From: Eric Anholt <eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
Lee Jones <lee-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Eric Anholt <eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
Subject: [PATCH 5/9] ARM: BCM2836: Add io map initialization for bcm2836.
Date: Tue, 21 Apr 2015 11:09:52 -0700 [thread overview]
Message-ID: <1429639796-2169-6-git-send-email-eric@anholt.net> (raw)
In-Reply-To: <1429639796-2169-1-git-send-email-eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
---
arch/arm/mach-bcm/board_bcm2835.c | 30 ++++++++++++++++++++++++++++--
1 file changed, 28 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c
index 70f2f39..69f5821 100644
--- a/arch/arm/mach-bcm/board_bcm2835.c
+++ b/arch/arm/mach-bcm/board_bcm2835.c
@@ -32,6 +32,7 @@
#define PM_RSTS_HADWRH_SET 0x00000040
#define BCM2835_PERIPH_PHYS 0x20000000
+#define BCM2836_PERIPH_PHYS 0x3f000000
#define BCM2835_PERIPH_VIRT 0xf0000000
#define BCM2835_PERIPH_SIZE SZ_16M
@@ -93,16 +94,28 @@ static void bcm2835_power_off(void)
bcm2835_restart(REBOOT_HARD, "");
}
-static struct map_desc io_map __initdata = {
+static struct map_desc bcm2835_io_map __initdata = {
.virtual = BCM2835_PERIPH_VIRT,
.pfn = __phys_to_pfn(BCM2835_PERIPH_PHYS),
.length = BCM2835_PERIPH_SIZE,
.type = MT_DEVICE
};
+static struct map_desc bcm2836_io_map __initdata = {
+ .virtual = BCM2835_PERIPH_VIRT,
+ .pfn = __phys_to_pfn(BCM2836_PERIPH_PHYS),
+ .length = BCM2835_PERIPH_SIZE,
+ .type = MT_DEVICE
+};
+
static void __init bcm2835_map_io(void)
{
- iotable_init(&io_map, 1);
+ iotable_init(&bcm2835_io_map, 1);
+}
+
+static void __init bcm2836_map_io(void)
+{
+ iotable_init(&bcm2836_io_map, 1);
}
static void __init bcm2835_init(void)
@@ -128,6 +141,11 @@ static const char * const bcm2835_compat[] = {
NULL
};
+static const char * const bcm2836_compat[] = {
+ "brcm,bcm2836",
+ NULL
+};
+
DT_MACHINE_START(BCM2835, "BCM2835")
.map_io = bcm2835_map_io,
.init_irq = irqchip_init,
@@ -135,3 +153,11 @@ DT_MACHINE_START(BCM2835, "BCM2835")
.restart = bcm2835_restart,
.dt_compat = bcm2835_compat
MACHINE_END
+
+DT_MACHINE_START(BCM2836, "BCM2836")
+ .map_io = bcm2836_map_io,
+ .init_irq = irqchip_init,
+ .init_machine = bcm2835_init,
+ .restart = bcm2835_restart,
+ .dt_compat = bcm2836_compat
+MACHINE_END
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-04-21 18:09 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-21 18:09 BCM2836 (Raspberry Pi 2) port Eric Anholt
[not found] ` <1429639796-2169-1-git-send-email-eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
2015-04-21 18:09 ` [PATCH 1/9] dt-bindings: Add root properties for Raspberry Pi 2 Eric Anholt
[not found] ` <1429639796-2169-2-git-send-email-eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
2015-04-24 4:27 ` Stephen Warren
2015-04-21 18:09 ` [PATCH 2/9] ARM: BCM2835: Split peripheral definitions off to a common include Eric Anholt
[not found] ` <1429639796-2169-3-git-send-email-eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
2015-04-24 4:28 ` Stephen Warren
2015-04-21 18:09 ` [PATCH 3/9] ARM: Make a copy of the 2835 dts for the 2836 Eric Anholt
[not found] ` <1429639796-2169-4-git-send-email-eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
2015-04-24 4:35 ` Stephen Warren
2015-04-21 18:09 ` [PATCH 4/9] ARM: Update the device trees for 2836 Eric Anholt
[not found] ` <1429639796-2169-5-git-send-email-eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
2015-04-24 4:36 ` Stephen Warren
2015-04-21 18:09 ` Eric Anholt [this message]
