[PATCH] QorIQ/TMU: add TMU node to device tree for QorIQ T104x

[PATCH] QorIQ/TMU: add TMU node to device tree for QorIQ T104x

[Jia Hongtao]

This is Thermal Monitoring Unit for QorIQ platform.

Signed-off-by: Jia Hongtao <hongtao.jia-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 .../devicetree/bindings/thermal/qoriq-thermal.txt  | 58 +++++++++++++++
 arch/powerpc/boot/dts/fsl/qoriq-tmu-t104xsi.dtsi   | 82 ++++++++++++++++++++++
 arch/powerpc/boot/dts/fsl/t1040si-post.dtsi        |  1 +
 3 files changed, 141 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-tmu-t104xsi.dtsi

diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
new file mode 100644
index 0000000..dfc17fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
@@ -0,0 +1,58 @@
+* Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs
+
+Required properties:
+- compatible : "fsl,qoriq-tmu".
+- reg : address range of TMU registers.
+- interrupts : should contain the interrupt for TMU.
+- calibration : calibration table for TMU.
+
+Example:
+
+tmu@f0000 {
+	compatible = "fsl,qoriq-tmu";
+	reg = <0xf0000 0x1000>;
+	interrupts = <18 2 0 0>;
+	calibration = <0x00000000 0x0000000f
+		       0x00000001 0x00000017
+		       0x00000002 0x0000001e
+		       0x00000003 0x00000026
+		       0x00000004 0x0000002e
+		       0x00000005 0x00000035
+		       0x00000006 0x0000003d
+		       0x00000007 0x00000044
+		       0x00000008 0x0000004c
+		       0x00000009 0x00000053
+		       0x0000000a 0x0000005b
+		       0x0000000b 0x00000062
+
+		       0x00010000 0x00000011
+		       0x00010001 0x00000019
+		       0x00010002 0x00000021
+		       0x00010003 0x0000002a
+		       0x00010004 0x00000032
+		       0x00010005 0x0000003a
+		       0x00010006 0x00000042
+		       0x00010007 0x0000004b
+		       0x00010008 0x00000053
+		       0x00010009 0x0000005b
+		       0x0001000a 0x00000063
+
+		       0x00020000 0x00000012
+		       0x00020001 0x0000001b
+		       0x00020002 0x00000024
+		       0x00020003 0x0000002c
+		       0x00020004 0x00000035
+		       0x00020005 0x0000003d
+		       0x00020006 0x00000046
+		       0x00020007 0x0000004e
+		       0x00020008 0x00000057
+
+		       0x00030000 0x00000009
+		       0x00030001 0x00000011
+		       0x00030002 0x00000019
+		       0x00030003 0x00000021
+		       0x00030004 0x00000029
+		       0x00030005 0x00000031
+		       0x00030006 0x00000039
+		       0x00030007 0x00000041>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-tmu-t104xsi.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-tmu-t104xsi.dtsi
new file mode 100644
index 0000000..d85c77d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-tmu-t104xsi.dtsi
@@ -0,0 +1,82 @@
+/*
+ * QorIQ TMU device tree stub [ controller @ offset 0xf0000 ]
+ *
+ * Copyright 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+tmu@f0000 {
+	compatible = "fsl,qoriq-tmu";
+	reg = <0xf0000 0x1000>;
+	interrupts = <18 2 0 0>;
+	calibration = <0x00000000 0x0000000f
+		       0x00000001 0x00000017
+		       0x00000002 0x0000001e
+		       0x00000003 0x00000026
+		       0x00000004 0x0000002e
+		       0x00000005 0x00000035
+		       0x00000006 0x0000003d
+		       0x00000007 0x00000044
+		       0x00000008 0x0000004c
+		       0x00000009 0x00000053
+		       0x0000000a 0x0000005b
+		       0x0000000b 0x00000062
+
+		       0x00010000 0x00000011
+		       0x00010001 0x00000019
+		       0x00010002 0x00000021
+		       0x00010003 0x0000002a
+		       0x00010004 0x00000032
+		       0x00010005 0x0000003a
+		       0x00010006 0x00000042
+		       0x00010007 0x0000004b
+		       0x00010008 0x00000053
+		       0x00010009 0x0000005b
+		       0x0001000a 0x00000063
+
+		       0x00020000 0x00000012
+		       0x00020001 0x0000001b
+		       0x00020002 0x00000024
+		       0x00020003 0x0000002c
+		       0x00020004 0x00000035
+		       0x00020005 0x0000003d
+		       0x00020006 0x00000046
+		       0x00020007 0x0000004e
+		       0x00020008 0x00000057
+
+		       0x00030000 0x00000009
+		       0x00030001 0x00000011
+		       0x00030002 0x00000019
+		       0x00030003 0x00000021
+		       0x00030004 0x00000029
+		       0x00030005 0x00000031
+		       0x00030006 0x00000039
+		       0x00030007 0x00000041>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
index 15ae462..bb9f792 100644
--- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -345,6 +345,7 @@
 		reg	   = <0xea000 0x4000>;
 	};
 
