From: Alban Bedel <albeu@free.fr>
To: linux-mips@linux-mips.org
Cc: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Thomas Gleixner <tglx@linutronix.de>,
Jason Cooper <jason@lakedaemon.net>,
Ralf Baechle <ralf@linux-mips.org>, Alban Bedel <albeu@free.fr>,
Andrew Bresticker <abrestic@chromium.org>,
Qais Yousef <qais.yousef@imgtec.com>,
Gabor Juhos <juhosg@openwrt.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 00/12] MIPS: ath79: Add OF support and DTS for TL-WR1043ND
Date: Sun, 19 Apr 2015 14:57:56 +0200 [thread overview]
Message-ID: <1429448288-20742-1-git-send-email-albeu@free.fr> (raw)
This series add OF bindings and code support for the interrupt
controllers, clocks and GPIOs. However it was only tested on a
TL-WR1043ND with an AR9132, others SoCs are untested, and a few are
not supported at all.
Most code changes base on the previous bug fix series:
[PATCH v2 0/5] MIPS: ath79: Various small fix to prepare OF support
The requested patch to move the GPIO driver to drivers/gpio is ready and
will follow once it is clearer if this serie get merged.
ChangeLog:
v2: * Fixed the OF bindings and DTS to use ePAPR standardized names
* Fixed the typos in the OF bindings
* Added an ngpios property to the GPIO binding and driver
* Removed all the soc_is_xxx() calls out of the GPIO driver probe()
* Updated the DTS patches to the new directory structure and merged both
in one. Having 3 patches to add Makefile, SoC dtsi and board DTS seemed
a bit overkill.
* Moved the patch to use the common clk API to the bug fix serie to keep
this one cleaner.
Alban Bedel (12):
devicetree: Add bindings for the SoC of the ATH79 familly
MIPS: ath79: Add basic device tree support
devicetree: Add bindings for the ATH79 DDR controllers
devicetree: Add bindings for the ATH79 interrupt controllers
devicetree: Add bindings for the ATH79 MISC interrupt controllers
MIPS: ath79: Add OF support to the IRQ controllers
devicetree: Add bindings for the ATH79 PLL controllers
MIPS: ath79: Add OF support to the clocks
devicetree: Add bindings for the ATH79 GPIO controllers
MIPS: ath79: Add OF support to the GPIO driver
of: Add vendor prefix for TP-Link Technologies Co. Ltd
MIPS: Add basic support for the TL-WR1043ND version 1
.../devicetree/bindings/clock/qca,ath79-pll.txt | 33 ++++++
.../devicetree/bindings/gpio/gpio-ath79.txt | 38 +++++++
.../interrupt-controller/qca,ath79-cpu-intc.txt | 44 ++++++++
.../interrupt-controller/qca,ath79-misc-intc.txt | 30 +++++
.../memory-controllers/ath79-ddr-controller.txt | 35 ++++++
.../devicetree/bindings/mips/ath79-soc.txt | 21 ++++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/mips/Kconfig | 1 +
arch/mips/ath79/Kconfig | 15 +++
arch/mips/ath79/clock.c | 63 +++++++----
arch/mips/ath79/dev-common.c | 51 +++++++++
arch/mips/ath79/gpio.c | 79 ++++++++++----
arch/mips/ath79/irq.c | 87 ++++++++++++++-
arch/mips/ath79/machtypes.h | 1 +
arch/mips/ath79/setup.c | 27 ++++-
arch/mips/boot/dts/Makefile | 1 +
arch/mips/boot/dts/qca/Makefile | 9 ++
arch/mips/boot/dts/qca/ar9132.dtsi | 121 +++++++++++++++++++++
arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts | 83 ++++++++++++++
include/linux/platform_data/gpio-ath79.h | 19 ++++
20 files changed, 716 insertions(+), 43 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/qca,ath79-pll.txt
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ath79.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
create mode 100644 Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt
create mode 100644 Documentation/devicetree/bindings/mips/ath79-soc.txt
create mode 100644 arch/mips/boot/dts/qca/Makefile
create mode 100644 arch/mips/boot/dts/qca/ar9132.dtsi
create mode 100644 arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
create mode 100644 include/linux/platform_data/gpio-ath79.h
--
2.0.0
next reply other threads:[~2015-04-19 12:57 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-19 12:57 Alban Bedel [this message]
2015-04-19 12:57 ` [PATCH v2 01/12] devicetree: Add bindings for the SoC of the ATH79 familly Alban Bedel
2015-04-19 12:57 ` [PATCH v2 02/12] MIPS: ath79: Add basic device tree support Alban Bedel
2015-04-19 12:58 ` [PATCH v2 05/12] devicetree: Add bindings for the ATH79 MISC interrupt controllers Alban Bedel
2015-04-19 12:58 ` [PATCH v2 06/12] MIPS: ath79: Add OF support to the IRQ controllers Alban Bedel
2015-04-19 12:58 ` [PATCH v2 07/12] devicetree: Add bindings for the ATH79 PLL controllers Alban Bedel
[not found] ` <1429448288-20742-8-git-send-email-albeu-GANU6spQydw@public.gmane.org>
2015-04-19 14:30 ` Jonas Gorski
2015-04-19 12:58 ` [PATCH v2 08/12] MIPS: ath79: Add OF support to the clocks Alban Bedel
2015-04-19 14:36 ` [PATCH v2 10/12] MIPS: ath79: Add OF support to the GPIO driver Alban Bedel
[not found] ` <1429448288-20742-1-git-send-email-albeu-GANU6spQydw@public.gmane.org>
2015-04-19 12:57 ` [PATCH v2 03/12] devicetree: Add bindings for the ATH79 DDR controllers Alban Bedel
2015-04-19 13:52 ` Sergei Shtylyov
2015-04-19 12:58 ` [PATCH v2 04/12] devicetree: Add bindings for the ATH79 interrupt controllers Alban Bedel
2015-04-19 13:42 ` [PATCH v2 09/12] devicetree: Add bindings for the ATH79 GPIO controllers Alban Bedel
2015-04-19 14:27 ` Jonas Gorski
2015-04-19 15:01 ` [PATCH v2 11/12] of: Add vendor prefix for TP-Link Technologies Co. Ltd Alban Bedel
2015-04-19 15:27 ` [PATCH v2 12/12] MIPS: Add basic support for the TL-WR1043ND version 1 Alban Bedel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1429448288-20742-1-git-send-email-albeu@free.fr \
--to=albeu@free.fr \
--cc=abrestic@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jason@lakedaemon.net \
--cc=juhosg@openwrt.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=qais.yousef@imgtec.com \
--cc=ralf@linux-mips.org \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).