From mboxrd@z Thu Jan 1 00:00:00 1970 From: Subject: [PATCH 1/2] Documentation: Add Netlogic XLP GPIO devicetree bindings documentation Date: Tue, 28 Apr 2015 20:10:44 +0530 Message-ID: <1430232045-5114-2-git-send-email-kamlakant.patel@broadcom.com> References: <1430232045-5114-1-git-send-email-kamlakant.patel@broadcom.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1430232045-5114-1-git-send-email-kamlakant.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Linus Walleij Cc: Kamlakant Patel , Alexandre Courbot , linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org From: Kamlakant Patel Provide documentation for Netlogic XLP SoCs GPIO controller DTS bindings. Signed-off-by: Kamlakant Patel --- .../devicetree/bindings/gpio/gpio-xlp.txt | 47 ++++++++++++++++++++ 1 files changed, 47 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-xlp.txt diff --git a/Documentation/devicetree/bindings/gpio/gpio-xlp.txt b/Documentation/devicetree/bindings/gpio/gpio-xlp.txt new file mode 100644 index 0000000..262ee4d --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-xlp.txt @@ -0,0 +1,47 @@ +Netlogic XLP Family GPIO +======================== + +This GPIO driver is used for following Netlogic XLP SoCs: + XLP832, XLP316, XLP208, XLP980, XLP532 + +Required properties: +------------------- + +- compatible: Should be one of the following: + - "netlogic,xlp832-gpio": For Netlogic XLP832 + - "netlogic,xlp316-gpio": For Netlogic XLP316 + - "netlogic,xlp208-gpio": For Netlogic XLP208 + - "netlogic,xlp980-gpio": For Netlogic XLP980 + - "netlogic,xlp532-gpio": For Netlogic XLP532 +- reg: Physical base address and length of the controller's registers. +- #gpio-cells: Should be two. The first cell is the pin number and the second + cell is used to specify optional parameters (currently unused). +- gpio-controller: Marks the device node as a GPIO controller. +- nr-gpios: Number of GPIO pins supported by the controller. +- interrupt-cells: Should be two. The first cell is the GPIO Number. The + second cell is used to specify flags. The following subset of flags is + supported: + - trigger type: + 1 = low to high edge triggered. + 2 = high to low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. +- interrupts: Interrupt number for this device. +- interrupt-parent: phandle of the parent interrupt controller. +- interrupt-controller: Identifies the node as an interrupt controller. + +Example: + + gpio: xlp_gpio@34000 { + compatible = "netlogic,xlp316-gpio"; + reg = <0 0x34100 0x1000 + 0 0x35100 0x1000>; + #gpio-cells = <2>; + gpio-controller; + nr-gpios = <57>; + + #interrupt-cells = <2>; + interrupt-parent = <&pic>; + interrupts = <39>; + interrupt-controller; + }; -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html