[not found] ` <1429639796-2169-6-git-send-email-eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
2015-04-21 18:53 ` [PATCH 5/9] ARM: BCM2836: Add io map initialization for bcm2836 Arnd Bergmann
2015-04-21 20:37 ` Eric Anholt
[not found] ` <87oamh9q12.fsf-omZaPlIz5HhaEpDpdNBo/KxOck334EZe@public.gmane.org>
2015-04-21 21:11 ` Arnd Bergmann
2015-04-21 23:02 ` Eric Anholt
[not found] ` <87bnihhypw.fsf-omZaPlIz5HhaEpDpdNBo/KxOck334EZe@public.gmane.org>
2015-04-22 7:22 ` Arnd Bergmann
2015-04-24 7:16 ` Arnd Bergmann
2015-04-21 18:09 ` [PATCH 6/9] ARM: Make a Kconfig option for shared BCM2835/BCM2836 code Eric Anholt
2015-04-21 18:09 ` [PATCH 7/9] ARM: Add Kconfig support for bcm2836 Eric Anholt
[not found] ` <1429639796-2169-8-git-send-email-eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
2015-04-21 18:59 ` Arnd Bergmann
2015-04-21 20:38 ` Eric Anholt
[not found] ` <87lhhl9pzf.fsf-omZaPlIz5HhaEpDpdNBo/KxOck334EZe@public.gmane.org>
2015-04-24 3:30 ` Stephen Warren
2015-04-21 18:09 ` [PATCH 8/9] ARM: Add MAINTAINERS for 2836 Eric Anholt
[not found] ` <1429639796-2169-9-git-send-email-eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
2015-04-24 4:38 ` Stephen Warren
[not found] ` <5539C8C9.1010705-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2015-04-24 17:03 ` Eric Anholt
2015-04-21 18:09 ` [PATCH 9/9] ARM: BCM283x: Register fixed clocks for uart in the DT Eric Anholt
[not found] ` <1429639796-2169-10-git-send-email-eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
2015-04-24 4:44 ` Stephen Warren
[not found] ` <5539CA1A.1040009-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2015-04-24 17:06 ` Eric Anholt
[not found] ` <87vbglwj5c.fsf-omZaPlIz5HhaEpDpdNBo/KxOck334EZe@public.gmane.org>
2015-04-25 4:23 ` Stephen Warren
2015-04-24 4:25 ` BCM2836 (Raspberry Pi 2) port Stephen Warren
[not found] ` <5539C5A4.5070409-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2015-04-24 18:41 ` Eric Anholt
[not found] ` <87pp6tweql.fsf-omZaPlIz5HhaEpDpdNBo/KxOck334EZe@public.gmane.org>
2015-04-24 18:57 ` Stephen Warren
[not found] ` <553A9201.3080308-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2015-04-27 17:19 ` Eric Anholt
2015-05-08 16:14 ` Alexander Stein
2015-05-12 2:36 ` Stephen Warren
[not found] ` <55516738.306-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2015-05-12 15:39 ` Alexander Stein
2015-05-12 16:03 ` Stephen Warren
[not found] ` <55522468.3050606-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2015-05-12 17:32 ` Eric Anholt
[not found] ` <87d2254s6y.fsf-omZaPlIz5HhaEpDpdNBo/KxOck334EZe@public.gmane.org>
2015-05-12 22:03 ` Stephen Warren
[not found] ` <555278BA.50903-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2015-05-13 17:46 ` Eric Anholt
[not found] ` <87wq0c4bgv.fsf-omZaPlIz5HhaEpDpdNBo/KxOck334EZe@public.gmane.org>
2015-05-13 18:32 ` Stephen Warren
[not found] ` <555398DB.8050206-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2015-05-13 18:59 ` Eric Anholt
2015-04-29 2:38 ` Stephen Warren
[not found] ` <5540443C.8070604-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2015-04-29 3:41 ` Florian Fainelli
2015-05-06 18:51 ` Eric Anholt
[not found] ` <87a8xh1qve.fsf-omZaPlIz5HhaEpDpdNBo/KxOck334EZe@public.gmane.org>
2015-05-06 19:05 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1429639796-2169-6-git-send-email-eric@anholt.net \
--to=eric-whkq6xtqapystnjn9+bgxg@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lee-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).