunaddr(void __iomem *mbase, u8 epnum,
u8 qh_addr_reg)
{
- musb_writeb(ep_target_regs, MUSB_RXFUNCADDR, qh_addr_reg);
+ musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXFUNCADDR),
+ qh_addr_reg);
}
-static inline void musb_write_rxhubaddr(void __iomem *ep_target_regs,
+static inline void musb_write_rxhubaddr(void __iomem *mbase, u8 epnum,
u8 qh_h_addr_reg)
{
- musb_writeb(ep_target_regs, MUSB_RXHUBADDR, qh_h_addr_reg);
+ musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBADDR),
+ qh_h_addr_reg);
}
-static inline void musb_write_rxhubport(void __iomem *ep_target_regs,
+static inline void musb_write_rxhubport(void __iomem *mbase, u8 epnum,
u8 qh_h_port_reg)
{
- musb_writeb(ep_target_regs, MUSB_RXHUBPORT, qh_h_port_reg);
+ musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBPORT),
+ qh_h_port_reg);
}
static inline void musb_write_txfunaddr(void __iomem *mbase, u8 epnum,
@@ -556,22 +554,17 @@ static inline u16 musb_read_hwvers(void __iomem *mbase)
return MUSB_HWVERS_1900;
}
-static inline void __iomem *musb_read_target_reg_base(u8 i, void __iomem *mbase)
-{
- return NULL;
-}
-
-static inline void musb_write_rxfunaddr(void __iomem *ep_target_regs,
+static inline void musb_write_rxfunaddr(void __iomem *mbase, u8 epnum,
u8 qh_addr_req)
{
}
-static inline void musb_write_rxhubaddr(void __iomem *ep_target_regs,
+static inline void musb_write_rxhubaddr(void __iomem *mbase, u8 epnum,
u8 qh_h_addr_reg)
{
}
-static inline void musb_write_rxhubport(void __iomem *ep_target_regs,
+static inline void musb_write_rxhubport(void __iomem *mbase, u8 epnum,
u8 qh_h_port_reg)
{
}
--
2.3.1
next prev parent reply other threads:[~2015-03-09 20:40 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-09 20:40 [PATCH 00/15] musb: Add support for the Allwinner sunxi musb controller Hans de Goede
[not found] ` <1425933628-9672-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-03-09 20:40 ` [PATCH 01/15] ARM: sunxi: Add register bit definitions for SRAM mapping syscon Hans de Goede
2015-03-09 20:40 ` [PATCH 02/15] phy-sun4i-usb: Add a helper function to update the iscr register Hans de Goede
[not found] ` <1425933628-9672-3-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-03-09 21:47 ` Arnd Bergmann
2015-03-10 8:04 ` Hans de Goede
[not found] ` <54FEA59B.7020400-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-03-10 8:57 ` Arnd Bergmann
2015-03-10 10:13 ` Hans de Goede
[not found] ` <54FEC3DD.10108-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-03-10 10:53 ` Kishon Vijay Abraham I
[not found] ` <54FECD30.6080106-l0cyMroinI0@public.gmane.org>
2015-03-10 11:03 ` Hans de Goede
[not found] ` <54FECF9F.7020606-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-03-11 9:13 ` Kishon Vijay Abraham I
[not found] ` <55000749.9040606-l0cyMroinI0@public.gmane.org>
2015-03-11 11:39 ` Hans de Goede
[not found] ` <55002970.8090206-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-03-11 12:50 ` Kishon Vijay Abraham I
[not found] ` <55003A15.2070900-l0cyMroinI0@public.gmane.org>
2015-03-11 13:03 ` Hans de Goede
[not found] ` <55003D2B.60502-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-03-11 13:07 ` Kishon Vijay Abraham I
[not found] ` <55003E0D.9040509-l0cyMroinI0@public.gmane.org>
2015-03-11 14:44 ` Hans de Goede
2015-03-09 20:40 ` Hans de Goede [this message]
2015-03-09 20:40 ` [PATCH 04/15] musb: Make busctl_offset an io-op rather then a define Hans de Goede
2015-03-09 20:40 ` [PATCH 05/15] musb: Do not use musb_read[b|w] / _write[b|w] wrappers in generic fifo functions Hans de Goede
[not found] ` <1425933628-9672-6-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-03-09 21:50 ` Arnd Bergmann
2015-03-10 7:43 ` Hans de Goede
[not found] ` <54FEA09A.6040401-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-03-10 8:50 ` Arnd Bergmann
2015-03-10 8:56 ` Hans de Goede
[not found] ` <54FEB1D4.3080700-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-03-10 13:43 ` Arnd Bergmann
2015-03-09 20:40 ` [PATCH 06/15] musb: Fix platform code being unable to override ep access ops Hans de Goede
2015-03-09 20:40 ` [PATCH 07/15] musb: Add support for the Allwinner sunxi musb controller Hans de Goede
2015-03-09 20:40 ` [PATCH 08/15] ARM: dts: sunxi: Add syscon node for controlling SRAM mapping Hans de Goede
2015-03-09 20:40 ` [PATCH 09/15] ARM: dts: sun4i: Add USB Dual Role Controller Hans de Goede
[not found] ` <1425933628-9672-10-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-03-09 23:31 ` Julian Calaby
[not found] ` <CAGRGNgVsf05rtLC2+yOPrbrPV-ceQzPC=ZX1zX+hfNxdC7OX-A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-03-10 9:10 ` Hans de Goede
2015-03-09 20:40 ` [PATCH 10/15] ARM: dts: sun5i: " Hans de Goede
2015-03-09 20:40 ` [PATCH 11/15] ARM: dts: sun7i: " Hans de Goede
2015-03-09 20:40 ` [PATCH 12/15] ARM: dts: sun4i: Enable USB DRC on Chuwi V7 CW0825 Hans de Goede
[not found] ` <1425933628-9672-13-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-03-10 15:07 ` Maxime Ripard
2015-03-10 15:23 ` Hans de Goede
[not found] ` <54FF0C5D.3090706-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-03-10 18:17 ` Maxime Ripard
2015-03-09 20:40 ` [PATCH 13/15] ARM: dts: sun5i: Enable USB DRC on UTOO P66 Hans de Goede
2015-03-09 20:40 ` [PATCH 14/15] ARM: dts: sun7i: Enable USB DRC on Cubietruck Hans de Goede
2015-03-09 20:40 ` [PATCH 15/15] ARM: dts: sun7i: Enable USB DRC on A20-OLinuxIno-Lime Hans de Goede
2015-03-09 21:44 ` [PATCH 00/15] musb: Add support for the Allwinner sunxi musb controller Arnd Bergmann
2015-03-10 1:46 ` Chen-Yu Tsai
[not found] ` <CAGb2v67GkL9Mdr98Chf6MhMff7CO8OGgfF2kaB3Xcnz=SkMG3w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-03-10 7:38 ` Hans de Goede
2015-03-10 8:31 ` Arnd Bergmann
2015-03-10 17:41 ` Maxime Ripard
2015-03-10 22:35 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425933628-9672-4-git-send-email-hdegoede@redhat.com \
--to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=kishon-l0cyMroinI0@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=rbyshko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=wens-jdAy2FN1RRM@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).