From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joachim Eastwood Subject: [PATCH v3 0/2] reset driver for NXP LPC18xx family Date: Wed, 6 May 2015 00:10:25 +0200 Message-ID: <1430863827-21898-1-git-send-email-manabian@gmail.com> Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Joachim Eastwood List-Id: devicetree@vger.kernel.org This patch set adds a reset driver for NXP LPC18xx/43xx devices. Changes in v3: * add patch descriptions * change parameter name in to_rgu_data macro to avoid a potential issue if code is changed. Changes in v2: * clean up header includes * prefix M0 reset defines with LPC43XX * fix comment about M0 reset lines * reorganize reset call chains * add reset number table to dt doc There are no dependencies in this patch set. The DTS changes will be sent separately to arm-soc once this patch set goes upstream. Base support for the NXP LPC18xx family can be found here: http://marc.info/?l=linux-arm-kernel&m=143016894704253&w=2 Joachim Eastwood (2): reset: add driver for lpc18xx rgu doc: dt: add documentation for lpc1850-rgu reset driver .../devicetree/bindings/reset/nxp,lpc1850-rgu.txt | 84 +++++++ drivers/reset/Makefile | 1 + drivers/reset/reset-lpc18xx.c | 258 +++++++++++++++++++++ 3 files changed, 343 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt create mode 100644 drivers/reset/reset-lpc18xx.c -- 1.8.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html