* [PATCH V4 0/4] i2c: busses: xgene: I2C proxy driver for X-Gene
@ 2015-04-24 17:11 Feng Kan
2015-04-24 17:11 ` [PATCH V4 1/4] i2c: busses: add SLIMpro I2C device driver on APM X-Gene platform Feng Kan
` (3 more replies)
0 siblings, 4 replies; 6+ messages in thread
From: Feng Kan @ 2015-04-24 17:11 UTC (permalink / raw)
To: patches-qTEPVZfXA3Y, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-acpi-u79uwXL29TY76Z2rM5mHXA,
linux-i2c-u79uwXL29TY76Z2rM5mHXA
Cc: Feng Kan
This is a proxy I2C driver for APM X-Gene SoC. It uses the mailbox driver
to tunnel i2c transactions via the SLIMpro processor.
V4 Change:
- Remove PRP0001 and use a real ACPI id
V3 Change:
- Add ACPI support
- Fix previous comments.
Feng Kan (4):
i2c: busses: add SLIMpro I2C device driver on APM X-Gene platform
i2c: busses: xgene: add acpi support for i2c xgene SLIMpro driver
Documentation: i2c: Add APM X-Gene platform SLIMpro I2C driver
documentation
arm64: dts: add proxy I2C device driver on APM X-Gene platform
.../devicetree/bindings/i2c/i2c-xgene-slimpro.txt | 15 +
arch/arm64/boot/dts/apm/apm-storm.dtsi | 5 +
drivers/i2c/busses/Kconfig | 9 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-xgene-slimpro.c | 469 +++++++++++++++++++++
5 files changed, 499 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt
create mode 100644 drivers/i2c/busses/i2c-xgene-slimpro.c
--
1.9.1
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH V4 1/4] i2c: busses: add SLIMpro I2C device driver on APM X-Gene platform 2015-04-24 17:11 [PATCH V4 0/4] i2c: busses: xgene: I2C proxy driver for X-Gene Feng Kan @ 2015-04-24 17:11 ` Feng Kan 2015-04-24 18:13 ` Feng Kan 2015-04-24 17:11 ` [PATCH V4 2/4] i2c: busses: xgene: add acpi support for i2c xgene SLIMpro driver Feng Kan ` (2 subsequent siblings) 3 siblings, 1 reply; 6+ messages in thread From: Feng Kan @ 2015-04-24 17:11 UTC (permalink / raw) To: patches, devicetree, linux-kernel, linux-acpi, linux-i2c Cc: Feng Kan, Hieu Le Add SLIMpro I2C device driver on APM X-Gene platform. This I2C device driver use the SLIMpro Mailbox driver to tunnel message to the SLIMpro coprocessor to do the work of accessing I2C components. Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Hieu Le <hnle@apm.com> --- drivers/i2c/busses/Kconfig | 9 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-xgene-slimpro.c | 459 +++++++++++++++++++++++++++++++++ 3 files changed, 469 insertions(+) create mode 100644 drivers/i2c/busses/i2c-xgene-slimpro.c diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 22da9c2..1ac07d0 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -1082,6 +1082,15 @@ config I2C_CROS_EC_TUNNEL connected there. This will work whatever the interface used to talk to the EC (SPI, I2C or LPC). +config I2C_XGENE_SLIMPRO + tristate "APM X-Gene SoC I2C SLIMpro devices support" + depends on ARCH_XGENE && MAILBOX + help + Enable I2C bus access using the APM X-Gene SoC SLIMpro + co-processor. The I2C device access the I2C bus via the X-Gene + to SLIMpro (On chip coprocessor) mailbox mechanism. + If unsure, say N. + config SCx200_ACB tristate "Geode ACCESS.bus support" depends on X86_32 && PCI diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 3638feb..9cf9c4b 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -107,6 +107,7 @@ obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o obj-$(CONFIG_I2C_OPAL) += i2c-opal.o obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o +obj-$(CONFIG_I2C_XGENE_SLIMPRO) += i2c-xgene-slimpro.o obj-$(CONFIG_SCx200_ACB) += scx200_acb.o ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG diff --git a/drivers/i2c/busses/i2c-xgene-slimpro.c b/drivers/i2c/busses/i2c-xgene-slimpro.c new file mode 100644 index 0000000..afe4cf2 --- /dev/null +++ b/drivers/i2c/busses/i2c-xgene-slimpro.c @@ -0,0 +1,459 @@ +/* + * X-Gene SLIMpro I2C Driver + * + * Copyright (c) 2014, Applied Micro Circuits Corporation + * Author: Feng Kan <fkan@apm.com> + * Author: Hieu Le <hnle@apm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + * This driver provides support for X-Gene SLIMpro I2C device access + * using the APM X-Gene SLIMpro mailbox driver. + * + */ +#include <linux/dma-mapping.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/mailbox_client.