From: Lad Prabhakar <prabhakar.csengg@gmail.com>
To: linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
"Tony Lindgren" <tony@atomide.com>,
"Benoît Cousson" <bcousson@baylibre.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, "Lad,
Prabhakar" <prabhakar.csengg@gmail.com>
Subject: [PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor
Date: Thu, 12 Mar 2015 23:38:21 +0000 [thread overview]
Message-ID: <1426203501-32115-1-git-send-email-prabhakar.csengg@gmail.com> (raw)
From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
this patch does the following:
1: adds DT node for fixed oscillator.
2: adds DT node entries for ov2659 sensor
3: adds remote-endpoint entry for VPFE.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
Note this patch depends on
https://patchwork.kernel.org/patch/6000161/
arch/arm/boot/dts/am437x-gp-evm.dts | 42 +++++++++++++++++++++++++++++++++++--
1 file changed, 40 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index f84d971..195f452 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -106,6 +106,14 @@
};
};
};
+
+ /* fixed 12MHz oscillator */
+ refclk: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+
};
&am43xx_pinmux {
@@ -404,6 +412,21 @@
regulator-always-on;
};
};
+
+ ov2659@30 {
+ compatible = "ovti,ov2659";
+ reg = <0x30>;
+
+ clocks = <&refclk 0>;
+ clock-names = "xvclk";
+
+ port {
+ ov2659_0: endpoint {
+ remote-endpoint = <&vpfe1_ep>;
+ link-frequencies = /bits/ 64 <70000000>;
+ };
+ };
+ };
};
&i2c1 {
@@ -423,6 +446,21 @@
touchscreen-size-x = <1024>;
touchscreen-size-y = <600>;
};
+
+ ov2659@30 {
+ compatible = "ovti,ov2659";
+ reg = <0x30>;
+
+ clocks = <&refclk 0>;
+ clock-names = "xvclk";
+
+ port {
+ ov2659_1: endpoint {
+ remote-endpoint = <&vpfe0_ep>;
+ link-frequencies = /bits/ 64 <70000000>;
+ };
+ };
+ };
};
&epwmss0 {
@@ -626,7 +664,7 @@
port {
vpfe0_ep: endpoint {
- /* remote-endpoint = <&sensor>; add once we have it */
+ remote-endpoint = <&ov2659_1>;
ti,am437x-vpfe-interface = <0>;
bus-width = <8>;
hsync-active = <0>;
@@ -643,7 +681,7 @@
port {
vpfe1_ep: endpoint {
- /* remote-endpoint = <&sensor>; add once we have it */
+ remote-endpoint = <&ov2659_0>;
ti,am437x-vpfe-interface = <0>;
bus-width = <8>;
hsync-active = <0>;
--
2.1.0
next reply other threads:[~2015-03-12 23:38 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-12 23:38 Lad Prabhakar [this message]
2015-03-16 22:17 ` [PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor Tony Lindgren
2015-03-17 1:20 ` Lad, Prabhakar
2015-03-17 2:23 ` Tony Lindgren
[not found] ` <20150317022344.GB31346-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2015-04-10 20:22 ` Lad, Prabhakar
[not found] ` <CA+V-a8u-Y7M9ynJDD05=XeMjZMsb_0Utd-TuwJzEuRziPksvGQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-05-01 8:55 ` Lad, Prabhakar
[not found] ` <20150316221740.GQ12397-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2015-05-20 18:14 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426203501-32115-1-git-send-email-prabhakar.csengg@gmail.com \
--to=prabhakar.csengg@gmail.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).