[PATCH v3 0/6] Add dwc3 usb3 DT node and various phy cleanup

[Peter Griffin <peter.griffin@linaro.org>]

Hi Maxime,

This series primarily adds the dwc3 DT node which activates the usb3 controller on
the stih407-b2120, stih410-b2120 and stih418-b2199 platforms.

As part of getting this working I noticed an error with the picophyreset which 
stops the controller working which I've also fixed.

regards,

Peter.

Changes in v3:
- Add miphys8lp options properties for stih418 (Pete)
- Add support for stih418-b2199 (Max)
- Only enable usb3 controller in the board file (Max)
- Fix superflous '\n' (Lee)
- Rebase series on v4.1-rc1 (Pete)

NB: Since v2 some patches were taken into the phy and ahci trees which I've now
removed from the series.

Changes in v2:
- Update commit to explicitly say no ABI breakage (Rob)
- Rebase series on v4.0-rc6 (Pete)
- Collect up Acks (Pete)

Peter Griffin (6):
  ARM: DT: STi: STiH407: Update picophyreset for the usb3 controllers
    usb2 phy
  ARM: DT: STi: STiH407: Add dwc3 usb3 DT node.
  usb: dwc3: dwc3-st: Update the incorrect DT dwc3 example.
  ARM: DT: STi: stihxxx-b2120: Enable USB3 port on stih407-b2120 and
    stih410-b2120
  ARM: DT: STi: STiH418: Add miphy28lp optional oscillator clock
    properties
  ARM: DT: STi: STiH418: Enable USB3 port on stih418-b2199.

 Documentation/devicetree/bindings/usb/dwc3-st.txt |  7 +++---
 arch/arm/boot/dts/stih407-family.dtsi             | 30 ++++++++++++++++++++++-
 arch/arm/boot/dts/stih418-b2199.dts               | 15 ++++++++++++
 arch/arm/boot/dts/stihxxx-b2120.dtsi              |  5 ++++
 4 files changed, 52 insertions(+), 5 deletions(-)

-- 
1.9.1