From: Andrew Bresticker <abrestic@chromium.org>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
"David S. Miller" <davem@davemloft.net>
Cc: devicetree@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org,
Andrew Bresticker <abrestic@chromium.org>,
James Hartley <james.hartley@imgtec.com>,
Arnd Bergmann <arnd@arndb.de>
Subject: [PATCH] stmmac: Add an optional register interface clock
Date: Tue, 7 Apr 2015 13:38:45 -0700 [thread overview]
Message-ID: <1428439125-26023-1-git-send-email-abrestic@chromium.org> (raw)
The DWMAC block on certain SoCs (such as IMG Pistachio) have a second
clock which must be enabled in order to access the peripheral's
register interface, so add support for requesting and enabling an
optional "pclk".
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Cc: James Hartley <james.hartley@imgtec.com>
Cc: Arnd Bergmann <arnd@arndb.de>
---
Documentation/devicetree/bindings/net/stmmac.txt | 7 ++++---
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 1 +
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 15 +++++++++++++++
3 files changed, 20 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index 8ca65ce..29aca85 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -35,10 +35,11 @@ Optional properties:
- reset-names: Should contain the reset signal name "stmmaceth", if a
reset phandle is given
- max-frame-size: See ethernet.txt file in the same directory
-- clocks: If present, the first clock should be the GMAC main clock,
- further clocks may be specified in derived bindings.
+- clocks: If present, the first clock should be the GMAC main clock and
+ the second clock should be peripheral's register interface clock. Further
+ clocks may be specified in derived bindings.
- clock-names: One name for each entry in the clocks property, the
- first one should be "stmmaceth".
+ first one should be "stmmaceth" and the second one should be "pclk".
- clk_ptp_ref: this is the PTP reference clock; in case of the PTP is
available this clock is used for programming the Timestamp Addend Register.
If not passed then the system clock will be used and this is fine on some
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index c0a3919..2ac9552 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -97,6 +97,7 @@ struct stmmac_priv {
int wolopts;
int wol_irq;
struct clk *stmmac_clk;
+ struct clk *pclk;
struct reset_control *stmmac_rst;
int clk_csr;
struct timer_list eee_ctrl_timer;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 5336594..06103ca 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2849,6 +2849,16 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
}
clk_prepare_enable(priv->stmmac_clk);
+ priv->pclk = devm_clk_get(priv->device, "pclk");
+ if (IS_ERR(priv->pclk)) {
+ if (PTR_ERR(priv->pclk) == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto error_pclk_get;
+ }
+ priv->pclk = NULL;
+ }
+ clk_prepare_enable(priv->pclk);
+
priv->stmmac_rst = devm_reset_control_get(priv->device,
STMMAC_RESOURCE_NAME);
if (IS_ERR(priv->stmmac_rst)) {
@@ -2934,6 +2944,8 @@ error_mdio_register:
error_netdev_register:
netif_napi_del(&priv->napi);
error_hw_init:
+ clk_disable_unprepare(priv->pclk);
+error_pclk_get:
clk_disable_unprepare(priv->stmmac_clk);
error_clk_get:
free_netdev(ndev);
@@ -2965,6 +2977,7 @@ int stmmac_dvr_remove(struct net_device *ndev)
unregister_netdev(ndev);
if (priv->stmmac_rst)
reset_control_assert(priv->stmmac_rst);
+ clk_disable_unprepare(priv->pclk);
clk_disable_unprepare(priv->stmmac_clk);
free_netdev(ndev);
@@ -3011,6 +3024,7 @@ int stmmac_suspend(struct net_device *ndev)
stmmac_set_mac(priv->ioaddr, false);
pinctrl_pm_select_sleep_state(priv->device);
/* Disable clock in case of PWM is off */
+ clk_disable(priv->pclk);
clk_disable(priv->stmmac_clk);
}
spin_unlock_irqrestore(&priv->lock, flags);
@@ -3051,6 +3065,7 @@ int stmmac_resume(struct net_device *ndev)
pinctrl_pm_select_default_state(priv->device);
/* enable the clk prevously disabled */
clk_enable(priv->stmmac_clk);
+ clk_enable(priv->pclk);
/* reset the phy so that it's ready */
if (priv->mii)
stmmac_mdio_reset(priv->mii);
--
2.2.0.rc0.207.ga3a616c
next reply other threads:[~2015-04-07 20:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-07 20:38 Andrew Bresticker [this message]
[not found] ` <1428439125-26023-1-git-send-email-abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2015-04-08 18:58 ` [PATCH] stmmac: Add an optional register interface clock David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1428439125-26023-1-git-send-email-abrestic@chromium.org \
--to=abrestic@chromium.org \
--cc=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=james.hartley@imgtec.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).