From: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
To: Kukjin Kim <kgene@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Subject: [PATCH 4/7] ARM: dts: Use phandle notation for overriding nodes in Arndale Octa
Date: Sun, 12 Apr 2015 21:24:51 +0900 [thread overview]
Message-ID: <1428841494-20769-5-git-send-email-k.kozlowski.k@gmail.com> (raw)
In-Reply-To: <1428841494-20769-1-git-send-email-k.kozlowski.k@gmail.com>
The phandle notation reduces possible mistakes when overriding nodes.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
---
arch/arm/boot/dts/exynos5420-arndale-octa.dts | 634 +++++++++++++-------------
1 file changed, 317 insertions(+), 317 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 97346df31d41..7eb0e6b703bf 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -39,323 +39,6 @@
};
};
- codec@11000000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- };
-
- mmc@12200000 {
- status = "okay";
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <0 4>;
- samsung,dw-mshc-ddr-timing = <0 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
- vmmc-supply = <&ldo10_reg>;
- bus-width = <8>;
- cap-mmc-highspeed;
- };
-
- mmc@12220000 {
- status = "okay";
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
- vmmc-supply = <&ldo19_reg>;
- vqmmc-supply = <&ldo13_reg>;
- bus-width = <4>;
- cap-sd-highspeed;
- };
-
- hsi2c_4: i2c@12CA0000 {
- status = "okay";
-
- s2mps11_pmic@66 {
- compatible = "samsung,s2mps11-pmic";
- reg = <0x66>;
- s2mps11,buck2-ramp-delay = <12>;
- s2mps11,buck34-ramp-delay = <12>;
- s2mps11,buck16-ramp-delay = <12>;
- s2mps11,buck6-ramp-enable = <1>;
- s2mps11,buck2-ramp-enable = <1>;
- s2mps11,buck3-ramp-enable = <1>;
- s2mps11,buck4-ramp-enable = <1>;
-
- interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
- pinctrl-names = "default";
- pinctrl-0 = <&s2mps11_irq>;
-
- s2mps11_osc: clocks {
- #clock-cells = <1>;
- clock-output-names = "s2mps11_ap",
- "s2mps11_cp", "s2mps11_bt";
- };
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "PVDD_ALIVE_1V0";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "PVDD_APIO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "PVDD_APIO_MMCON_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "PVDD_ADC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "PVDD_PLL_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "PVDD_ANAIP_1V0";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "PVDD_ANAIP_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "PVDD_ABB_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "PVDD_USB_3V3";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "PVDD_PRE_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "PVDD_USB_1V0";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "PVDD_HSIC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "PVDD_APIO_MMCOFF_2V8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "PVDD_PERI_2V8";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "PVDD_PERI_3V3";
- regulator-min-microvolt = <2200000>;
- regulator-max-microvolt = <2200000>;
- };
-
- ldo18_reg: LDO18 {
- regulator-name = "PVDD_EMMC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo19_reg: LDO19 {
- regulator-name = "PVDD_TFLASH_2V8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo20_reg: LDO20 {
- regulator-name = "PVDD_BTWIFI_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo21_reg: LDO21 {
- regulator-name = "PVDD_CAM1IO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo23_reg: LDO23 {
- regulator-name = "PVDD_MIFS_1V1";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- ldo24_reg: LDO24 {
- regulator-name = "PVDD_CAM1_AVDD_2V8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo26_reg: LDO26 {
- regulator-name = "PVDD_CAM0_AF_2V8";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- ldo27_reg: LDO27 {
- regulator-name = "PVDD_G3DS_1V0";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- ldo28_reg: LDO28 {
- regulator-name = "PVDD_TSP_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo29_reg: LDO29 {
- regulator-name = "PVDD_AUDIO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo31_reg: LDO31 {
- regulator-name = "PVDD_PERI_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo32_reg: LDO32 {
- regulator-name = "PVDD_LCD_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo33_reg: LDO33 {
- regulator-name = "PVDD_CAM0IO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo35_reg: LDO35 {
- regulator-name = "PVDD_CAM0_DVDD_1V2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- ldo38_reg: LDO38 {
- regulator-name = "PVDD_CAM0_AVDD_2V8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "PVDD_MIF_1V1";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "PVDD_INT_1V0";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "PVDD_G3D_1V0";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "PVDD_LPDDR3_1V2";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- buck6_reg: BUCK6 {
- regulator-name = "PVDD_KFC_1V0";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "VIN_LLDO_1V4";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "VIN_MLDO_2V0";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <2000000>;
- regulator-always-on;
- };
-
- buck9_reg: BUCK9 {
- regulator-name = "VIN_HLDO_3V5";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3500000>;
- regulator-always-on;
- };
-
- buck10_reg: BUCK10 {
