[PATCH V7 6/9] mailbox: Add NVIDIA Tegra XUSB mailbox binding

[Andrew Bresticker <abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>]

Add device-tree bindings for the Tegra XUSB mailbox which will be used
for communication between the Tegra xHCI controller's firmware and the
host processor.

Signed-off-by: Andrew Bresticker <abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
Cc: Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Cc: Jassi Brar <jassisinghbrar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
Changes from v6:
 - Removed reg/interrupts properties.
No changes from v3/v4/v5.
Changes from v2:
 - Dropped channel specifier.
 - Added pointer to mailbox documentation.
Changes from v1:
 - Updated to use common mailbox bindings.
---
 .../bindings/mailbox/nvidia,tegra124-xusb-mbox.txt | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/nvidia,tegra124-xusb-mbox.txt

diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra124-xusb-mbox.txt b/Documentation/devicetree/bindings/mailbox/nvidia,tegra124-xusb-mbox.txt
new file mode 100644
index 0000000..9d89afa
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/nvidia,tegra124-xusb-mbox.txt
@@ -0,0 +1,30 @@
+NVIDIA Tegra XUSB mailbox
+=========================
+
+The Tegra XUSB mailbox is used by the Tegra xHCI controller's firmware to
+communicate requests to the host and PHY drivers.
+
+Refer to ./mailbox.txt for generic information about mailbox device-tree
+bindings.
+
+Required properties:
+--------------------
+ - compatible: For Tegra124, must contain "nvidia,tegra124-xusb-mbox".
+   Otherwise, must contain '"nvidia,<chip>-xusb-mbox",
+   "nvidia,tegra124-xusb-mbox"' where <chip> is tegra132.
+ - #mbox-cells: Should be 0.  There is only one physical channel.
+
+Example:
+--------
+	mailbox {
+		compatible = "nvidia,tegra124-xusb-mbox";
+
+		#mbox-cells = <0>;
+	};
+
+	usb-host {
+		...
+		mboxes = <&xusb_mbox>;
+		mbox-names = "xusb";
+		...
+	};
-- 
2.2.0.rc0.207.ga3a616c