devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Eliad Peller <eliad-Ix1uc/W3ht7QT0dZR+AlfA@public.gmane.org>
To: linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: "Arnd Bergmann" <arnd-r2nGTMty4D4@public.gmane.org>,
	"Rob Herring" <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	"Pawel Moll" <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
	"Mark Rutland" <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	"Ian Campbell"
	<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
	"Kumar Gala" <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	"Benoît Cousson"
	<bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
	"Tony Lindgren" <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>,
	"Enric Balletbo i Serra"
	<eballetbo-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	"Javier Martinez Canillas"
	<javier-0uQlZySMnqxg9hUCZPvPmw@public.gmane.org>,
	"Sekhar Nori" <nsekhar-l0cyMroinI0@public.gmane.org>,
	"Kevin Hilman"
	<khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>,
	"Luciano Coelho" <luca-XPOmlcxoEMv1KXRcyAk9cg@public.gmane.org>
Subject: [PATCH v6 2/6] wl12xx: use frequency instead of enumerations for pdata clocks
Date: Thu, 12 Mar 2015 14:09:10 +0200	[thread overview]
Message-ID: <1426162154-8716-3-git-send-email-eliad@wizery.com> (raw)
In-Reply-To: <1426162154-8716-1-git-send-email-eliad-Ix1uc/W3ht7QT0dZR+AlfA@public.gmane.org>

From: Luciano Coelho <luca-XPOmlcxoEMv1KXRcyAk9cg@public.gmane.org>

Instead of defining an enumeration with the FW specific values for the
different clock rates, use the actual frequency instead.  Also add a
boolean to specify whether the clock is XTAL or not.

Change all board files to reflect this.

Signed-off-by: Luciano Coelho <luca-XPOmlcxoEMv1KXRcyAk9cg@public.gmane.org>
[Eliad - small fixes, update board file changes]
Signed-off-by: Eliad Peller <eliad-Ix1uc/W3ht7QT0dZR+AlfA@public.gmane.org>
---
 arch/arm/mach-davinci/board-da850-evm.c |  3 +-
 arch/arm/mach-omap2/pdata-quirks.c      | 29 ++++++++--------
 drivers/net/wireless/ti/wl12xx/main.c   | 60 ++++++++++++++++++++++++++++++---
 drivers/net/wireless/ti/wl12xx/wl12xx.h | 28 +++++++++++++++
 include/linux/wl12xx.h                  | 27 ++-------------
 5 files changed, 103 insertions(+), 44 deletions(-)

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 916589c..853b941 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1386,7 +1386,8 @@ static const short da850_wl12xx_pins[] __initconst = {
 static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = {
 	.irq			= -1,
 	.irq_trigger		= IRQ_TYPE_EDGE_RISING,
-	.board_ref_clock	= WL12XX_REFCLOCK_38,
+	.ref_clock_freq		= 38400000,
+	.ref_clock_xtal		= false,
 };
 
 static __init int da850_wl12xx_init(void)
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 4449f4c..337cc22 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -39,14 +39,14 @@ static struct twl4030_gpio_platform_data twl_gpio_auxdata;
 
 static struct wl12xx_platform_data wl12xx __initdata;
 
-static void __init __used legacy_init_wl12xx(unsigned ref_clock,
-					     unsigned tcxo_clock,
+static void __init __used legacy_init_wl12xx(u32 ref_clock_freq,
+					     u32 tcxo_clock_freq,
 					     int gpio)
 {
 	int res;
 
-	wl12xx.board_ref_clock = ref_clock;
-	wl12xx.board_tcxo_clock = tcxo_clock;
+	wl12xx.ref_clock_freq = ref_clock_freq;
+	wl12xx.tcxo_clock_freq = tcxo_clock_freq;
 	wl12xx.irq = gpio_to_irq(gpio);
 	wl12xx.irq_trigger = IRQ_TYPE_LEVEL_HIGH;
 
@@ -57,8 +57,8 @@ static void __init __used legacy_init_wl12xx(unsigned ref_clock,
 	}
 }
 #else
-static inline void legacy_init_wl12xx(unsigned ref_clock,
-				      unsigned tcxo_clock,
+static inline void legacy_init_wl12xx(u32 ref_clock_freq,
+				      u32 tcxo_clock_freq,
 				      int gpio)
 {
 }
@@ -130,7 +130,7 @@ static void __init omap3_sbc_t3730_twl_init(void)
 static void __init omap3_sbc_t3730_legacy_init(void)
 {
 	omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
-	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 136);
+	legacy_init_wl12xx(38400000, 0, 136);
 }
 
 static void __init omap3_sbc_t3530_legacy_init(void)
@@ -174,12 +174,12 @@ static void __init omap3_igep0030_rev_g_legacy_init(void)
 
