From: Richard Genoud <richard.genoud@gmail.com>
To: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Richard Genoud <richard.genoud@gmail.com>
Subject: [PATCH] ARM: sunxi: dts: Add A10 uarts pin muxing options
Date: Sun, 26 Apr 2015 12:15:38 +0200 [thread overview]
Message-ID: <1430043338-28982-1-git-send-email-richard.genoud@gmail.com> (raw)
The A10 has 8 uarts, only uart0 and uart1 where filled.
This patch adds all the missing uarts(2 to 7) pin muxing to the dtsi.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
---
arch/arm/boot/dts/sun4i-a10.dtsi | 84 ++++++++++++++++++++++++++++++++++++++
1 file changed, 84 insertions(+)
Based on V4.0
uart4_a tested on cubieboard A10
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index eebb785..e83fd2c 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -673,6 +673,90 @@
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+ uart2_pins_a: uart2@0 {
+ allwinner,pins = "PA2", "PA3";
+ allwinner,function = "uart2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ uart2_pins_b: uart2@1 {
+ allwinner,pins = "PI18", "PI19";
+ allwinner,function = "uart2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ uart3_pins_a: uart3@0 {
+ allwinner,pins = "PG6", "PG7";
+ allwinner,function = "uart3";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ uart3_pins_b: uart3@1 {
+ allwinner,pins = "PH0", "PH1";
+ allwinner,function = "uart3";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ uart4_pins_a: uart4@0 {
+ allwinner,pins = "PG10", "PG11";
+ allwinner,function = "uart4";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ uart4_pins_b: uart4@1 {
+ allwinner,pins = "PH4", "PH5";
+ allwinner,function = "uart4";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ uart5_pins_a: uart5@0 {
+ allwinner,pins = "PH6", "PH7";
+ allwinner,function = "uart5";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ uart5_pins_b: uart5@1 {
+ allwinner,pins = "PI10", "PI11";
+ allwinner,function = "uart5";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ uart6_pins_a: uart6@0 {
+ allwinner,pins = "PA12", "PA13";
+ allwinner,function = "uart6";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ uart6_pins_b: uart6@1 {
+ allwinner,pins = "PI12", "PI13";
+ allwinner,function = "uart6";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ uart7_pins_a: uart7@0 {
+ allwinner,pins = "PA14", "PA15";
+ allwinner,function = "uart7";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ uart7_pins_b: uart7@1 {
+ allwinner,pins = "PI20", "PI21";
+ allwinner,function = "uart7";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PB0", "PB1";
allwinner,function = "i2c0";
--
1.7.10.4
next reply other threads:[~2015-04-26 10:15 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-26 10:15 Richard Genoud [this message]
2015-04-26 16:11 ` [PATCH] ARM: sunxi: dts: Add A10 uarts pin muxing options Maxime Ripard
2015-04-27 6:36 ` Richard Genoud
2015-04-27 9:52 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430043338-28982-1-git-send-email-richard.genoud@gmail.com \
--to=richard.genoud@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime.ripard@free-electrons.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).