+/include/ "qoriq-tmu-t104xsi.dtsi"
 /include/ "elo3-dma-0.dtsi"
 /include/ "elo3-dma-1.dtsi"
 /include/ "qoriq-espi-0.dtsi"
-- 
2.1.0.27.g96db324

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] QorIQ/TMU: add TMU node to device tree for QorIQ T104x

[Scott Wood]

On Tue, 2015-03-31 at 14:17 +0800, Jia Hongtao wrote:
> This is Thermal Monitoring Unit for QorIQ platform.
> 
> Signed-off-by: Jia Hongtao <hongtao.jia-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> ---
>  .../devicetree/bindings/thermal/qoriq-thermal.txt  | 58 +++++++++++++++
>  arch/powerpc/boot/dts/fsl/qoriq-tmu-t104xsi.dtsi   | 82 ++++++++++++++++++++++
>  arch/powerpc/boot/dts/fsl/t1040si-post.dtsi        |  1 +
>  3 files changed, 141 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
>  create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-tmu-t104xsi.dtsi
> 
> diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> new file mode 100644
> index 0000000..dfc17fa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> @@ -0,0 +1,58 @@
> +* Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs
> +
> +Required properties:
> +- compatible : "fsl,qoriq-tmu".

compatible: Must include "fsl,qoriq-tmu". The version of the device is
	    determined by the TMU IP Block Revision Register (IPBRR0)
	    at offset 0x0BF8.

	    Table of correspondences between IPBRR0 values and example  
	    chips:
		Value           Device
		-----------     -------
		0x01900102      T1040

> +- reg : address range of TMU registers.
> +- interrupts : should contain the interrupt for TMU.

s/should contain/contains/

> +- calibration : calibration table for TMU.

What is the format of the calibration table, and where does one get the
data?

-Scott


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

RE: [PATCH] QorIQ/TMU: add TMU node to device tree for QorIQ T104x

[Hongtao Jia]