 static void __init omap3_evm_legacy_init(void)
 {
-	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 149);
+	legacy_init_wl12xx(38400000, 0, 149);
 }
 
 static void __init omap3_zoom_legacy_init(void)
 {
-	legacy_init_wl12xx(WL12XX_REFCLOCK_26, 0, 162);
+	legacy_init_wl12xx(26000000, 0, 162);
 }
 
 static void am35xx_enable_emac_int(void)
@@ -246,7 +246,7 @@ static void __init omap3_sbc_t3517_legacy_init(void)
 	am35xx_emac_reset();
 	hsmmc2_internal_input_clk();
 	omap3_sbc_t3517_wifi_init();
-	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 145);
+	legacy_init_wl12xx(38400000, 0, 145);
 }
 
 static void __init am3517_evm_legacy_init(void)
@@ -291,18 +291,17 @@ static void __init omap3_tao3530_legacy_init(void)
 #ifdef CONFIG_ARCH_OMAP4
 static void __init omap4_sdp_legacy_init(void)
 {
-	legacy_init_wl12xx(WL12XX_REFCLOCK_26,
-			   WL12XX_TCXOCLOCK_26, 53);
+	legacy_init_wl12xx(26000000, 26000000, 53);
 }
 
 static void __init omap4_panda_legacy_init(void)
 {
-	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53);
+	legacy_init_wl12xx(38400000, 0, 53);
 }
 
 static void __init var_som_om44_legacy_init(void)
 {
-	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 41);
+	legacy_init_wl12xx(38400000, 0, 41);
 }
 #endif
 
@@ -317,7 +316,7 @@ static struct iommu_platform_data omap4_iommu_pdata = {
 #ifdef CONFIG_SOC_AM33XX
 static void __init am335x_evmsk_legacy_init(void)
 {
-	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 31);
+	legacy_init_wl12xx(38400000, 0, 31);
 }
 #endif
 
diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 144d1f8..b3f751f 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1770,6 +1770,40 @@ wl12xx_iface_combinations[] = {
 	},
 };
 
+static const struct wl12xx_clock wl12xx_refclock_table[] = {
+	{ 19200000,	false,	WL12XX_REFCLOCK_19	},
+	{ 26000000,	false,	WL12XX_REFCLOCK_26	},
+	{ 26000000,	true,	WL12XX_REFCLOCK_26_XTAL	},
+	{ 38400000,	false,	WL12XX_REFCLOCK_38	},
+	{ 38400000,	true,	WL12XX_REFCLOCK_38_XTAL	},
+	{ 52000000,	false,	WL12XX_REFCLOCK_52	},
+	{ 0,		false,	0 }
+};
+
+static const struct wl12xx_clock wl12xx_tcxoclock_table[] = {
+	{ 16368000,	true,	WL12XX_TCXOCLOCK_16_368	},
+	{ 16800000,	true,	WL12XX_TCXOCLOCK_16_8	},
+	{ 19200000,	true,	WL12XX_TCXOCLOCK_19_2	},
+	{ 26000000,	true,	WL12XX_TCXOCLOCK_26	},
+	{ 32736000,	true,	WL12XX_TCXOCLOCK_32_736	},
+	{ 33600000,	true,	WL12XX_TCXOCLOCK_33_6	},
+	{ 38400000,	true,	WL12XX_TCXOCLOCK_38_4	},
+	{ 52000000,	true,	WL12XX_TCXOCLOCK_52	},
+	{ 0,		false,	0 }
+};
+
+static int wl12xx_get_clock_idx(const struct wl12xx_clock *table,
+				u32 freq, bool xtal)
+{
+	int i;
+
+	for (i = 0; table[i].freq != 0; i++)
+		if ((table[i].freq == freq) && (table[i].xtal == xtal))
+			return table[i].hw_idx;
+
+	return -EINVAL;
+}
+
 static int wl12xx_setup(struct wl1271 *wl)
 {
 	struct wl12xx_priv *priv = wl->priv;
@@ -1799,7 +1833,17 @@ static int wl12xx_setup(struct wl1271 *wl)
 	wl12xx_conf_init(wl);
 
 	if (!fref_param) {
-		priv->ref_clock = pdata->board_ref_clock;
+		priv->ref_clock = wl12xx_get_clock_idx(wl12xx_refclock_table,
+						       pdata->ref_clock_freq,
+						       pdata->ref_clock_xtal);
+		if (priv->ref_clock < 0) {
+			wl1271_error("Invalid ref_clock frequency (%d Hz, %s)",
+				     pdata->ref_clock_freq,
+				     pdata->ref_clock_xtal ?
+				     "XTAL" : "not XTAL");
+
+			return priv->ref_clock;
+		}
 	} else {
 		if (!strcmp(fref_param, "19.2"))
 			priv->ref_clock = WL12XX_REFCLOCK_19;
@@ -1817,9 +1861,17 @@ static int wl12xx_setup(struct wl1271 *wl)
 			wl1271_error("Invalid fref parameter %s", fref_param);
 	}
 
