From: <Frank.Li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
To: lznuaa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Frank Li <Frank.Li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Subject: [PATCH V8 0/6] Add Freescale i.mx7d support
Date: Fri, 8 May 2015 01:35:52 +0800 [thread overview]
Message-ID: <1431020158-13789-1-git-send-email-Frank.Li@freescale.com> (raw)
From: Frank Li <Frank.Li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Add basic support for chip imx7d.
- MSL
- Clock support. All clock enabled.
- pinctrl support
- SD Card support
Change from v7 to v8
- exclude patchs already accepted.
- Remove SOC_IMX7
- Remove static map
- Remove #include <linux/phy.h>
- Remove .restart = mxc_restart,
- Remove mx7d.h
- consistent indetation in imx7d.dtsi
- Change document remove "ipp_di0" and "ipp_di1"
- Remove GPC because needn't it now, will added back at SMP enable patch
- Remove imx21-uart compatible string
- use i.mx6sx timer compatible string, so remove time.c change
- correct typo imx6sx
- dt file add cpu1
Change from v6 to v7
- Move clk to driver/clk/imx
- Remove iomux-lpsr part
- Remove parents clocks node in imx7d.dtsi
Change from v5 to v6
- dual license for dts
- fix typo statue
- Remove smp_operations
- Remove GPT check cpu_is_mx7() by use old compatible mode
- Remove dts arch_timer part, which not used in this patch series
- correct GIC reg map
Change from v4 to v5
- Remove imx7d_map_io()
- Remove clk_register_clkdev(clks[IMX7D_GPT1_ROOT_CLK], "ipg", "imx-gpt.0");
- Remove clk_register_clkdev(clks[IMX7D_GPT_3M_CLK], "gpt_3m", "imx-gpt.0");
- Add comment about enable all clock
- Add Type IMX_PLLV3_ENET_IMX7 and remove cpu_is_imx7d()
Change from v3 to v4
- Fixed the problem review by Russel king.
Remove __mxc_arch_type
Remove MXC_ARCH_CA7
use new smp_operation for ca7 platform
- imx7d.dtsi remove unecessary part for bring up
- imx7d-sdb.dsi, just enable uart i2c and sd card
- Add device tree binding document for timer, clock and pinctrl
Change from v2 to v3
- remove unsupport part in imx7d-sdb.dtb
Change from V1 to V2:
- split patch1 to three small one to avoid 100k maillist limitation.
- fix imx7d.dtsi code style problem
Anson Huang (1):
ARM: imx: add msl support for imx7d
Frank Li (5):
Document: dt: binding: imx: update document for imx7d support
ARM: dts: add imx7d soc dtsi file
ARM: imx: add imx7d clk tree support
arm: dts: add imx7d-sdb support
ARM: config: imx_v6_v7_defconfig add imx7d support
.../devicetree/bindings/clock/imx7d-clock.txt | 13 +
.../bindings/pinctrl/fsl,imx7d-pinctrl.txt | 27 +
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/imx7d-sdb.dts | 420 ++++++++++
arch/arm/boot/dts/imx7d.dtsi | 486 +++++++++++
arch/arm/configs/imx_v6_v7_defconfig | 1 +
arch/arm/mach-imx/Kconfig | 7 +
arch/arm/mach-imx/Makefile | 1 +
arch/arm/mach-imx/anatop.c | 5 +-
arch/arm/mach-imx/cpu.c | 3 +
arch/arm/mach-imx/mach-imx7d.c | 43 +
arch/arm/mach-imx/mxc.h | 8 +-
drivers/clk/imx/Makefile | 1 +
drivers/clk/imx/clk-imx7d.c | 886 +++++++++++++++++++++
drivers/clk/imx/clk-pllv3.c | 14 +-
drivers/clk/imx/clk.h | 9 +
include/dt-bindings/clock/imx7d-clock.h | 450 +++++++++++
17 files changed, 2373 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/imx7d-clock.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
create mode 100644 arch/arm/boot/dts/imx7d-sdb.dts
create mode 100644 arch/arm/boot/dts/imx7d.dtsi
create mode 100644 arch/arm/mach-imx/mach-imx7d.c
create mode 100644 drivers/clk/imx/clk-imx7d.c
create mode 100644 include/dt-bindings/clock/imx7d-clock.h
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2015-05-07 17:35 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-07 17:35 Frank.Li-KZfg59tc24xl57MIdRCFDg [this message]
[not found] ` <1431020158-13789-1-git-send-email-Frank.Li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-05-07 17:35 ` [PATCH V8 1/6] Document: dt: binding: imx: update document for imx7d support Frank.Li-KZfg59tc24xl57MIdRCFDg
[not found] ` <1431020158-13789-2-git-send-email-Frank.Li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-05-11 13:58 ` Shawn Guo
2015-05-07 17:35 ` [PATCH V8 2/6] ARM: dts: add imx7d soc dtsi file Frank.Li-KZfg59tc24xl57MIdRCFDg
[not found] ` <1431020158-13789-3-git-send-email-Frank.Li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-05-11 13:51 ` Shawn Guo
2015-05-07 17:35 ` [PATCH V8 3/6] ARM: imx: add msl support for imx7d Frank.Li-KZfg59tc24xl57MIdRCFDg
[not found] ` <1431020158-13789-4-git-send-email-Frank.Li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-05-11 13:59 ` Shawn Guo
2015-05-07 17:35 ` [PATCH V8 4/6] ARM: imx: add imx7d clk tree support Frank.Li-KZfg59tc24xl57MIdRCFDg
[not found] ` <1431020158-13789-5-git-send-email-Frank.Li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-05-11 14:20 ` Shawn Guo
2015-05-07 17:35 ` [PATCH V8 5/6] arm: dts: add imx7d-sdb support Frank.Li-KZfg59tc24xl57MIdRCFDg
[not found] ` <1431020158-13789-6-git-send-email-Frank.Li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-05-11 14:34 ` Shawn Guo
2015-05-07 17:35 ` [PATCH V8 6/6] ARM: config: imx_v6_v7_defconfig add imx7d support Frank.Li-KZfg59tc24xl57MIdRCFDg
[not found] ` <1431020158-13789-7-git-send-email-Frank.Li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-05-11 14:35 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431020158-13789-1-git-send-email-Frank.Li@freescale.com \
--to=frank.li-kzfg59tc24xl57midrcfdg@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=lznuaa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).