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/version.h> + +#define MAILBOX_OP_TIMEOUT 1000 /* Operation time out in ms */ +#define MAILBOX_I2C_INDEX 0 +#define SLIMPRO_IIC_BUS 1 /* Use I2C bus 1 only */ + +#define SMBUS_CMD_LEN 1 +#define BYTE_DATA 1 +#define WORD_DATA 2 +#define BLOCK_DATA 3 + +#define SLIMPRO_IIC_I2C_PROTOCOL 0 +#define SLIMPRO_IIC_SMB_PROTOCOL 1 + +#define SLIMPRO_IIC_READ 0 +#define SLIMPRO_IIC_WRITE 1 + +#define IIC_SMB_WITHOUT_DATA_LEN 0 +#define IIC_SMB_WITH_DATA_LEN 1 + +#define SLIMPRO_DEBUG_MSG 0 +#define SLIMPRO_MSG_TYPE_SHIFT 28 +#define SLIMPRO_DBG_SUBTYPE_I2C1READ 4 +#define SLIMPRO_DBGMSG_TYPE_SHIFT 24 +#define SLIMPRO_DBGMSG_TYPE_MASK 0x0F000000U +#define SLIMPRO_IIC_DEV_SHIFT 23 +#define SLIMPRO_IIC_DEV_MASK 0x00800000U +#define SLIMPRO_IIC_DEVID_SHIFT 13 +#define SLIMPRO_IIC_DEVID_MASK 0x007FE000U +#define SLIMPRO_IIC_RW_SHIFT 12 +#define SLIMPRO_IIC_RW_MASK 0x00001000U +#define SLIMPRO_IIC_PROTO_SHIFT 11 +#define SLIMPRO_IIC_PROTO_MASK 0x00000800U +#define SLIMPRO_IIC_ADDRLEN_SHIFT 8 +#define SLIMPRO_IIC_ADDRLEN_MASK 0x00000700U +#define SLIMPRO_IIC_DATALEN_SHIFT 0 +#define SLIMPRO_IIC_DATALEN_MASK 0x000000FFU + +/* + * SLIMpro I2C message encode + * + * dev - Controller number (0-based) + * chip - I2C chip address + * op - SLIMPRO_IIC_READ or SLIMPRO_IIC_WRITE + * proto - SLIMPRO_IIC_SMB_PROTOCOL or SLIMPRO_IIC_I2C_PROTOCOL + * addrlen - Length of the address field + * datalen - Length of the data field + */ +#define SLIMPRO_IIC_ENCODE_MSG(dev, chip, op, proto, addrlen, datalen) \ + ((SLIMPRO_DEBUG_MSG << SLIMPRO_MSG_TYPE_SHIFT) | \ + ((SLIMPRO_DBG_SUBTYPE_I2C1READ << SLIMPRO_DBGMSG_TYPE_SHIFT) & \ + SLIMPRO_DBGMSG_TYPE_MASK) | \ + ((dev << SLIMPRO_IIC_DEV_SHIFT) & SLIMPRO_IIC_DEV_MASK) | \ + ((chip << SLIMPRO_IIC_DEVID_SHIFT) & SLIMPRO_IIC_DEVID_MASK) | \ + ((op << SLIMPRO_IIC_RW_SHIFT) & SLIMPRO_IIC_RW_MASK) | \ + ((proto << SLIMPRO_IIC_PROTO_SHIFT) & SLIMPRO_IIC_PROTO_MASK) | \ + ((addrlen << SLIMPRO_IIC_ADDRLEN_SHIFT) & SLIMPRO_IIC_ADDRLEN_MASK) | \ + ((datalen << SLIMPRO_IIC_DATALEN_SHIFT) & SLIMPRO_IIC_DATALEN_MASK)) + +/* + * Encode for upper address for block data + */ +#define SLIMPRO_IIC_ENCODE_FLAG_BUFADDR 0x80000000 +#define SLIMPRO_IIC_ENCODE_FLAG_WITH_DATA_LEN(a) ((u32) (((a) << 30) \ + & 0x40000000)) +#define SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(a) ((u32) (((a) >> 12) \ + & 0x3FF00000)) +#define SLIMPRO_IIC_ENCODE_ADDR(a) ((a) & 0x000FFFFF) + +struct slimpro_i2c_dev { + struct i2c_adapter adapter; + struct device *dev; + struct mbox_chan *mbox_chan; + struct mbox_client mbox_client; + struct completion rd_complete; + u8 dma_buffer[I2C_SMBUS_BLOCK_MAX]; + u32 *resp_msg; +}; + +#define to_slimpro_i2c_dev(cl) \ + container_of(cl, struct slimpro_i2c_dev, mbox_client) + +static void slimpro_i2c_rx_cb(struct mbox_client *cl, void *mssg) +{ + struct slimpro_i2c_dev *ctx = to_slimpro_i2c_dev(cl); + + /* + * Response message format: + * mssg[0] is the return code of the operation + * mssg[1] is the first data word + * mssg[2] is NOT used + */ + if (ctx->resp_msg) + *ctx->resp_msg = ((u32 *)mssg)[1]; + + if (ctx->mbox_client.tx_block) + complete(&ctx->rd_complete); +} + +static int start_i2c_msg_xfer(struct slimpro_i2c_dev *ctx) +{ + if (ctx->mbox_client.tx_block) { + if (!wait_for_completion_timeout(&ctx->rd_complete, + msecs_to_jiffies(MAILBOX_OP_TIMEOUT))) + return -ETIMEDOUT; + } + + /* Check of invalid data or no device */ + if (*ctx->resp_msg == 0xffffffff) + return -ENODEV; + + return 0; +} + +static int slimpro_i2c_rd(struct slimpro_i2c_dev *ctx, u32 chip, + u32 addr, u32 addrlen, u32 protocol, + u32 readlen, u32 *data) +{ + u32 msg[3]; + int rc; + + msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, + SLIMPRO_IIC_READ, protocol, addrlen, readlen); + msg[1] = SLIMPRO_IIC_ENCODE_ADDR(addr); + msg[2] = 0; + ctx->resp_msg = data; + rc = mbox_send_message(ctx->mbox_chan, &msg); + if (rc < 0) + goto err; + + rc = start_i2c_msg_xfer(ctx); +err: + ctx->resp_msg = NULL; + return rc; +} + +static int slimpro_i2c_wr(struct slimpro_i2c_dev *ctx, u32 chip, + u32 addr, u32 addrlen, u32 protocol, u32 writelen, + u32 data) +{ + u32 msg[3]; + int rc; + + msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, + SLIMPRO_IIC_WRITE, protocol, addrlen, writelen); + msg[1] = SLIMPRO_IIC_ENCODE_ADDR(addr); + msg[2] = data; + ctx->resp_msg = msg; + + rc = mbox_send_message(ctx->mbox_chan, &msg); + if (rc < 0) + goto err; + + rc = start_i2c_msg_xfer(ctx); +err: + ctx->resp_msg = NULL; + return rc; +} + +static int slimpro_i2c_blkrd(struct slimpro_i2c_dev *ctx, u32 chip, u32 addr, + u32 addrlen, u32 protocol, u32 readlen, + u32 with_data_len, void *data) +{ + dma_addr_t paddr; + u32 msg[3]; + int rc; + + paddr = dma_map_single(ctx->dev, ctx->dma_buffer, readlen, DMA_FROM_DEVICE); + rc = dma_mapping_error(ctx->dev, paddr); + if (rc) { + dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n", + ctx->dma_buffer); + goto err; + } + + msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, SLIMPRO_IIC_READ, + protocol, addrlen, readlen); + msg[1] = SLIMPRO_IIC_ENCODE_FLAG_BUFADDR | + SLIMPRO_IIC_ENCODE_FLAG_WITH_DATA_LEN(with_data_len) | + SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(paddr) | + SLIMPRO_IIC_ENCODE_ADDR(addr); + msg[2] = (u32)paddr; + ctx->resp_msg = msg; + + rc = mbox_send_message(ctx->mbox_chan, &msg); + if (rc < 0) + goto err_unmap; + + rc = start_i2c_msg_xfer(ctx); + + /* Copy to destination */ + memcpy(data, ctx->dma_buffer, readlen); + +err_unmap: + dma_unmap_single(ctx->dev, paddr, readlen, DMA_FROM_DEVICE); +err: + ctx->resp_msg = NULL; + return rc; +} + +static int slimpro_i2c_blkwr(struct slimpro_i2c_dev *ctx, u32 chip, + u32 addr, u32 addrlen, u32 protocol, u32 writelen, + void *data) +{ + dma_addr_t paddr; + u32 msg[3]; + int rc; + + memcpy(ctx->dma_buffer, data, writelen); + paddr = dma_map_single(ctx->dev, ctx->dma_buffer, writelen, + DMA_TO_DEVICE); + rc = dma_mapping_error(ctx->dev, paddr); + if (rc) { + dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n", + ctx->dma_buffer); + goto err; + } + + msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, SLIMPRO_IIC_WRITE, + protocol, addrlen, writelen); + msg[1] = SLIMPRO_IIC_ENCODE_FLAG_BUFADDR | + SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(paddr) | + SLIMPRO_IIC_ENCODE_ADDR(addr); + msg[2] = (u32)paddr; + ctx->resp_msg = msg; + + if (ctx->mbox_client.tx_block) + reinit_completion(&ctx->rd_complete); + + rc = mbox_send_message(ctx->mbox_chan, &msg); + if (rc < 0) + goto err_unmap; + + rc = start_i2c_msg_xfer(ctx); + +err_unmap: + dma_unmap_single(ctx->dev, paddr, writelen, DMA_TO_DEVICE); +err: + ctx->resp_msg = NULL; + return rc; +} + +static int xgene_slimpro_i2c_xfer(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, + union i2c_smbus_data *data) +{ + struct slimpro_i2c_dev *ctx = i2c_get_adapdata(adap); + int ret = -EOPNOTSUPP; + u32 val; + + switch (size) { + case I2C_SMBUS_BYTE: + if (read_write == I2C_SMBUS_READ) { + ret = slimpro_i2c_rd(ctx, addr, 0, 0, + SLIMPRO_IIC_SMB_PROTOCOL, + BYTE_DATA, &val); + data->byte = val; + } else { + ret = slimpro_i2c_wr(ctx, addr, command, SMBUS_CMD_LEN, + SLIMPRO_IIC_SMB_PROTOCOL, + 0, 0); + } + break; + case I2C_SMBUS_BYTE_DATA: + if (read_write == I2C_SMBUS_READ) { + ret = slimpro_i2c_rd(ctx, addr, command, SMBUS_CMD_LEN, + SLIMPRO_IIC_SMB_PROTOCOL, + BYTE_DATA, &val); + data->byte = val; + } else { + val = data->byte; + ret = slimpro_i2c_wr(ctx, addr, command, SMBUS_CMD_LEN, + SLIMPRO_IIC_SMB_PROTOCOL, + BYTE_DATA, val); + } + break; + case I2C_SMBUS_WORD_DATA: + if (read_write == I2C_SMBUS_READ) { + ret = slimpro_i2c_rd(ctx, addr, command, SMBUS_CMD_LEN, + SLIMPRO_IIC_SMB_PROTOCOL, + WORD_DATA, &val); + data->word = val; + } else { + val = data->word; + ret = slimpro_i2c_wr(ctx, addr, command, SMBUS_CMD_LEN, + SLIMPRO_IIC_SMB_PROTOCOL, + WORD_DATA, val); + } + break; + case I2C_SMBUS_BLOCK_DATA: + if (read_write == I2C_SMBUS_READ) { + ret = slimpro_i2c_blkrd(ctx, addr, command, + SMBUS_CMD_LEN, + SLIMPRO_IIC_SMB_PROTOCOL, + I2C_SMBUS_BLOCK_MAX + 1, + IIC_SMB_WITH_DATA_LEN, + &data->block[0]); + + } else { + ret = slimpro_i2c_blkwr(ctx, addr, command, + SMBUS_CMD_LEN, + SLIMPRO_IIC_SMB_PROTOCOL, + data->block[0] + 1, + &data->block[0]); + } + break; + case I2C_SMBUS_I2C_BLOCK_DATA: + if (read_write == I2C_SMBUS_READ) { + ret = slimpro_i2c_blkrd(ctx, addr, + command, + SMBUS_CMD_LEN, + SLIMPRO_IIC_I2C_PROTOCOL, + I2C_SMBUS_BLOCK_MAX, + IIC_SMB_WITHOUT_DATA_LEN, + &data->block[1]); + } else { + ret = slimpro_i2c_blkwr(ctx, addr, command, + SMBUS_CMD_LEN, + SLIMPRO_IIC_I2C_PROTOCOL, + data->block[0], + &data->block[1]); + } + break; + default: + break; + } + return ret; +} + +/* +* Return list of supported functionality. +*/ +static u32 xgene_slimpro_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA | + I2C_FUNC_SMBUS_I2C_BLOCK; +} + +static struct i2c_algorithm xgene_slimpro_i2c_algorithm = { + .smbus_xfer = xgene_slimpro_i2c_xfer, + .functionality = xgene_slimpro_i2c_func, +}; + +static int __init xgene_slimpro_i2c_probe(struct platform_device *pdev) +{ + struct slimpro_i2c_dev *ctx; + struct i2c_adapter *adapter; + struct mbox_client *cl; + int rc; + + ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->dev = &pdev->dev; + platform_set_drvdata(pdev, ctx); + cl = &ctx->mbox_client; + + /* Request mailbox channel */ + cl->dev = &pdev->dev; + cl->rx_callback = slimpro_i2c_rx_cb; + cl->tx_block = true; + init_completion(&ctx->rd_complete); + cl->tx_tout = MAILBOX_OP_TIMEOUT; + cl->knows_txdone = false; + ctx->mbox_chan = mbox_request_channel(cl, MAILBOX_I2C_INDEX); + if (IS_ERR(ctx->mbox_chan)) { + dev_err(&pdev->dev, "i2c mailbox channel request failed\n"); + return PTR_ERR(ctx->mbox_chan); + } + + rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); + if (rc) + dev_warn(&pdev->dev, "Unable to set dma mask\n"); + + /* Setup I2C adapter */ + adapter = &ctx->adapter; + snprintf(adapter->name, sizeof(adapter->name), "MAILBOX I2C"); + adapter->algo = &xgene_slimpro_i2c_algorithm; + adapter->class = I2C_CLASS_HWMON; + adapter->dev.parent = &pdev->dev; + i2c_set_adapdata(adapter, ctx); + rc = i2c_add_adapter(adapter); + if (rc) { + dev_err(&pdev->dev, "Adapter registeration failed\n"); + return rc; + } + + dev_info(&pdev->dev, "Mailbox I2C Adapter registered\n"); + return 0; +} + +static int xgene_slimpro_i2c_remove(struct platform_device *pdev) +{ + struct slimpro_i2c_dev *ctx = platform_get_drvdata(pdev); + + i2c_del_adapter(&ctx->adapter); + + mbox_free_channel(ctx->mbox_chan); + + return 0; +} + +static const struct of_device_id xgene_slimpro_i2c_id[] = { + {.compatible = "apm,xgene-slimpro-i2c" }, + {}, +}; +MODULE_DEVICE_TABLE(of, xgene_slimpro_i2c_dt_ids); + +static struct platform_driver xgene_slimpro_i2c_driver = { + .probe = xgene_slimpro_i2c_probe, + .remove = xgene_slimpro_i2c_remove, + .driver = { + .name = "xgene-slimpro-i2c", + .of_match_table = of_match_ptr(xgene_slimpro_i2c_id) + }, +}; + +module_platform_driver(xgene_slimpro_i2c_driver); + +MODULE_DESCRIPTION("APM X-Gene SLIMpro I2C driver"); +MODULE_AUTHOR("Feng Kan <fkan@apm.com>"); +MODULE_AUTHOR("Hieu Le <hnle@apm.com>"); +MODULE_LICENSE("GPL"); -- 1.9.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH V4 1/4] i2c: busses: add SLIMpro I2C device driver on APM X-Gene platform 2015-04-24 17:11 ` [PATCH V4 1/4] i2c: busses: add SLIMpro I2C device driver on APM X-Gene platform Feng Kan @ 2015-04-24 18:13 ` Feng Kan 0 siblings, 0 replies; 6+ messages in thread From: Feng Kan @ 2015-04-24 18:13 UTC (permalink / raw) To: patches, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org, linux-i2c Cc: Feng Kan, Hieu Le Sorry, please disregard this series. Made a mistake here, will fix and resend. On Fri, Apr 24, 2015 at 10:11 AM, Feng Kan <fkan@apm.com> wrote: > Add SLIMpro I2C device driver on APM X-Gene platform. This I2C > device driver use the SLIMpro Mailbox driver to tunnel message to > the SLIMpro coprocessor to do the work of accessing I2C components. > > Signed-off-by: Feng Kan <fkan@apm.com> > Signed-off-by: Hieu Le <hnle@apm.com> > --- > drivers/i2c/busses/Kconfig | 9 + > drivers/i2c/busses/Makefile | 1 + > drivers/i2c/busses/i2c-xgene-slimpro.c | 459 +++++++++++++++++++++++++++++++++ > 3 files changed, 469 insertions(+) > create mode 100644 drivers/i2c/busses/i2c-xgene-slimpro.c > > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig > index 22da9c2..1ac07d0 100644 > --- a/drivers/i2c/busses/Kconfig > +++ b/drivers/i2c/busses/Kconfig > @@ -1082,6 +1082,15 @@ config I2C_CROS_EC_TUNNEL > connected there. This will work whatever the interface used to > talk to the EC (SPI, I2C or LPC). > > +config I2C_XGENE_SLIMPRO > + tristate "APM X-Gene SoC I2C SLIMpro devices support" > + depends on ARCH_XGENE && MAILBOX > + help > + Enable I2C bus access using the APM X-Gene SoC SLIMpro > + co-processor. The I2C device access the I2C bus via the X-Gene > + to SLIMpro (On chip coprocessor) mailbox mechanism. > + If unsure, say N. > + > config SCx200_ACB > tristate "Geode ACCESS.bus support" > depends on X86_32 && PCI > diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile > index 3638feb..9cf9c4b 100644 > --- a/drivers/i2c/busses/Makefile > +++ b/drivers/i2c/busses/Makefile > @@ -107,6 +107,7 @@ obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o > obj-$(CONFIG_I2C_OPAL) += i2c-opal.o > obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o > obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o > +obj-$(CONFIG_I2C_XGENE_SLIMPRO) += i2c-xgene-slimpro.o > obj-$(CONFIG_SCx200_ACB) += scx200_acb.o > > ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG > diff --git a/drivers/i2c/busses/i2c-xgene-slimpro.c b/drivers/i2c/busses/i2c-xgene-slimpro.c > new file mode 100644 > index 0000000..afe4cf2 > --- /dev/null > +++ b/drivers/i2c/busses/i2c-xgene-slimpro.c > @@ -0,0 +1,459 @@ > +/* > + * X-Gene SLIMpro I2C Driver > + * > + * Copyright (c) 2014, Applied Micro Circuits Corporation > + * Author: Feng Kan <fkan@apm.com> > + * Author: Hieu Le <hnle@apm.com> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, see <http://www.gnu.org/licenses/>. > + * > + * This driver provides support for X-Gene SLIMpro I2C device access > + * using the APM X-Gene SLIMpro mailbox driver. > + * > + */ > +#include <linux/dma-mapping.h> > +#include <linux/i2c.h> > +#include <linux/interrupt.h> > +#include <linux/mailbox_client.