From: Bintian Wang <bintian.wang@huawei.com>
To: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, catalin.marinas@arm.com,
will.deacon@arm.com, devicetree@vger.kernel.org,
robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
khilman@linaro.org, mturquette@linaro.org,
rob.herring@linaro.org, zhangfei.gao@linaro.org,
haojian.zhuang@linaro.org, xuwei5@hisilicon.com,
jh80.chung@samsung.com, olof@lixom.net, yanhaifeng@gmail.com,
sboyd@codeaurora.org, xuejiancheng@huawei.com,
sledge.yanwei@huawei.com, tomeu.vizoso@collabora.com,
linux@arm.linux.org.uk, guodong.xu@linaro.org,
jorge.ramirez-ortiz@linaro.org, tyler.baker@linaro.org
Cc: xuyiping@hisilicon.com, wangbinghui@hisilicon.com,
zhenwei.wang@hisilicon.com, victor.lixin@hisilicon.com,
puck.chen@hisilicon.com, dan.zhao@hisilicon.com,
huxinwei@huawei.com, bintian.wang@huawei.com,
z.liuxinliang@huawei.com, heyunlei@huawei.com,
kong.kongxinwei@hisilicon.com, btw@mail.itp.ac.cn,
w.f@huawei.com, liguozhu@hisilicon.com
Subject: [PATCH v2 6/6] arm64: dts: Add dts files for Hisilicon Hi6220 SoC
Date: Mon, 13 Apr 2015 17:17:40 +0800 [thread overview]
Message-ID: <1428916660-25910-7-git-send-email-bintian.wang@huawei.com> (raw)
In-Reply-To: <1428916660-25910-1-git-send-email-bintian.wang@huawei.com>
Add initial dtsi file to support Hisilicon Hi6220 SoC with
support of Octal core CPUs in two clusters and each cluster
has quard Cortex-A53.
Also add dts file to support HiKey development board which
based on Hi6220 SoC.
Signed-off-by: Bintian Wang <bintian.wang@huawei.com>
Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Yiping Xu <xuyiping@hisilicon.com>
---
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/hisilicon/Makefile | 5 +
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 28 ++++
arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 171 +++++++++++++++++++++++++
4 files changed, 205 insertions(+)
create mode 100644 arch/arm64/boot/dts/hisilicon/Makefile
create mode 100644 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
create mode 100644 arch/arm64/boot/dts/hisilicon/hi6220.dtsi
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index e0350ca..3c1c4cf 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -5,5 +5,6 @@ dts-dirs += cavium
dts-dirs += exynos
dts-dirs += freescale
dts-dirs += mediatek
+dts-dirs += hisilicon
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
new file mode 100644
index 0000000..fa81a6e
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
new file mode 100644
index 0000000..c4b3ed8
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -0,0 +1,28 @@
+/*
+ * dts file for Hisilicon HiKey Development Board
+ *
+ * Copyright (C) 2015, Hisilicon Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "hi6220.dtsi"
+
+/ {
+ model = "HiKey Development Board";
+ compatible = "hisilicon,hi6220-hikey";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ linux,stdout-path = &uart0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
new file mode 100644
index 0000000..ca0f64c
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -0,0 +1,171 @@
+/*
+ * dts file for Hisilicon Hi6220 SoC
+ *
+ * Copyright (C) 2015, Hisilicon Ltd.