- regulator-name = "PVDD_EMMCF_2V8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
- };
- };
- };
-
gpio_keys {
compatible = "gpio-keys";
@@ -376,6 +59,323 @@
status = "disabled";
};
+&hsi2c_4 {
+ status = "okay";
+
+ s2mps11_pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+ s2mps11,buck2-ramp-delay = <12>;
+ s2mps11,buck34-ramp-delay = <12>;
+ s2mps11,buck16-ramp-delay = <12>;
+ s2mps11,buck6-ramp-enable = <1>;
+ s2mps11,buck2-ramp-enable = <1>;
+ s2mps11,buck3-ramp-enable = <1>;
+ s2mps11,buck4-ramp-enable = <1>;
+
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s2mps11_irq>;
+
+ s2mps11_osc: clocks {
+ #clock-cells = <1>;
+ clock-output-names = "s2mps11_ap",
+ "s2mps11_cp", "s2mps11_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "PVDD_ALIVE_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "PVDD_APIO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "PVDD_APIO_MMCON_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "PVDD_ADC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "PVDD_PLL_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "PVDD_ANAIP_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "PVDD_ANAIP_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "PVDD_ABB_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "PVDD_USB_3V3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "PVDD_PRE_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "PVDD_USB_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "PVDD_HSIC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "PVDD_APIO_MMCOFF_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "PVDD_PERI_2V8";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "PVDD_PERI_3V3";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "PVDD_EMMC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "PVDD_TFLASH_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "PVDD_BTWIFI_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "PVDD_CAM1IO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "PVDD_MIFS_1V1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "PVDD_CAM1_AVDD_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "PVDD_CAM0_AF_2V8";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "PVDD_G3DS_1V0";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo28_reg: LDO28 {
+ regulator-name = "PVDD_TSP_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo29_reg: LDO29 {
+ regulator-name = "PVDD_AUDIO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo31_reg: LDO31 {
+ regulator-name = "PVDD_PERI_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo32_reg: LDO32 {
+ regulator-name = "PVDD_LCD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo33_reg: LDO33 {
+ regulator-name = "PVDD_CAM0IO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo35_reg: LDO35 {
+ regulator-name = "PVDD_CAM0_DVDD_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo38_reg: LDO38 {
+ regulator-name = "PVDD_CAM0_AVDD_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "PVDD_MIF_1V1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "PVDD_INT_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "PVDD_G3D_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "PVDD_LPDDR3_1V2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "PVDD_KFC_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "VIN_LLDO_1V4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "VIN_MLDO_2V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "VIN_HLDO_3V5";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3500000>;
+ regulator-always-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "PVDD_EMMCF_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ };
+ };
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+ vmmc-supply = <&ldo10_reg>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+};
+
+&mmc_2 {
+ status = "okay";
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+ vmmc-supply = <&ldo19_reg>;
+ vqmmc-supply = <&ldo13_reg>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+};
+
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
--
2.1.0
next prev parent reply other threads:[~2015-04-12 12:24 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-12 12:24 [PATCH 0/7] ARM: dts: Refactor Exynos5 boards for phandle notation Krzysztof Kozlowski
2015-04-12 12:24 ` [PATCH 1/7] ARM: dts: Add labels to nodes used in Exynos5 based DTS Krzysztof Kozlowski
2015-04-12 12:24 ` [PATCH 2/7] ARM: dts: Use phandle notation for overriding nodes in Exynos5250 Krzysztof Kozlowski
2015-04-12 12:24 ` [PATCH 3/7] ARM: dts: Remove duplicated I2C 7 nodes in Snow Krzysztof Kozlowski
2015-04-12 12:24 ` Krzysztof Kozlowski [this message]
2015-04-12 12:24 ` [PATCH 5/7] ARM: dts: Use phandle notation for overriding nodes in Exynos5420 Krzysztof Kozlowski
2015-04-12 12:24 ` [PATCH 6/7] ARM: dts: Use phandle notation for overriding nodes in SMDK5420 Krzysztof Kozlowski
2015-04-12 12:24 ` [PATCH 7/7] ARM: dts: Use phandle notation for overriding nodes in Exynos5440 boards Krzysztof Kozlowski
2015-04-12 20:07 ` [PATCH 0/7] ARM: dts: Refactor Exynos5 boards for phandle notation Arnd Bergmann
2015-04-13 10:54 ` Krzysztof Kozłowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1428841494-20769-5-git-send-email-k.kozlowski.k@gmail.com \
--to=k.kozlowski.k@gmail.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=olof@lixom.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).