> -----Original Message-----
> From: Wood Scott-B07421
> Sent: Friday, April 10, 2015 11:56 AM
> To: Jia Hongtao-B38951
> Cc: linuxppc-dev@lists.ozlabs.org; devicetree@vger.kernel.org;
> robh+dt@kernel.org; rui.zhang@intel.com
> Subject: Re: [PATCH] QorIQ/TMU: add TMU node to device tree for QorIQ
> T104x
> 
> On Tue, 2015-03-31 at 14:17 +0800, Jia Hongtao wrote:
> > This is Thermal Monitoring Unit for QorIQ platform.
> >
> > Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
> > ---
> >  .../devicetree/bindings/thermal/qoriq-thermal.txt  | 58
> +++++++++++++++
> >  arch/powerpc/boot/dts/fsl/qoriq-tmu-t104xsi.dtsi   | 82
> ++++++++++++++++++++++
> >  arch/powerpc/boot/dts/fsl/t1040si-post.dtsi        |  1 +
> >  3 files changed, 141 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> >  create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-tmu-t104xsi.dtsi
> >
> > diff --git
> > a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> > b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> > new file mode 100644
> > index 0000000..dfc17fa
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> > @@ -0,0 +1,58 @@
> > +* Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs
> > +
> > +Required properties:
> > +- compatible : "fsl,qoriq-tmu".
> 
> compatible: Must include "fsl,qoriq-tmu". The version of the device is
> 	    determined by the TMU IP Block Revision Register (IPBRR0)
> 	    at offset 0x0BF8.
> 
> 	    Table of correspondences between IPBRR0 values and example
> 	    chips:
> 		Value           Device
> 		-----------     -------
> 		0x01900102      T1040

I will update it in next version.

> 
> > +- reg : address range of TMU registers.
> > +- interrupts : should contain the interrupt for TMU.
> 
> s/should contain/contains/

Thanks for the correction.

> 
> > +- calibration : calibration table for TMU.
> 
> What is the format of the calibration table, and where does one get the
> data?

There are four calibration config range, for each range we got a couple of
pairs formatted like <TTCFGR, TSCFGR> at offset of <0x0080, 0x0084>.

-Hongtao

> 
> -Scott
> 

Re: [PATCH] QorIQ/TMU: add TMU node to device tree for QorIQ T104x

[Scott Wood]

On Fri, 2015-04-10 at 01:23 -0500, Jia Hongtao-B38951 wrote:
> 
> 
> > -----Original Message-----
> > From: Wood Scott-B07421
> > Sent: Friday, April 10, 2015 11:56 AM
> > To: Jia Hongtao-B38951
> > Cc: linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org; devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org;
> > robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org; rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org
> > Subject: Re: [PATCH] QorIQ/TMU: add TMU node to device tree for QorIQ
> > T104x
> > 
> > On Tue, 2015-03-31 at 14:17 +0800, Jia Hongtao wrote:
> > > This is Thermal Monitoring Unit for QorIQ platform.
> > >
> > > Signed-off-by: Jia Hongtao <hongtao.jia-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> > > ---
> > >  .../devicetree/bindings/thermal/qoriq-thermal.txt  | 58
> > +++++++++++++++
> > >  arch/powerpc/boot/dts/fsl/qoriq-tmu-t104xsi.dtsi   | 82
> > ++++++++++++++++++++++
> > >  arch/powerpc/boot/dts/fsl/t1040si-post.dtsi        |  1 +
> > >  3 files changed, 141 insertions(+)
> > >  create mode 100644
> > > Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> > >  create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-tmu-t104xsi.dtsi
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> > > b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> > > new file mode 100644
> > > index 0000000..dfc17fa
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> > > @@ -0,0 +1,58 @@
> > > +* Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs
> > > +
> > > +Required properties:
> > > +- compatible : "fsl,qoriq-tmu".
> > 
> > compatible: Must include "fsl,qoriq-tmu". The version of the device is
> > 	    determined by the TMU IP Block Revision Register (IPBRR0)
> > 	    at offset 0x0BF8.
> > 
> > 	    Table of correspondences between IPBRR0 values and example
> > 	    chips:
> > 		Value           Device
> > 		-----------     -------
> > 		0x01900102      T1040
> 
> I will update it in next version.
> 
> > 
> > > +- reg : address range of TMU registers.
> > > +- interrupts : should contain the interrupt for TMU.
> > 
> > s/should contain/contains/
> 
> Thanks for the correction.
> 
> > 
> > > +- calibration : calibration table for TMU.
> > 
> > What is the format of the calibration table, and where does one get the
> > data?
> 
> There are four calibration config range, for each range we got a couple of
> pairs formatted like <TTCFGR, TSCFGR> at offset of <0x0080, 0x0084>.

