Re: [PATCH v9 0/5] i.MX6 PU power domain support

[Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>]

Hi Shawn,

Am Mittwoch, den 11.03.2015, 09:12 +0800 schrieb Shawn Guo:
> On Mon, Feb 23, 2015 at 06:40:10PM +0100, Philipp Zabel wrote:
> > Philipp Zabel (6):
> >   Documentation: Add device tree bindings for Freescale i.MX GPC
> >   ARM: imx6: gpc: Add PU power domain for GPU/VPU
> >   ARM: dts: imx6qdl: Add power-domain information to gpc node
> >   ARM: dts: imx6sl: Add power-domain information to gpc node
> >   ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp
> >     delay
> 
> Applied above 5.
> 
> >   ARM: imx6: gpc: Allow PU regulator bypass
> 
> I only received 5 patches in the series.

Thank you, this shouldn't have appeared in the list at all.

Allowing regulator bypass isn't part of the series because I still
didn't manage to get rid of race conditions when enabling bypass on the
regulator used in two places (gpc and imx6q-cpufreq).

regards
Philipp

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html