devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Agner <stefan@agner.ch>
To: shawn.guo@linaro.org, kernel@pengutronix.de,
	linux@arm.linux.org.uk, u.kleine-koenig@pengutronix.de,
	jason@lakedaemon.net, olof@lixom.net, arnd@arndb.de,
	daniel.lezcano@linaro.org, tglx@linutronix.de,
	mark.rutland@arm.com, pawel.moll@arm.com, robh+dt@kernel.org,
	ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
	marc.zyngier@arm.com, mcoquelin.stm32@gmail.com
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Stefan Agner <stefan@agner.ch>
Subject: [PATCH v3 11/12] ARM: dts: add support for Vybrid running on Cortex-M4
Date: Fri, 13 Mar 2015 00:36:19 +0100	[thread overview]
Message-ID: <1426203380-7155-12-git-send-email-stefan@agner.ch> (raw)
In-Reply-To: <1426203380-7155-1-git-send-email-stefan@agner.ch>

This adds an initial device tree to run Linux on the Cortex-M4 on
the Vybrid based Colibri VF61 module.

Signed-off-by: Stefan Agner <stefan@agner.ch>
---
 arch/arm/boot/dts/Makefile            |  1 +
 arch/arm/boot/dts/vf610m4-colibri.dts | 98 +++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/vf610m4.dtsi        | 50 ++++++++++++++++++
 3 files changed, 149 insertions(+)
 create mode 100644 arch/arm/boot/dts/vf610m4-colibri.dts
 create mode 100644 arch/arm/boot/dts/vf610m4.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a1c776b..3a6ff9f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -309,6 +309,7 @@ dtb-$(CONFIG_SOC_LS1021A) += \
 dtb-$(CONFIG_SOC_VF610) += \
 	vf500-colibri-eval-v3.dtb \
 	vf610-colibri-eval-v3.dtb \
+	vf610m4-colibri.dtb \
 	vf610-cosmic.dtb \
 	vf610-twr.dtb
 dtb-$(CONFIG_ARCH_MXS) += \
diff --git a/arch/arm/boot/dts/vf610m4-colibri.dts b/arch/arm/boot/dts/vf610m4-colibri.dts
new file mode 100644
index 0000000..acd6cb5
--- /dev/null
+++ b/arch/arm/boot/dts/vf610m4-colibri.dts
@@ -0,0 +1,98 @@
+/*
+ * Device tree for Colibri VF61 Cortex-M4 support
+ *
+ * Copyright (C) 2015 Stefan Agner
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "vf610m4.dtsi"
+
+/ {
+	model = "VF610 Cortex-M4";
+	compatible = "fsl,vf610m4";
+
+	chosen {
+		bootargs = "console=ttyLP2,115200 clk_ignore_unused init=/linuxrc rw";
+	};
+
+	memory {
+		reg = <0x8c000000 0x3000000>;
+	};
+};
+
+&gpio0 {
+	status = "disabled";
+};
+
+&gpio1 {
+	status = "disabled";
+};
+
+&gpio2 {
+	status = "disabled";
+};
+
+&gpio3 {
+	status = "disabled";
+};
+
+&gpio4 {
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&iomuxc {
+	vf610-colibri {
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				VF610_PAD_PTD0__UART2_TX		0x21a2
+				VF610_PAD_PTD1__UART2_RX		0x21a1
+				VF610_PAD_PTD2__UART2_RTS		0x21a2
+				VF610_PAD_PTD3__UART2_CTS		0x21a1
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/vf610m4.dtsi b/arch/arm/boot/dts/vf610m4.dtsi
new file mode 100644
index 0000000..9ffe2eb
--- /dev/null
+++ b/arch/arm/boot/dts/vf610m4.dtsi
@@ -0,0 +1,50 @@
+/*
+ * Device tree for VF6xx Cortex-M4 support
+ *
+ * Copyright (C) 2015 Stefan Agner
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armv7-m.dtsi"
+#include "vfxxx.dtsi"
+
+&mscm_ir {
+	interrupt-parent = <&nvic>;
+};
-- 
2.3.1

  parent reply	other threads:[~2015-03-12 23:36 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-12 23:36 [PATCH v3 00/12] ARM: vf610m4: Add Vybrid Cortex-M4 support Stefan Agner
2015-03-12 23:36 ` [PATCH v3 01/12] genirq: generic chip: support hierarchy domain Stefan Agner
2015-03-12 23:36 ` [PATCH v3 02/12] irqchip: nvic: support hierarchy irq domain Stefan Agner
     [not found]   ` <1426203380-7155-3-git-send-email-stefan-XLVq0VzYD2Y@public.gmane.org>
2015-03-13 17:35     ` Maxime Coquelin
     [not found] ` <1426203380-7155-1-git-send-email-stefan-XLVq0VzYD2Y@public.gmane.org>
2015-03-12 23:36   ` [PATCH v3 03/12] irqchip: vf610-mscm: support NVIC parent Stefan Agner
2015-03-23  0:11     ` Jason Cooper
     [not found]       ` <20150323001128.GL15137-fahSIxCzskDQ+YiMSub0/l6hYfS7NtTn@public.gmane.org>
2015-03-23  8:44         ` Stefan Agner
2015-03-12 23:36   ` [PATCH v3 07/12] ARM: imx: depend MXC debug board on 3DS machines Stefan Agner
     [not found]     ` <1426203380-7155-8-git-send-email-stefan-XLVq0VzYD2Y@public.gmane.org>
2015-03-13 13:55       ` Shawn Guo
2015-03-12 23:36 ` [PATCH v3 04/12] ARM: ARMv7M: define size of vector table for Vybrid Stefan Agner
2015-03-12 23:36 ` [PATCH v3 05/12] clocksource: add dependencies for Vybrid pit clocksource Stefan Agner
2015-03-13 10:25   ` Daniel Lezcano
2015-03-12 23:36 ` [PATCH v3 06/12] ARM: unify MMU/!MMU addruart calls Stefan Agner
2015-03-12 23:36 ` [PATCH v3 08/12] ARM: allow MULTIPLATFORM with !MMU Stefan Agner
2015-03-12 23:36 ` [PATCH v3 09/12] ARM: efm32: move into multiplatform Stefan Agner
2015-03-12 23:36 ` [PATCH v3 10/12] ARM: vf610: enable Cortex-M4 on Vybrid SoC Stefan Agner
2015-03-12 23:36 ` Stefan Agner [this message]
2015-03-12 23:36 ` [PATCH v3 12/12] ARM: vf610m4: add defconfig for Linux on Vybrids Cortex-M4 Stefan Agner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1426203380-7155-12-git-send-email-stefan@agner.ch \
    --to=stefan@agner.ch \
    --cc=arnd@arndb.de \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=jason@lakedaemon.net \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=olof@lixom.net \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=shawn.guo@linaro.org \
    --cc=tglx@linutronix.de \
    --cc=u.kleine-koenig@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).