The binding document needs to explain this, in more detail, as well as
how one determines the data.

Is this configuration or hardware description?

-Scott


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

RE: [PATCH] QorIQ/TMU: add TMU node to device tree for QorIQ T104x

[Hongtao Jia]

> -----Original Message-----
> From: Wood Scott-B07421
> Sent: Saturday, April 11, 2015 6:41 AM
> To: Jia Hongtao-B38951
> Cc: linuxppc-dev@lists.ozlabs.org; devicetree@vger.kernel.org;
> robh+dt@kernel.org; rui.zhang@intel.com
> Subject: Re: [PATCH] QorIQ/TMU: add TMU node to device tree for QorIQ
> T104x
> 
> On Fri, 2015-04-10 at 01:23 -0500, Jia Hongtao-B38951 wrote:
> >
> >
> > > -----Original Message-----
> > > From: Wood Scott-B07421
> > > Sent: Friday, April 10, 2015 11:56 AM
> > > To: Jia Hongtao-B38951
> > > Cc: linuxppc-dev@lists.ozlabs.org; devicetree@vger.kernel.org;
> > > robh+dt@kernel.org; rui.zhang@intel.com
> > > Subject: Re: [PATCH] QorIQ/TMU: add TMU node to device tree for
> > > QorIQ T104x
> > >
> > > On Tue, 2015-03-31 at 14:17 +0800, Jia Hongtao wrote:
> > > > This is Thermal Monitoring Unit for QorIQ platform.
> > > >
> > > > Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
> > > > ---
> > > >  .../devicetree/bindings/thermal/qoriq-thermal.txt  | 58
> > > +++++++++++++++
> > > >  arch/powerpc/boot/dts/fsl/qoriq-tmu-t104xsi.dtsi   | 82
> > > ++++++++++++++++++++++
> > > >  arch/powerpc/boot/dts/fsl/t1040si-post.dtsi        |  1 +
> > > >  3 files changed, 141 insertions(+)  create mode 100644
> > > > Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> > > >  create mode 100644
> > > > arch/powerpc/boot/dts/fsl/qoriq-tmu-t104xsi.dtsi
> > > >
> > > > diff --git
> > > > a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> > > > b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> > > > new file mode 100644
> > > > index 0000000..dfc17fa
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> > > > @@ -0,0 +1,58 @@
> > > > +* Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs
> > > > +
> > > > +Required properties:
> > > > +- compatible : "fsl,qoriq-tmu".
> > >
> > > compatible: Must include "fsl,qoriq-tmu". The version of the device
> is
> > > 	    determined by the TMU IP Block Revision Register (IPBRR0)
> > > 	    at offset 0x0BF8.
> > >
> > > 	    Table of correspondences between IPBRR0 values and example
> > > 	    chips:
> > > 		Value           Device
> > > 		-----------     -------
> > > 		0x01900102      T1040
> >
> > I will update it in next version.
> >
> > >
> > > > +- reg : address range of TMU registers.
> > > > +- interrupts : should contain the interrupt for TMU.
> > >
> > > s/should contain/contains/
> >
> > Thanks for the correction.
> >
> > >
> > > > +- calibration : calibration table for TMU.
> > >
> > > What is the format of the calibration table, and where does one get
> > > the data?
> >
> > There are four calibration config range, for each range we got a
> > couple of pairs formatted like <TTCFGR, TSCFGR> at offset of <0x0080,
> 0x0084>.
> 
> The binding document needs to explain this, in more detail, as well as
> how one determines the data.

Right, I will add details.

> 
> Is this configuration or hardware description?

To my understanding this is kind of hardware description.
The calibration data is vary with different SoCs.
These data is provided by hardware verification team.

-Hongtao

> 
> -Scott
>