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/platform_device.h> > +#include <linux/version.h> > + > +#define MAILBOX_OP_TIMEOUT 1000 /* Operation time out in ms */ > +#define MAILBOX_I2C_INDEX 0 > +#define SLIMPRO_IIC_BUS 1 /* Use I2C bus 1 only */ > + > +#define SMBUS_CMD_LEN 1 > +#define BYTE_DATA 1 > +#define WORD_DATA 2 > +#define BLOCK_DATA 3 > + > +#define SLIMPRO_IIC_I2C_PROTOCOL 0 > +#define SLIMPRO_IIC_SMB_PROTOCOL 1 > + > +#define SLIMPRO_IIC_READ 0 > +#define SLIMPRO_IIC_WRITE 1 > + > +#define IIC_SMB_WITHOUT_DATA_LEN 0 > +#define IIC_SMB_WITH_DATA_LEN 1 > + > +#define SLIMPRO_DEBUG_MSG 0 > +#define SLIMPRO_MSG_TYPE_SHIFT 28 > +#define SLIMPRO_DBG_SUBTYPE_I2C1READ 4 > +#define SLIMPRO_DBGMSG_TYPE_SHIFT 24 > +#define SLIMPRO_DBGMSG_TYPE_MASK 0x0F000000U > +#define SLIMPRO_IIC_DEV_SHIFT 23 > +#define SLIMPRO_IIC_DEV_MASK 0x00800000U > +#define SLIMPRO_IIC_DEVID_SHIFT 13 > +#define SLIMPRO_IIC_DEVID_MASK 0x007FE000U > +#define SLIMPRO_IIC_RW_SHIFT 12 > +#define SLIMPRO_IIC_RW_MASK 0x00001000U > +#define SLIMPRO_IIC_PROTO_SHIFT 11 > +#define SLIMPRO_IIC_PROTO_MASK 0x00000800U > +#define SLIMPRO_IIC_ADDRLEN_SHIFT 8 > +#define SLIMPRO_IIC_ADDRLEN_MASK 0x00000700U > +#define SLIMPRO_IIC_DATALEN_SHIFT 0 > +#define SLIMPRO_IIC_DATALEN_MASK 0x000000FFU > + > +/* > + * SLIMpro I2C message encode > + * > + * dev - Controller number (0-based) > + * chip - I2C chip address > + * op - SLIMPRO_IIC_READ or SLIMPRO_IIC_WRITE > + * proto - SLIMPRO_IIC_SMB_PROTOCOL or SLIMPRO_IIC_I2C_PROTOCOL > + * addrlen - Length of the address field > + * datalen - Length of the data field > + */ > +#define SLIMPRO_IIC_ENCODE_MSG(dev, chip, op, proto, addrlen, datalen) \ > + ((SLIMPRO_DEBUG_MSG << SLIMPRO_MSG_TYPE_SHIFT) | \ > + ((SLIMPRO_DBG_SUBTYPE_I2C1READ << SLIMPRO_DBGMSG_TYPE_SHIFT) & \ > + SLIMPRO_DBGMSG_TYPE_MASK) | \ > + ((dev << SLIMPRO_IIC_DEV_SHIFT) & SLIMPRO_IIC_DEV_MASK) | \ > + ((chip << SLIMPRO_IIC_DEVID_SHIFT) & SLIMPRO_IIC_DEVID_MASK) | \ > + ((op << SLIMPRO_IIC_RW_SHIFT) & SLIMPRO_IIC_RW_MASK) | \ > + ((proto << SLIMPRO_IIC_PROTO_SHIFT) & SLIMPRO_IIC_PROTO_MASK) | \ > + ((addrlen << SLIMPRO_IIC_ADDRLEN_SHIFT) & SLIMPRO_IIC_ADDRLEN_MASK) | \ > + ((datalen << SLIMPRO_IIC_DATALEN_SHIFT) & SLIMPRO_IIC_DATALEN_MASK)) > + > +/* > + * Encode for upper address for block data > + */ > +#define SLIMPRO_IIC_ENCODE_FLAG_BUFADDR 0x80000000 > +#define SLIMPRO_IIC_ENCODE_FLAG_WITH_DATA_LEN(a) ((u32) (((a) << 30) \ > + & 0x40000000)) > +#define SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(a) ((u32) (((a) >> 12) \ > + & 0x3FF00000)) > +#define SLIMPRO_IIC_ENCODE_ADDR(a) ((a) & 0x000FFFFF) > + > +struct slimpro_i2c_dev { > + struct i2c_adapter adapter; > + struct device *dev; > + struct mbox_chan *mbox_chan; > + struct mbox_client mbox_client; > + struct completion rd_complete; > + u8 dma_buffer[I2C_SMBUS_BLOCK_MAX]; > + u32 *resp_msg; > +}; > + > +#define to_slimpro_i2c_dev(cl) \ > + container_of(cl, struct slimpro_i2c_dev, mbox_client) > + > +static void slimpro_i2c_rx_cb(struct mbox_client *cl, void *mssg) > +{ > + struct slimpro_i2c_dev *ctx = to_slimpro_i2c_dev(cl); > + > + /* > + * Response message format: > + * mssg[0] is the return code of the operation > + * mssg[1] is the first data word > + * mssg[2] is NOT used > + */ > + if (ctx->resp_msg) > + *ctx->resp_msg = ((u32 *)mssg)[1]; > + > + if (ctx->mbox_client.tx_block) > + complete(&ctx->rd_complete); > +} > + > +static int start_i2c_msg_xfer(struct slimpro_i2c_dev *ctx) > +{ > + if (ctx->mbox_client.tx_block) { > + if (!wait_for_completion_timeout(&ctx->rd_complete, > + msecs_to_jiffies(MAILBOX_OP_TIMEOUT))) > + return -ETIMEDOUT; > + } > + > + /* Check of invalid data or no device */ > + if (*ctx->resp_msg == 0xffffffff) > + return -ENODEV; > + > + return 0; > +} > + > +static int slimpro_i2c_rd(struct slimpro_i2c_dev *ctx, u32 chip, > + u32 addr, u32 addrlen, u32 protocol, > + u32 readlen, u32 *data) > +{ > + u32 msg[3]; > + int rc; > + > + msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, > + SLIMPRO_IIC_READ, protocol, addrlen, readlen); > + msg[1] = SLIMPRO_IIC_ENCODE_ADDR(addr); > + msg[2] = 