+ */
+
+#include <dt-bindings/clock/hi6220-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ };
+
+ cpu4: cpu@100 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ };
+
+ cpu5: cpu@101 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ };
+
+ cpu6: cpu@102 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x102>;
+ enable-method = "psci";
+ };
+
+ cpu7: cpu@103 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x103>;
+ enable-method = "psci";
+ };
+ };
+
+ gic: interrupt-controller@f6801000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xf6801000 0 0x1000>, /* GICD */
+ <0x0 0xf6802000 0 0x2000>, /* GICC */
+ <0x0 0xf6804000 0 0x2000>, /* GICH */
+ <0x0 0xf6806000 0 0x2000>; /* GICV */
+ #address-cells = <0>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ao_ctrl: ao_ctrl {
+ compatible = "hisilicon,aoctrl", "syscon";
+ reg = <0x0 0xf7800000 0x0 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ sys_ctrl: sys_ctrl {
+ compatible = "hisilicon,sysctrl", "syscon";
+ reg = <0x0 0xf7030000 0x0 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ media_ctrl: media_ctrl {
+ compatible = "hisilicon,mediactrl", "syscon";
+ reg = <0x0 0xf4410000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ pm_ctrl: pm_ctrl {
+ compatible = "hisilicon,pmctrl", "syscon";
+ reg = <0x0 0xf7032000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ uart0: uart@f8015000 { /* console */
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xf8015000 0x0 0x1000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ao_ctrl HI6220_UART0_PCLK>, <&ao_ctrl HI6220_UART0_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+ };
+};
--
1.9.1
next prev parent reply other threads:[~2015-04-13 9:17 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-13 9:17 [PATCH v2 0/6] arm64,hi6220: Enable Hisilicon Hi6220 SoC Bintian Wang
[not found] ` <1428916660-25910-1-git-send-email-bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-04-13 9:17 ` [PATCH v2 1/6] arm64: Enable Hisilicon ARMv8 SoC family in Kconfig and defconfig Bintian Wang
2015-04-20 21:10 ` Kevin Hilman
[not found] ` <7hvbgqfqv5.fsf-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
2015-04-21 0:39 ` Bintian
2015-04-13 9:17 ` [PATCH v2 2/6] arm64: hi6220: Document devicetree bindings for Hisilicon hi6220 SoC Bintian Wang
2015-04-13 9:17 ` [PATCH v2 5/6] arm64: Kconfig: Add clock support to ARCH_HISI Bintian Wang
2015-04-13 9:17 ` [PATCH v2 3/6] clk: hi6220: Document devicetree bindings for hi6220 clock Bintian Wang
2015-04-13 15:32 ` Arnd Bergmann
2015-04-14 3:35 ` Bintian
[not found] ` <552C8AFE.9040907-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-04-14 10:19 ` Arnd Bergmann
2015-04-14 12:37 ` Bintian
[not found] ` <552D09F7.7080603-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-04-14 13:20 ` Arnd Bergmann
2015-04-14 14:37 ` Brent Wang
2015-04-13 9:17 ` [PATCH v2 4/6] clk: hi6220: Clock driver support for Hisilicon hi6220 SoC Bintian Wang
[not found] ` <1428916660-25910-5-git-send-email-bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-04-13 11:56 ` Paul Bolle
2015-04-13 13:17 ` Bintian
[not found] ` <552BC207.40807-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-04-13 14:15 ` Paul Bolle
2015-04-13 13:30 ` Arnd Bergmann
2015-04-13 13:57 ` Bintian
[not found] ` <552BCB5A.8010705-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-04-13 15:34 ` Arnd Bergmann
2015-04-14 8:53 ` YiPing Xu
2015-04-13 9:17 ` Bintian Wang [this message]
[not found] ` <1428916660-25910-7-git-send-email-bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-04-14 14:44 ` [PATCH v2 6/6] arm64: dts: Add dts files for Hisilicon Hi6220 SoC Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1428916660-25910-7-git-send-email-bintian.wang@huawei.com \
--to=bintian.wang@huawei.com \
--cc=btw@mail.itp.ac.cn \
--cc=catalin.marinas@arm.com \
--cc=dan.zhao@hisilicon.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=guodong.xu@linaro.org \
--cc=haojian.zhuang@linaro.org \
--cc=heyunlei@huawei.com \
--cc=huxinwei@huawei.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jh80.chung@samsung.com \
--cc=jorge.ramirez-ortiz@linaro.org \
--cc=khilman@linaro.org \
--cc=kong.kongxinwei@hisilicon.com \
--cc=liguozhu@hisilicon.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mturquette@linaro.org \
--cc=olof@lixom.net \
--cc=pawel.moll@arm.com \
--cc=puck.chen@hisilicon.com \
--cc=rob.herring@linaro.org \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=sledge.yanwei@huawei.com \
--cc=tomeu.vizoso@collabora.com \
--cc=tyler.baker@linaro.org \
--cc=victor.lixin@hisilicon.com \
--cc=w.f@huawei.com \
--cc=wangbinghui@hisilicon.com \
--cc=will.deacon@arm.com \
--cc=xuejiancheng@huawei.com \
--cc=xuwei5@hisilicon.com \
--cc=xuyiping@hisilicon.com \
--cc=yanhaifeng@gmail.com \
--cc=z.liuxinliang@huawei.com \
--cc=zhangfei.gao@linaro.org \
--cc=zhenwei.wang@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).