devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Inha Song <ideal.song@samsung.com>
To: lee.jones@linaro.org
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
	linux-kernel@vger.kernel.org,
	patches@opensource.wolfsonmicro.com, cw00.choi@samsung.com,
	broonie@kernel.org, ckeepax@opensource.wolfsonmicro.com,
	rf@opensource.wolfsonmicro.com, robh+dt@kernel.org,
	pawel.moll@arm.com, mark.rutland@arm.com,
	ijc+devicetree@hellion.org.uk, Inha Song <ideal.song@samsung.com>
Subject: [alsa-devel] [PATCH v4 1/2] extcon: arizona: Add support for select accessory detect mode when headphone detection
Date: Thu, 30 Apr 2015 10:37:57 +0900	[thread overview]
Message-ID: <1430357878-22859-2-git-send-email-ideal.song@samsung.com> (raw)
In-Reply-To: <1430357878-22859-1-git-send-email-ideal.song@samsung.com>

This patch add support for select accessory detect mode to HPDETL or HPDETR.
Arizona provides a headphone detection circuit on the HPDETL and HPDETR pins
to measure the impedance of an external load connected to the headphone.

Depending on board design, headphone detect pins can change to HPDETR or HPDETL.

Signed-off-by: Inha Song <ideal.song@samsung.com>
---
 drivers/extcon/extcon-arizona.c   | 38 ++++++++++++++++++++++++++++++--------
 include/dt-bindings/mfd/arizona.h |  8 ++++++++
 include/linux/mfd/arizona/pdata.h |  3 +++
 3 files changed, 41 insertions(+), 8 deletions(-)
 create mode 100644 include/dt-bindings/mfd/arizona.h

diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 63f01c4..d251e92 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -32,13 +32,10 @@
 #include <linux/mfd/arizona/core.h>
 #include <linux/mfd/arizona/pdata.h>
 #include <linux/mfd/arizona/registers.h>
+#include <dt-bindings/mfd/arizona.h>
 
 #define ARIZONA_MAX_MICD_RANGE 8
 
-#define ARIZONA_ACCDET_MODE_MIC 0
-#define ARIZONA_ACCDET_MODE_HPL 1
-#define ARIZONA_ACCDET_MODE_HPR 2
-
 #define ARIZONA_MICD_CLAMP_MODE_JDL      0x4
 #define ARIZONA_MICD_CLAMP_MODE_JDH      0x5
 #define ARIZONA_MICD_CLAMP_MODE_JDL_GP5H 0x9
@@ -653,9 +650,9 @@ static void arizona_identify_headphone(struct arizona_extcon_info *info)
 	ret = regmap_update_bits(arizona->regmap,
 				 ARIZONA_ACCESSORY_DETECT_MODE_1,
 				 ARIZONA_ACCDET_MODE_MASK,
-				 ARIZONA_ACCDET_MODE_HPL);
+				 arizona->pdata.hpdet_channel);
 	if (ret != 0) {
-		dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
+		dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret);
 		goto err;
 	}
 
@@ -705,9 +702,9 @@ static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
 				 ARIZONA_ACCESSORY_DETECT_MODE_1,
 				 ARIZONA_ACCDET_SRC | ARIZONA_ACCDET_MODE_MASK,
 				 info->micd_modes[0].src |
-				 ARIZONA_ACCDET_MODE_HPL);
+				 arizona->pdata.hpdet_channel);
 	if (ret != 0) {
-		dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
+		dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret);
 		goto err;
 	}
 
@@ -1103,6 +1100,26 @@ static void arizona_micd_set_level(struct arizona *arizona, int index,
 	regmap_update_bits(arizona->regmap, reg, mask, level);
 }
 
+static int arizona_extcon_of_get_pdata(struct arizona *arizona)
+{
+	struct arizona_pdata *pdata = &arizona->pdata;
+	unsigned int val = ARIZONA_ACCDET_MODE_HPL;
+
+	of_property_read_u32(arizona->dev->of_node, "wlf,hpdet-channel", &val);
+	switch (val) {
+	case ARIZONA_ACCDET_MODE_HPL:
+	case ARIZONA_ACCDET_MODE_HPR:
+		pdata->hpdet_channel = val;
+		break;
+	default:
+		dev_err(arizona->dev,
+			"Wrong wlf,hpdet-channel DT value %d\n", val);
+		pdata->hpdet_channel = ARIZONA_ACCDET_MODE_HPL;
+	}
+
+	return 0;
+}
+
 static int arizona_extcon_probe(struct platform_device *pdev)
 {
 	struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
@@ -1120,6 +1137,11 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 	if (!info)
 		return -ENOMEM;
 
+	if (IS_ENABLED(CONFIG_OF)) {
+		if (!dev_get_platdata(arizona->dev))
+			arizona_extcon_of_get_pdata(arizona);
+	}
+
 	info->micvdd = devm_regulator_get(&pdev->dev, "MICVDD");
 	if (IS_ERR(info->micvdd)) {
 		ret = PTR_ERR(info->micvdd);
diff --git a/include/dt-bindings/mfd/arizona.h b/include/dt-bindings/mfd/arizona.h
new file mode 100644
index 0000000..9ecff78
--- /dev/null
+++ b/include/dt-bindings/mfd/arizona.h
@@ -0,0 +1,8 @@
+#ifndef __DT_BINDINGS_ARIZONA_H__
+#define __DT_BINDINGS_ARIZONA_H__
+
+#define ARIZONA_ACCDET_MODE_MIC 0
+#define ARIZONA_ACCDET_MODE_HPL 1
+#define ARIZONA_ACCDET_MODE_HPR 2
+
+#endif /* __DT_BINDINGS_ARIZONA_H__ */
diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h
index 4578c72..2473a67 100644
--- a/include/linux/mfd/arizona/pdata.h
+++ b/include/linux/mfd/arizona/pdata.h
@@ -139,6 +139,9 @@ struct arizona_pdata {
 	/** GPIO used for mic isolation with HPDET */
 	int hpdet_id_gpio;
 
+	/** Channel to use for headphone detection */
+	unsigned int hpdet_channel;
+
 	/** Extra debounce timeout used during initial mic detection (ms) */
 	int micd_detect_debounce;
 
-- 
2.0.0.390.gcb682f8

  reply	other threads:[~2015-04-30  1:37 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-30  1:37 [alsa-devel] [PATCH v4 0/2] Add support for select accessory detect mode to HPDETL or HPDETR Inha Song
2015-04-30  1:37 ` Inha Song [this message]
     [not found]   ` <1430357878-22859-2-git-send-email-ideal.song-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-04-30  9:32     ` [alsa-devel] [PATCH v4 1/2] extcon: arizona: Add support for select accessory detect mode when headphone detection Charles Keepax
2015-04-30 10:16   ` Chanwoo Choi
2015-04-30 10:16   ` Lee Jones
2015-04-30  1:37 ` [alsa-devel] [PATCH v4 2/2] mfd: arizona: Update DT binding to support hpdet channel Inha Song
     [not found]   ` <1430357878-22859-3-git-send-email-ideal.song-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-04-30  9:32     ` Charles Keepax
2015-04-30 10:09   ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1430357878-22859-2-git-send-email-ideal.song@samsung.com \
    --to=ideal.song@samsung.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=ckeepax@opensource.wolfsonmicro.com \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=patches@opensource.wolfsonmicro.com \
    --cc=pawel.moll@arm.com \
    --cc=rf@opensource.wolfsonmicro.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).