0; > + ctx->resp_msg = data; > + rc = mbox_send_message(ctx->mbox_chan, &msg); > + if (rc < 0) > + goto err; > + > + rc = start_i2c_msg_xfer(ctx); > +err: > + ctx->resp_msg = NULL; > + return rc; > +} > + > +static int slimpro_i2c_wr(struct slimpro_i2c_dev *ctx, u32 chip, > + u32 addr, u32 addrlen, u32 protocol, u32 writelen, > + u32 data) > +{ > + u32 msg[3]; > + int rc; > + > + msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, > + SLIMPRO_IIC_WRITE, protocol, addrlen, writelen); > + msg[1] = SLIMPRO_IIC_ENCODE_ADDR(addr); > + msg[2] = data; > + ctx->resp_msg = msg; > + > + rc = mbox_send_message(ctx->mbox_chan, &msg); > + if (rc < 0) > + goto err; > + > + rc = start_i2c_msg_xfer(ctx); > +err: > + ctx->resp_msg = NULL; > + return rc; > +} > + > +static int slimpro_i2c_blkrd(struct slimpro_i2c_dev *ctx, u32 chip, u32 addr, > + u32 addrlen, u32 protocol, u32 readlen, > + u32 with_data_len, void *data) > +{ > + dma_addr_t paddr; > + u32 msg[3]; > + int rc; > + > + paddr = dma_map_single(ctx->dev, ctx->dma_buffer, readlen, DMA_FROM_DEVICE); > + rc = dma_mapping_error(ctx->dev, paddr); > + if (rc) { > + dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n", > + ctx->dma_buffer); > + goto err; > + } > + > + msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, SLIMPRO_IIC_READ, > + protocol, addrlen, readlen); > + msg[1] = SLIMPRO_IIC_ENCODE_FLAG_BUFADDR | > + SLIMPRO_IIC_ENCODE_FLAG_WITH_DATA_LEN(with_data_len) | > + SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(paddr) | > + SLIMPRO_IIC_ENCODE_ADDR(addr); > + msg[2] = (u32)paddr; > + ctx->resp_msg = msg; > + > + rc = mbox_send_message(ctx->mbox_chan, &msg); > + if (rc < 0) > + goto err_unmap; > + > + rc = start_i2c_msg_xfer(ctx); > + > + /* Copy to destination */ > + memcpy(data, ctx->dma_buffer, readlen); > + > +err_unmap: > + dma_unmap_single(ctx->dev, paddr, readlen, DMA_FROM_DEVICE); > +err: > + ctx->resp_msg = NULL; > + return rc; > +} > + > +static int slimpro_i2c_blkwr(struct slimpro_i2c_dev *ctx, u32 chip, > + u32 addr, u32 addrlen, u32 protocol, u32 writelen, > + void *data) > +{ > + dma_addr_t paddr; > + u32 msg[3]; > + int rc; > + > + memcpy(ctx->dma_buffer, data, writelen); > + paddr = dma_map_single(ctx->dev, ctx->dma_buffer, writelen, > + DMA_TO_DEVICE); > + rc = dma_mapping_error(ctx->dev, paddr); > + if (rc) { > + dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n", > + ctx->dma_buffer); > + goto err; > + } > + > + msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, SLIMPRO_IIC_WRITE, > + protocol, addrlen, writelen); > + msg[1] = SLIMPRO_IIC_ENCODE_FLAG_BUFADDR | > + SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(paddr) | > + SLIMPRO_IIC_ENCODE_ADDR(addr); > + msg[2] = (u32)paddr; > + ctx->resp_msg = msg; > + > + if (ctx->mbox_client.tx_block) > + reinit_completion(&ctx->rd_complete); > + > + rc = mbox_send_message(ctx->mbox_chan, &msg); > + if (rc < 0) > + goto err_unmap; > + > + rc = start_i2c_msg_xfer(ctx); > + > +err_unmap: > + dma_unmap_single(ctx->dev, paddr, writelen, DMA_TO_DEVICE); > +err: > + ctx->resp_msg = NULL; > + return rc; > +} > + > +static int xgene_slimpro_i2c_xfer(struct i2c_adapter *adap, u16 addr, > + unsigned short flags, char read_write, > + u8 command, int size, > + union i2c_smbus_data *data) > +{ > + struct slimpro_i2c_dev *ctx = i2c_get_adapdata(adap); > + int ret = -EOPNOTSUPP; > + u32 val; > + > + switch (size) { > + case I2C_SMBUS_BYTE: > + if (read_write == I2C_SMBUS_READ) { > + ret = slimpro_i2c_rd(ctx, addr, 0, 0, > + SLIMPRO_IIC_SMB_PROTOCOL, > + BYTE_DATA, &val); > + data->byte = val; > + } else { > + ret = slimpro_i2c_wr(ctx, addr, command, SMBUS_CMD_LEN, > + SLIMPRO_IIC_SMB_PROTOCOL, > + 0, 0); > + } > + break; > + case I2C_SMBUS_BYTE_DATA: > + if (read_write == I2C_SMBUS_READ) { > + ret = slimpro_i2c_rd(ctx, addr, command, SMBUS_CMD_LEN, > + SLIMPRO_IIC_SMB_PROTOCOL, > + BYTE_DATA, &val); > + data->byte = val; > + } else { > + val = data->byte; > + ret = slimpro_i2c_wr(ctx, addr, command, SMBUS_CMD_LEN, > + SLIMPRO_IIC_SMB_PROTOCOL, > + BYTE_DATA, val); > + } > + break; > + case I2C_SMBUS_WORD_DATA: > + if (read_write == I2C_SMBUS_READ) { > + ret = slimpro_i2c_rd(ctx, addr, command, SMBUS_CMD_LEN, > + SLIMPRO_IIC_SMB_PROTOCOL, > + WORD_DATA, &val); > + data->word = val; > + } else { > + val = data->word; > + ret = slimpro_i2c_wr(ctx, addr, command, SMBUS_CMD_LEN, > + SLIMPRO_IIC_SMB_PROTOCOL, > + WORD_DATA, val); > + } > + break; > + case I2C_SMBUS_BLOCK_DATA: > + if (read_write == I2C_SMBUS_READ) { > + ret = slimpro_i2c_blkrd(ctx, addr, command, > + SMBUS_CMD_LEN, > + SLIMPRO_IIC_SMB_PROTOCOL, > + I2C_SMBUS_BLOCK_MAX + 1, > + IIC_SMB_WITH_DATA_LEN, > + &data->block[0]); > + > + } else { > + ret = slimpro_i2c_blkwr(ctx, addr, command, > + SMBUS_CMD_LEN, > + SLIMPRO_IIC_SMB_PROTOCOL, > + data->block[0] + 1, > + &data->block[0]); > + } > + break; > + case I2C_SMBUS_I2C_BLOCK_DATA: > + if (read_write == I2C_SMBUS_READ) { > + ret = slimpro_i2c_blkrd(ctx, addr, > + command, > + SMBUS_CMD_LEN, > + SLIMPRO_IIC_I2C_PROTOCOL, > + I2C_SMBUS_BLOCK_MAX, > + IIC_SMB_WITHOUT_DATA_LEN, > + &data->block[1]); > + } else { > + ret = slimpro_i2c_blkwr(ctx, addr, command, > + SMBUS_CMD_LEN, > + SLIMPRO_IIC_I2C_PROTOCOL, > + data->block[0], > + &data->block[1]); > + } > + break; > + default: > + break; > + } > + return ret; > +} > + > +/* > +* Return list of supported functionality. > +*/ > +static u32 xgene_slimpro_i2c_func(struct i2c_adapter *adapter) > +{ > + return I2C_FUNC_SMBUS_BYTE | > + I2C_FUNC_SMBUS_BYTE_DATA | > + I2C_FUNC_SMBUS_WORD_DATA | > + I2C_FUNC_SMBUS_BLOCK_DATA | > + I2C_FUNC_SMBUS_I2C_BLOCK; > +} > + > +static struct i2c_algorithm xgene_slimpro_i2c_algorithm = { > + .smbus_xfer = xgene_slimpro_i2c_xfer, > + .functionality = xgene_slimpro_i2c_func, > +}; > + > +static int __init xgene_slimpro_i2c_probe(struct platform_device *pdev) > +{ > + struct slimpro_i2c_dev *ctx; > + struct i2c_adapter *adapter; > + struct mbox_client *cl; > + int rc; > + > + ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); > + if (!ctx) > + return -ENOMEM; > + > + ctx->dev = &pdev->dev; > + platform_set_drvdata(pdev, ctx); > + cl = &ctx->mbox_client; > + > + /* Request mailbox channel */ > + cl->dev = &pdev->dev; > + cl->rx_callback = slimpro_i2c_rx_cb; > + cl->tx_block = true; > + init_completion(&ctx->rd_complete); > + cl->tx_tout = MAILBOX_OP_TIMEOUT; > + cl->knows_txdone = false; > + ctx->mbox_chan = mbox_request_channel(cl, MAILBOX_I2C_INDEX); > + if (IS_ERR(ctx->mbox_chan)) { > + dev_err(&pdev->dev, "i2c mailbox channel request failed\n"); > + return PTR_ERR(ctx->mbox_chan); > + } > + > + rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); > + if (rc) > + dev_warn(&pdev->dev, "Unable to set dma mask\n"); > + > + /* Setup I2C adapter */ > + adapter = &ctx->adapter; > + snprintf(adapter->name, sizeof(adapter->name), "MAILBOX I2C"); > + adapter->algo = &xgene_slimpro_i2c_algorithm; > + adapter->class = I2C_CLASS_HWMON; > + adapter->dev.parent = &pdev->dev; > + i2c_set_adapdata(adapter, ctx); > + rc = i2c_add_adapter(adapter); > + if (rc) { > + dev_err(&pdev->dev, "Adapter registeration failed\n"); > + return rc; > + } > + > + dev_info(&pdev->dev, "Mailbox I2C Adapter registered\n"); > + return 0; > +} > + > +static int xgene_slimpro_i2c_remove(struct platform_device *pdev) > +{ > + struct slimpro_i2c_dev *ctx = platform_get_drvdata(pdev); > + > + i2c_del_adapter(&ctx->adapter); > + > + mbox_free_channel(ctx->mbox_chan); > + > + return 0; > +} > + > +static const struct of_device_id xgene_slimpro_i2c_id[] = { > + {.compatible = "apm,xgene-slimpro-i2c" }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, xgene_slimpro_i2c_dt_ids); > + > +static struct platform_driver xgene_slimpro_i2c_driver = { > + .probe = xgene_slimpro_i2c_probe, > + .remove = xgene_slimpro_i2c_remove, > + .driver = { > + .name = "xgene-slimpro-i2c", > + .of_match_table = of_match_ptr(xgene_slimpro_i2c_id) > + }, > +}; > + > +module_platform_driver(xgene_slimpro_i2c_driver); > + > +MODULE_DESCRIPTION("APM X-Gene SLIMpro I2C driver"); > +MODULE_AUTHOR("Feng Kan <fkan@apm.com>"); > +MODULE_AUTHOR("Hieu Le <hnle@apm.com>"); > +MODULE_LICENSE("GPL"); > -- > 1.9.1 > ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH V4 2/4] i2c: busses: xgene: add acpi support for i2c xgene SLIMpro driver 2015-04-24 17:11 [PATCH V4 0/4] i2c: busses: xgene: I2C proxy driver for X-Gene Feng Kan 2015-04-24 17:11 ` [PATCH V4 1/4] i2c: busses: add SLIMpro I2C device driver on APM X-Gene platform Feng Kan @ 2015-04-24 17:11 ` Feng Kan 2015-04-24 17:11 ` [PATCH V4 3/4] Documentation: i2c: Add APM X-Gene platform SLIMpro I2C driver documentation Feng Kan 2015-04-24 17:11 ` [PATCH V4 4/4] arm64: dts: add proxy I2C device driver on APM X-Gene platform Feng Kan 3 siblings, 0 replies; 6+ messages in thread From: Feng Kan @ 2015-04-24 17:11 UTC (permalink / raw) To: patches, devicetree, linux-kernel, linux-acpi, linux-i2c; +Cc: Feng Kan This adds support for ACPI for the APM X-Gene I2C SLIMpro proxy driver. Signed-off-by: Feng Kan <fkan@apm.com> --- drivers/i2c/busses/i2c-xgene-slimpro.