-	if (!tcxo_param) {
-		priv->tcxo_clock = pdata->board_tcxo_clock;
-	} else {
+	if (!tcxo_param && pdata->tcxo_clock_freq) {
+		priv->tcxo_clock = wl12xx_get_clock_idx(wl12xx_tcxoclock_table,
+							pdata->tcxo_clock_freq,
+							true);
+		if (priv->tcxo_clock < 0) {
+			wl1271_error("Invalid tcxo_clock frequency (%d Hz)",
+				     pdata->tcxo_clock_freq);
+
+			return priv->tcxo_clock;
+		}
+	} else if (tcxo_param) {
 		if (!strcmp(tcxo_param, "19.2"))
 			priv->tcxo_clock = WL12XX_TCXOCLOCK_19_2;
 		else if (!strcmp(tcxo_param, "26"))
diff --git a/drivers/net/wireless/ti/wl12xx/wl12xx.h b/drivers/net/wireless/ti/wl12xx/wl12xx.h
index 75c9265..5952e99a 100644
--- a/drivers/net/wireless/ti/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h
@@ -82,6 +82,34 @@ struct wl12xx_priv {
 	struct wl127x_rx_mem_pool_addr *rx_mem_addr;
 };
 
+/* Reference clock values */
+enum {
+	WL12XX_REFCLOCK_19	= 0, /* 19.2 MHz */
+	WL12XX_REFCLOCK_26	= 1, /* 26 MHz */
+	WL12XX_REFCLOCK_38	= 2, /* 38.4 MHz */
+	WL12XX_REFCLOCK_52	= 3, /* 52 MHz */
+	WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */
+	WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */
+};
+
+/* TCXO clock values */
+enum {
+	WL12XX_TCXOCLOCK_19_2	= 0, /* 19.2MHz */
+	WL12XX_TCXOCLOCK_26	= 1, /* 26 MHz */
+	WL12XX_TCXOCLOCK_38_4	= 2, /* 38.4MHz */
+	WL12XX_TCXOCLOCK_52	= 3, /* 52 MHz */
+	WL12XX_TCXOCLOCK_16_368	= 4, /* 16.368 MHz */
+	WL12XX_TCXOCLOCK_32_736	= 5, /* 32.736 MHz */
+	WL12XX_TCXOCLOCK_16_8	= 6, /* 16.8 MHz */
+	WL12XX_TCXOCLOCK_33_6	= 7, /* 33.6 MHz */
+};
+
+struct wl12xx_clock {
+	u32	freq;
+	bool	xtal;
+	u8	hw_idx;
+};
+
 struct wl12xx_fw_packet_counters {
 	/* Cumulative counter of released packets per AC */
 	u8 tx_released_pkts[NUM_TX_QUEUES];
diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
index 3876b67..eea1e6d 100644
--- a/include/linux/wl12xx.h
+++ b/include/linux/wl12xx.h
@@ -26,28 +26,6 @@
 
 #include <linux/err.h>
 
-/* Reference clock values */
-enum {
-	WL12XX_REFCLOCK_19	= 0, /* 19.2 MHz */
-	WL12XX_REFCLOCK_26	= 1, /* 26 MHz */
-	WL12XX_REFCLOCK_38	= 2, /* 38.4 MHz */
-	WL12XX_REFCLOCK_52	= 3, /* 52 MHz */
-	WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */
-	WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */
-};
-
-/* TCXO clock values */
-enum {
-	WL12XX_TCXOCLOCK_19_2	= 0, /* 19.2MHz */
-	WL12XX_TCXOCLOCK_26	= 1, /* 26 MHz */
-	WL12XX_TCXOCLOCK_38_4	= 2, /* 38.4MHz */
-	WL12XX_TCXOCLOCK_52	= 3, /* 52 MHz */
-	WL12XX_TCXOCLOCK_16_368	= 4, /* 16.368 MHz */
-	WL12XX_TCXOCLOCK_32_736	= 5, /* 32.736 MHz */
-	WL12XX_TCXOCLOCK_16_8	= 6, /* 16.8 MHz */
-	WL12XX_TCXOCLOCK_33_6	= 7, /* 33.6 MHz */
-};
-
 struct wl1251_platform_data {
 	int power_gpio;
 	/* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
@@ -58,8 +36,9 @@ struct wl1251_platform_data {
 struct wl12xx_platform_data {
 	int irq;
 	u32 irq_trigger;
-	int board_ref_clock;
-	int board_tcxo_clock;
+	bool ref_clock_xtal;	/* specify whether the clock is XTAL or not */
+	u32 ref_clock_freq;	/* in Hertz */
+	u32 tcxo_clock_freq;	/* in Hertz, tcxo is always XTAL */
 	bool pwr_in_suspend;
 };
 
