From mboxrd@z Thu Jan 1 00:00:00 1970 From: Philipp Zabel Subject: Re: [PATCH v3 0/2] reset driver for NXP LPC18xx family Date: Thu, 07 May 2015 15:01:05 +0200 Message-ID: <1431003665.3014.36.camel@pengutronix.de> References: <1430863827-21898-1-git-send-email-manabian@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1430863827-21898-1-git-send-email-manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Joachim Eastwood Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org Am Mittwoch, den 06.05.2015, 00:10 +0200 schrieb Joachim Eastwood: > This patch set adds a reset driver for NXP LPC18xx/43xx devices. > > Changes in v3: > * add patch descriptions > * change parameter name in to_rgu_data macro to avoid a potential > issue if code is changed. > > Changes in v2: > * clean up header includes > * prefix M0 reset defines with LPC43XX > * fix comment about M0 reset lines > * reorganize reset call chains > * add reset number table to dt doc > > There are no dependencies in this patch set. The DTS changes will > be sent separately to arm-soc once this patch set goes upstream. > > Base support for the NXP LPC18xx family can be found here: > http://marc.info/?l=linux-arm-kernel&m=143016894704253&w=2 > > Joachim Eastwood (2): > reset: add driver for lpc18xx rgu > doc: dt: add documentation for lpc1850-rgu reset driver Applied both, thanks. regards Philipp -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html