From mboxrd@z Thu Jan 1 00:00:00 1970 From: Irina Tirdea Subject: [PATCH v2 2/4] iio: magn: bmc150_magn: Add devicetree binding documentation Date: Thu, 23 Apr 2015 21:34:06 +0300 Message-ID: <1429814048-22808-3-git-send-email-irina.tirdea@intel.com> References: <1429814048-22808-1-git-send-email-irina.tirdea@intel.com> Return-path: In-Reply-To: <1429814048-22808-1-git-send-email-irina.tirdea@intel.com> Sender: linux-kernel-owner@vger.kernel.org To: Jonathan Cameron , linux-iio@vger.kernel.org, devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org, Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Irina Tirdea List-Id: devicetree@vger.kernel.org Add binding documentation for Bosch BMC150 magnetometer. Signed-off-by: Irina Tirdea --- .../bindings/iio/magnetometer/bmc150_magn.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt diff --git a/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt new file mode 100644 index 0000000..9f263b7 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt @@ -0,0 +1,22 @@ +* Bosch BMC150 magnetometer sensor + +http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-04.pdf + +Required properties: + + - compatible : should be "bosch,bmc150_magn" + - reg : the I2C address of the magnetometer + +Optional properties: + + - interrupt-parent : phandle to the parent interrupt controller + - interrupts : interrupt mapping for GPIO IRQ + +Example: + +bmc150_magn@12 { + compatible = "bosch,bmc150_magn"; + reg = <0x12>; + interrupt-parent = <&gpio1>; + interrupts = <0 1>; +}; -- 1.9.1