Re: [v2] dt/bindings: qoriq-clock: Add binding for FMan clock mux

[Scott Wood <scottwood@freescale.com>]

On Wed, 2015-04-08 at 10:43 +0300, Igal.Liberman wrote:
> @@ -76,6 +77,52 @@ Required properties:
>  
>  Recommended properties:
>  - clocks: Should be the phandle of input parent clock
> +	For "fsl,fman-clk-mux" clock there are several options for parent
> +	clock (clock provider), the parent is determined according to the
> +	Reset Configuration Word of the specific device:
> +		* P2041, P3041:
> +			* 0 - equal to platform PLL divided by 2
> +			* 1 - equal to PLL2 divided by 2
> +		* P4080 (Both FMans):
> +			* 0 - equal to platform PLL divided by 2
> +			* 1 - equal to PLL3 divided by 2
...


Again, the clock specifier format is determined by the clock provider,
not the clock consumer.

-Scott


_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev