From: Brian Norris <computersforpeace@gmail.com>
To: linux-mtd@lists.infradead.org
Cc: "Brian Norris" <computersforpeace@gmail.com>,
"Dmitry Torokhov" <dtor@google.com>,
"Anatol Pomazao" <anatol@google.com>,
"Ray Jui" <rjui@broadcom.com>,
"Corneliu Doban" <cdoban@broadcom.com>,
"Jonathan Richardson" <jonathar@broadcom.com>,
"Scott Branden" <sbranden@broadcom.com>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Rafał Miłecki" <zajec5@gmail.com>,
bcm-kernel-feedback-list@broadcom.com,
"Dan Ehrenberg" <dehrenberg@chromium.org>,
"Gregory Fong" <gregory.0xf0@gmail.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
"Kevin Cernekee" <cernekee@gmail.com>
Subject: [PATCH v3 00/10] mtd: nand: add Broadcom NAND controller support
Date: Wed, 6 May 2015 10:59:44 -0700 [thread overview]
Message-ID: <1430935194-7579-1-git-send-email-computersforpeace@gmail.com> (raw)
Hi,
This is version 3 of support for the Broadcom BCM7xxx Set-Top Box NAND
controller. This controller has been used in a variety of Broadcom SoCs.
This series now adds support for a few new chips: BCM63138, and the iProc chip
family. These add an additional 6 new patches to the original 4. If the only
comments end up on the latter 6 patches, the first 4 might be worth merging
independently.
Summary changelog:
v1 -> v2:
* add NAND to DTS for BCM7445 / BCM97445SVMB
* rename DT binding file to have 'brcm,' prefix
* catch DMA mapping errors
* fixup timeout / error messages (hex, remove misleading info)
* MODULE_LICENSE("GPL v2")
* fix incorrect comments
* print why we fail, when checking for supported controller revisions
* disable prefetch when using Flash DMA (see FIXME); will re-enable once we
get a good erased-page verification scheme merged
v2 -> v3:
* rebase to v4.1-rc1
* add SoC-specific infrastructure, to help support other SoCs:
- add BCM63138 support
- add iProc/Cygnus support
* disable prefetch on v6.1
Brian Norris (8):
mtd: nand: add common DT init code
Documentation: devicetree: add binding doc for Broadcom NAND
controller
mtd: nand: add NAND driver for Broadcom STB NAND controller
ARM: bcm7445: add NAND to DTS
Documentation: devicetree: brcmstb_nand: add 'brcm,nand-soc' bindings
mtd: brcmstb_nand: add SoC-specific support
mtd: brcsmtb_nand_soc: add support for BCM63138
ARM: bcm63138: add NAND DT support
Ray Jui (2):
mtd: brcsmtb_nand_soc: add iProc support
ARM: dts: cygnus: Enable NAND support for Cygnus
.../devicetree/bindings/mtd/brcm,brcmstb-nand.txt | 147 ++
arch/arm/boot/dts/bcm-cygnus.dtsi | 20 +
arch/arm/boot/dts/bcm63138.dtsi | 17 +
arch/arm/boot/dts/bcm7445-bcm97445svmb.dts | 23 +
arch/arm/boot/dts/bcm7445.dtsi | 22 +
arch/arm/boot/dts/bcm958300k.dts | 16 +
arch/arm/boot/dts/bcm963138dvt.dts | 12 +
drivers/mtd/nand/Kconfig | 8 +
drivers/mtd/nand/Makefile | 2 +
drivers/mtd/nand/brcmnand.h | 56 +
drivers/mtd/nand/brcmstb_nand.c | 2263 ++++++++++++++++++++
drivers/mtd/nand/brcmstb_nand_soc.c | 244 +++
drivers/mtd/nand/nand_base.c | 41 +
include/linux/mtd/nand.h | 5 +
14 files changed, 2876 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/brcm,brcmstb-nand.txt
create mode 100644 drivers/mtd/nand/brcmnand.h
create mode 100644 drivers/mtd/nand/brcmstb_nand.c
create mode 100644 drivers/mtd/nand/brcmstb_nand_soc.c
--
1.9.1
next reply other threads:[~2015-05-06 17:59 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-06 17:59 Brian Norris [this message]
2015-05-06 17:59 ` [PATCH v3 01/10] mtd: nand: add common DT init code Brian Norris
2015-05-11 23:25 ` Brian Norris
2015-05-06 17:59 ` [PATCH v3 02/10] Documentation: devicetree: add binding doc for Broadcom NAND controller Brian Norris
2015-05-06 17:59 ` [PATCH v3 03/10] mtd: nand: add NAND driver for Broadcom STB " Brian Norris
2015-05-06 19:17 ` Arnd Bergmann
2015-05-06 21:05 ` Brian Norris
2015-05-06 21:18 ` Ray Jui
2015-05-07 9:25 ` Arnd Bergmann
2015-05-07 18:52 ` Brian Norris
2015-05-08 8:18 ` Arnd Bergmann
2015-05-08 2:01 ` Brian Norris
2015-05-08 8:19 ` Arnd Bergmann
2015-05-06 17:59 ` [PATCH v3 04/10] ARM: bcm7445: add NAND to DTS Brian Norris
2015-05-06 17:59 ` [PATCH v3 05/10] Documentation: devicetree: brcmstb_nand: add 'brcm,nand-soc' bindings Brian Norris
2015-05-06 17:59 ` [PATCH v3 06/10] mtd: brcmstb_nand: add SoC-specific support Brian Norris
2015-05-06 19:12 ` Arnd Bergmann
2015-05-06 20:49 ` Brian Norris
2015-05-06 21:00 ` nick
2015-05-07 10:01 ` Arnd Bergmann
2015-05-07 18:42 ` Brian Norris
2015-05-07 18:48 ` Ray Jui
2015-05-08 13:41 ` Arnd Bergmann
2015-05-08 19:38 ` Brian Norris
2015-05-08 19:49 ` Arnd Bergmann
2015-05-08 20:47 ` Brian Norris
2015-05-08 21:38 ` Arnd Bergmann
2015-05-08 21:49 ` Brian Norris
2015-05-08 21:58 ` Ray Jui
2015-05-07 18:51 ` Florian Fainelli
2015-05-06 17:59 ` [PATCH v3 07/10] mtd: brcsmtb_nand_soc: add support for BCM63138 Brian Norris
2015-05-06 17:59 ` [PATCH v3 08/10] mtd: brcsmtb_nand_soc: add iProc support Brian Norris
[not found] ` <1430935194-7579-1-git-send-email-computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-05-06 17:59 ` [PATCH v3 09/10] ARM: bcm63138: add NAND DT support Brian Norris
2015-05-06 17:59 ` [PATCH v3 10/10] ARM: dts: cygnus: Enable NAND support for Cygnus Brian Norris
2015-05-06 21:31 ` [PATCH v3 00/10] mtd: nand: add Broadcom NAND controller support Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430935194-7579-1-git-send-email-computersforpeace@gmail.com \
--to=computersforpeace@gmail.com \
--cc=anatol@google.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=cdoban@broadcom.com \
--cc=cernekee@gmail.com \
--cc=dehrenberg@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=dtor@google.com \
--cc=f.fainelli@gmail.com \
--cc=gregory.0xf0@gmail.com \
--cc=jonathar@broadcom.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=rjui@broadcom.com \
--cc=sbranden@broadcom.com \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).