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-xgene-slimpro.c b/drivers/i2c/busses/i2c-xgene-slimpro.c index afe4cf2..f1caa29 100644 --- a/drivers/i2c/busses/i2c-xgene-slimpro.c +++ b/drivers/i2c/busses/i2c-xgene-slimpro.c @@ -22,6 +22,7 @@ * using the APM X-Gene SLIMpro mailbox driver. * */ +#include <linux/acpi.h> #include <linux/dma-mapping.h> #include <linux/i2c.h> #include <linux/interrupt.h> @@ -442,12 +443,21 @@ static const struct of_device_id xgene_slimpro_i2c_id[] = { }; MODULE_DEVICE_TABLE(of, xgene_slimpro_i2c_dt_ids); +#ifdef CONFIG_ACPI +static const struct acpi_device_id xgene_slimpro_i2c_acpi_ids[] = { + {"APMC0D40", 0}, + {} +}; +MODULE_DEVICE_TABLE(acpi, slimpro_acpi_ids); +#endif + static struct platform_driver xgene_slimpro_i2c_driver = { .probe = xgene_slimpro_i2c_probe, .remove = xgene_slimpro_i2c_remove, .driver = { .name = "xgene-slimpro-i2c", - .of_match_table = of_match_ptr(xgene_slimpro_i2c_id) + .of_match_table = of_match_ptr(xgene_slimpro_i2c_id), + .acpi_match_table = ACPI_PTR(xgene_slimpro_i2c_acpi_ids) }, }; -- 1.9.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH V4 3/4] Documentation: i2c: Add APM X-Gene platform SLIMpro I2C driver documentation 2015-04-24 17:11 [PATCH V4 0/4] i2c: busses: xgene: I2C proxy driver for X-Gene Feng Kan 2015-04-24 17:11 ` [PATCH V4 1/4] i2c: busses: add SLIMpro I2C device driver on APM X-Gene platform Feng Kan 2015-04-24 17:11 ` [PATCH V4 2/4] i2c: busses: xgene: add acpi support for i2c xgene SLIMpro driver Feng Kan @ 2015-04-24 17:11 ` Feng Kan 2015-04-24 17:11 ` [PATCH V4 4/4] arm64: dts: add proxy I2C device driver on APM X-Gene platform Feng Kan 3 siblings, 0 replies; 6+ messages in thread From: Feng Kan @ 2015-04-24 17:11 UTC (permalink / raw) To: patches, devicetree, linux-kernel, linux-acpi, linux-i2c Cc: Feng Kan, Hieu Le Add APM X-Gene platform SLIMpro I2C driver documentation. Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Hieu Le <hnle@apm.com> --- .../devicetree/bindings/i2c/i2c-xgene-slimpro.txt | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt diff --git a/Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt b/Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt new file mode 100644 index 0000000..f6b2c20 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt @@ -0,0 +1,15 @@ +APM X-Gene SLIMpro Mailbox I2C Driver + +An I2C controller accessed over the "SLIMpro" mailbox. + +Required properties : + + - compatible : should be "apm,xgene-slimpro-i2c" + - mboxes : use the label reference for the mailbox as the first parameter. + The second parameter is the channel number. + +Example : + i2cslimpro { + compatible = "apm,xgene-slimpro-i2c"; + mboxes = <&mailbox 0>; + }; -- 1.9.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH V4 4/4] arm64: dts: add proxy I2C device driver on APM X-Gene platform 2015-04-24 17:11 [PATCH V4 0/4] i2c: busses: xgene: I2C proxy driver for X-Gene Feng Kan ` (2 preceding siblings ...) 2015-04-24 17:11 ` [PATCH V4 3/4] Documentation: i2c: Add APM X-Gene platform SLIMpro I2C driver documentation Feng Kan @ 2015-04-24 17:11 ` Feng Kan 3 siblings, 0 replies; 6+ messages in thread From: Feng Kan @ 2015-04-24 17:11 UTC (permalink / raw) To: patches, devicetree, linux-kernel, linux-acpi, linux-i2c Cc: Feng Kan, Hieu Le Add proxy I2C device driver on APM X-Gene platform. Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Hieu Le <hnle@apm.com> --- arch/arm64/boot/dts/apm/apm-storm.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi index a2b9657..d405dd0 100644 --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -522,6 +522,11 @@ <0x0 0x7 0x4>; }; + i2cslimpro { + compatible = "apm,xgene-slimpro-i2c"; + mboxes = <&mailbox 0>; + }; + serial0: serial@1c020000 { status = "disabled"; device_type = "serial"; -- 1.9.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-04-24 18:13 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-04-24 17:11 [PATCH V4 0/4] i2c: busses: xgene: I2C proxy driver for X-Gene Feng Kan 2015-04-24 17:11 ` [PATCH V4 1/4] i2c: busses: add SLIMpro I2C device driver on APM X-Gene platform Feng Kan 2015-04-24 18:13 ` Feng Kan 2015-04-24 17:11 ` [PATCH V4 2/4] i2c: busses: xgene: add acpi support for i2c xgene SLIMpro driver Feng Kan 2015-04-24 17:11 ` [PATCH V4 3/4] Documentation: i2c: Add APM X-Gene platform SLIMpro I2C driver documentation Feng Kan 2015-04-24 17:11 ` [PATCH V4 4/4] arm64: dts: add proxy I2C device driver on APM X-Gene platform Feng Kan
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).