-- 
1.8.5.2.229.g4448466.dirty

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2015-03-12 12:09 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-12 12:09 [PATCH v6 0/6] wlcore: add device-tree support Eliad Peller
2015-03-12 12:09 ` [PATCH v6 1/6] wlcore: set irq_trigger in board files instead of hiding behind a quirk Eliad Peller
2015-03-12 12:09 ` [PATCH v6 3/6] dt: bindings: add TI's wilink wireless device Eliad Peller
2015-03-12 12:09 ` [PATCH v6 4/6] wlcore: add device-tree support Eliad Peller
2015-03-12 12:09 ` [PATCH v6 5/6] ARM: dts: add wl12xx/wl18xx bindings Eliad Peller
     [not found]   ` <1426162154-8716-6-git-send-email-eliad-Ix1uc/W3ht7QT0dZR+AlfA@public.gmane.org>
2015-03-13  8:01     ` Javier Martinez Canillas
2015-03-13  8:17       ` Enric Balletbo Serra
2015-03-16 13:08         ` Pau Pajuel
     [not found]           ` <CAN692hmTGDDB3W5TtgfmQK5V9hUGpqVHpF=xK7F_v85cUjcRPw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-03-17  7:02             ` Eliad Peller
2015-03-13 15:27     ` Tony Lindgren
     [not found]       ` <20150313152751.GK5264-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2015-03-15  8:55         ` Eliad Peller
     [not found] ` <1426162154-8716-1-git-send-email-eliad-Ix1uc/W3ht7QT0dZR+AlfA@public.gmane.org>
2015-03-12 12:09   ` Eliad Peller [this message]
     [not found]     ` <1426162154-8716-3-git-send-email-eliad-Ix1uc/W3ht7QT0dZR+AlfA@public.gmane.org>
2015-03-13 15:00       ` [PATCH v6 2/6] wl12xx: use frequency instead of enumerations for pdata clocks Tony Lindgren
2015-03-15  8:43         ` Eliad Peller
     [not found]           ` <CAB3XZEcOytqpJ4pWoemLS3d+DCeA8C75MencDfGn_vhfEYrduw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-03-15 12:08             ` Arnd Bergmann
2015-03-16  6:50               ` Kalle Valo
2015-03-16 15:15                 ` Tony Lindgren
     [not found]                   ` <20150316151554.GO5264-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2015-03-20 14:00                     ` Kalle Valo
2015-03-20 14:54                       ` Tony Lindgren
2015-03-12 12:09   ` [PATCH v6 6/6] wlcore: remove wl12xx_platform_data Eliad Peller
2015-03-13 15:13     ` Tony Lindgren
2015-03-15  8:50       ` Eliad Peller
     [not found]         ` <CAB3XZEdFMQexA69JEuw=VnqsNOEkWAM0+oWWmt6DaN9+hZ+vdw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-03-15 12:08           ` Arnd Bergmann
2015-03-16 15:29             ` Tony Lindgren
2015-03-16 18:25               ` Sebastian Reichel
2015-03-16 18:24                 ` Tony Lindgren
2015-03-17  6:58                   ` Eliad Peller
     [not found]               ` <20150316152939.GP5264-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2015-03-16 20:58                 ` Pali Rohár
2015-03-16 21:01                   ` Tony Lindgren
2015-03-16 21:15                     ` Pali Rohár
2015-03-16 21:25                       ` Tony Lindgren
2015-03-13 16:11 ` [PATCH v6 0/6] wlcore: add device-tree support Sébastien Szymanski
     [not found]   ` <55030C42.6020206-d2DlULPkwbNWk0Htik3J/w@public.gmane.org>
2015-03-15  8:58     ` Eliad Peller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1426162154-8716-3-git-send-email-eliad@wizery.com \
    --to=eliad-ix1uc/w3ht7qt0dzr+alfa@public.gmane.org \
    --cc=arnd-r2nGTMty4D4@public.gmane.org \
    --cc=bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=eballetbo-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=javier-0uQlZySMnqxg9hUCZPvPmw@public.gmane.org \
    --cc=khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=luca-XPOmlcxoEMv1KXRcyAk9cg@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=nsekhar-l0cyMroinI0@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).