From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dave Gerlach Subject: [PATCH v3 2/3] ARM: dts: AM33xx: Update and move wkup_m3 node to l4 node Date: Wed, 1 Apr 2015 14:47:09 -0500 Message-ID: <1427917630-43961-3-git-send-email-d-gerlach@ti.com> References: <1427917630-43961-1-git-send-email-d-gerlach@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1427917630-43961-1-git-send-email-d-gerlach@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, devicetree@vger.kernel.org Cc: Ohad Ben-Cohen , Suman Anna , Kevin Hilman , Tony Lindgren , Dave Gerlach List-Id: devicetree@vger.kernel.org From: Suman Anna The WakeupM3 remote processor device node has been moved to be a child node of the newly created l4_wkup node, to reflect its presence properly within the SoC. The node was added previously before any driver support, it is now updated as per the wkup_m3_rproc bindings added alongside the driver support. Signed-off-by: Suman Anna Signed-off-by: Dave Gerlach --- arch/arm/boot/dts/am33xx.dtsi | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 21fcc44..4c1b4a8 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -103,6 +103,15 @@ #size-cells = <1>; ranges = <0 0x44c00000 0x280000>; + wkup_m3: wkup_m3@100000 { + compatible = "ti,am3352-wkup-m3"; + reg = <0x100000 0x4000>, + <0x180000 0x2000>; + reg-names = "umem", "dmem"; + ti,hwmods = "wkup_m3"; + ti,pm-firmware = "am335x-pm-firmware.elf"; + }; + prcm: prcm@200000 { compatible = "ti,am3-prcm"; reg = <0x200000 0x4000>; @@ -762,14 +771,6 @@ reg = <0x40300000 0x10000>; /* 64k */ }; - wkup_m3: wkup_m3@44d00000 { - compatible = "ti,am3353-wkup-m3"; - reg = <0x44d00000 0x4000 /* M3 UMEM */ - 0x44d80000 0x2000>; /* M3 DMEM */ - ti,hwmods = "wkup_m3"; - ti,no-reset-on-init; - }; - elm: elm@48080000 { compatible = "ti,am3352-elm"; reg = <0x48080000 0x2000>; -- 2.3.0