devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>
Subject: [PATCH RESEND] Doc: dt: arch_timer: discourage clock-frequency use
Date: Fri, 20 Mar 2015 17:57:47 +0000	[thread overview]
Message-ID: <1426874267-24413-1-git-send-email-mark.rutland@arm.com> (raw)

The ARM Generic Timer (AKA the architected timer, arm_arch_timer)
features a CPU register (CNTFRQ) which firmware is intended to
initialize, and non-secure software can read to determine the frequency
of the timer. On CPUs with secure state, this register cannot be written
from non-secure states.

The firmware of early SoCs featuring the timer did not correctly
initialize CNTFRQ correctly on all CPUs, requiring the frequency to be
described in DT as a workaround. This workaround is not complete however
as it is exposed to all software in a privileged non-secure mode
(including guests running under a hypervisor). The firmware and DTs for
recent SoCs have followed the example set by these early SoCs.

This patch updates the arch timer binding documentation to make it
clearer that the use of the clock-frequency property is a poor
work-around. The MMIO generic timer binding is similarly updated, though
this is less of a concern as there is generally no need to expose the
MMIO timers to guest OSs.

Signed-off-by: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Acked-by: Catalin Marinas <catalin.marinas-5wv7dgnIgG8@public.gmane.org>
Acked-by: Marc Zyngier <marc.zyngier-5wv7dgnIgG8@public.gmane.org>
Acked-by: Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>
Acked-by: Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>
---
 Documentation/devicetree/bindings/arm/arch_timer.txt | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

This patch has fallen through the cracks a few times [1,2], though that appears
to be my fault for not sorting out a reasonable Cc list.

Rob, are you happy to take this through your tree?

Mark.

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-August/282804.html
[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-August/282830.html


diff --git a/Documentation/devicetree/bindings/arm/arch_timer.txt b/Documentation/devicetree/bindings/arm/arch_timer.txt
index 256b4d8..e774128 100644
--- a/Documentation/devicetree/bindings/arm/arch_timer.txt
+++ b/Documentation/devicetree/bindings/arm/arch_timer.txt
@@ -17,7 +17,10 @@ to deliver its interrupts via SPIs.
 - interrupts : Interrupt list for secure, non-secure, virtual and
   hypervisor timers, in that order.
 
-- clock-frequency : The frequency of the main counter, in Hz. Optional.
+- clock-frequency : The frequency of the main counter, in Hz. Should be present
+  only where necessary to work around broken firmware which does not configure
+  CNTFRQ on all CPUs to a uniform correct value. Use of this property is
+  strongly discouraged; fix your firmware unless absolutely impossible.
 
 - always-on : a boolean property. If present, the timer is powered through an
   always-on power domain, therefore it never loses context.
@@ -46,7 +49,8 @@ Example:
 
 - compatible : Should at least contain "arm,armv7-timer-mem".
 
-- clock-frequency : The frequency of the main counter, in Hz. Optional.
+- clock-frequency : The frequency of the main counter, in Hz. Should be present
+  only when firmware has not configured the MMIO CNTFRQ registers.
 
 - reg : The control frame base address.
 
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

             reply	other threads:[~2015-03-20 17:57 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-20 17:57 Mark Rutland [this message]
     [not found] ` <1426874267-24413-1-git-send-email-mark.rutland-5wv7dgnIgG8@public.gmane.org>
2015-03-20 18:25   ` [PATCH RESEND] Doc: dt: arch_timer: discourage clock-frequency use Rob Herring
     [not found]     ` <CAL_JsqJfyknhZxGvbWcj1Vj1FGRt40qT9b=xrbhm0wfu-BduTw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-04-16 11:47       ` Mark Rutland
2015-04-16 14:11         ` Rob Herring
     [not found]           ` <CAL_JsqKo7DGzEu03fF_Z_bnNheZFHCMkHpoQCS6ro83wFferEQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-04-16 14:19             ` Mark Rutland

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1426874267-24413-1-git-send-email-mark.rutland@arm.com \
    --to=mark.rutland-5wv7dgnigg8@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).