From: Jaedon Shin <jaedon.shin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>
Cc: Kevin Cernekee <cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Florian Fainelli
<f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Jaedon Shin <jaedon.shin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH 2/2] MIPS: BMIPS: dts: add uart device nodes to bcm7xxx platforms
Date: Fri, 8 May 2015 21:59:18 +0900 [thread overview]
Message-ID: <1431089958-2626-3-git-send-email-jaedon.shin@gmail.com> (raw)
In-Reply-To: <1431089958-2626-1-git-send-email-jaedon.shin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Add two uart device nodes known as the uart1 and uart2 for the bcm7xxx
platforms.
Signed-off-by: Jaedon Shin <jaedon.shin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/mips/boot/dts/brcm/bcm7346.dtsi | 26 ++++++++++++++++++++++++++
arch/mips/boot/dts/brcm/bcm7358.dtsi | 26 ++++++++++++++++++++++++++
arch/mips/boot/dts/brcm/bcm7360.dtsi | 26 ++++++++++++++++++++++++++
arch/mips/boot/dts/brcm/bcm7362.dtsi | 26 ++++++++++++++++++++++++++
arch/mips/boot/dts/brcm/bcm97346dbsmb.dts | 8 ++++++++
arch/mips/boot/dts/brcm/bcm97358svmb.dts | 8 ++++++++
arch/mips/boot/dts/brcm/bcm97360svmb.dts | 8 ++++++++
arch/mips/boot/dts/brcm/bcm97362svmb.dts | 8 ++++++++
8 files changed, 136 insertions(+)
diff --git a/arch/mips/boot/dts/brcm/bcm7346.dtsi b/arch/mips/boot/dts/brcm/bcm7346.dtsi
index 1f30728a3177..d817bb46b934 100644
--- a/arch/mips/boot/dts/brcm/bcm7346.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi
@@ -24,6 +24,8 @@
aliases {
uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
};
cpu_intc: cpu_intc {
@@ -118,6 +120,30 @@
status = "disabled";
};
+ uart1: serial@406940 {
+ compatible = "ns16550a";
+ reg = <0x406940 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <65>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@406980 {
+ compatible = "ns16550a";
+ reg = <0x406980 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <66>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7358.dtsi b/arch/mips/boot/dts/brcm/bcm7358.dtsi
index 2c2aa9368f76..277a90adc1a7 100644
--- a/arch/mips/boot/dts/brcm/bcm7358.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7358.dtsi
@@ -18,6 +18,8 @@
aliases {
uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
};
cpu_intc: cpu_intc {
@@ -112,6 +114,30 @@
status = "disabled";
};
+ uart1: serial@406840 {
+ compatible = "ns16550a";
+ reg = <0x406840 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <62>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@406880 {
+ compatible = "ns16550a";
+ reg = <0x406880 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <63>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7360.dtsi b/arch/mips/boot/dts/brcm/bcm7360.dtsi
index f23b0aed276f..9e1e571ba346 100644
--- a/arch/mips/boot/dts/brcm/bcm7360.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7360.dtsi
@@ -18,6 +18,8 @@
aliases {
uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
};
cpu_intc: cpu_intc {
@@ -112,6 +114,30 @@
status = "disabled";
};
+ uart1: serial@406840 {
+ compatible = "ns16550a";
+ reg = <0x406840 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <62>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@406880 {
+ compatible = "ns16550a";
+ reg = <0x406880 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <63>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7362.dtsi b/arch/mips/boot/dts/brcm/bcm7362.dtsi
index da99db665bbc..6e65db86fc61 100644
--- a/arch/mips/boot/dts/brcm/bcm7362.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7362.dtsi
@@ -24,6 +24,8 @@
aliases {
uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
};
cpu_intc: cpu_intc {
@@ -118,6 +120,30 @@
status = "disabled";
};
+ uart1: serial@406840 {
+ compatible = "ns16550a";
+ reg = <0x406840 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <62>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@406880 {
+ compatible = "ns16550a";
+ reg = <0x406880 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <63>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
index 70f196d89d26..3fe0445b9d37 100644
--- a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
@@ -21,6 +21,14 @@
status = "okay";
};
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
&enet0 {
status = "okay";
};
diff --git a/arch/mips/boot/dts/brcm/bcm97358svmb.dts b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
index d18e6d947739..a8dc01e30313 100644
--- a/arch/mips/boot/dts/brcm/bcm97358svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
@@ -21,6 +21,14 @@
status = "okay";
};
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
&enet0 {
status = "okay";
};
diff --git a/arch/mips/boot/dts/brcm/bcm97360svmb.dts b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
index 4fe515500102..eee8b0e32681 100644
--- a/arch/mips/boot/dts/brcm/bcm97360svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
@@ -21,6 +21,14 @@
status = "okay";
};
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
&enet0 {
status = "okay";
};
diff --git a/arch/mips/boot/dts/brcm/bcm97362svmb.dts b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
index ab8b01fa7dcf..dd408413e922 100644
--- a/arch/mips/boot/dts/brcm/bcm97362svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
@@ -21,6 +21,14 @@
status = "okay";
};
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
&enet0 {
status = "okay";
};
--
2.4.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2015-05-08 12:59 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-08 12:59 [PATCH 0/2] MIPS: BMIPS: dts: update device nodes for bcm7xxx platforms Jaedon Shin
[not found] ` <1431089958-2626-1-git-send-email-jaedon.shin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-05-08 12:59 ` [PATCH 1/2] MIPS: BMIPS: dts: remove unsupported entry for bcm7362 Jaedon Shin
[not found] ` <1431089958-2626-2-git-send-email-jaedon.shin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-05-08 14:40 ` Kevin Cernekee
[not found] ` <CAJiQ=7CQshXhGJ7ftWQSu_UxgKVaRprZPEPXWNP6ci_1bLrJrw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-05-08 15:32 ` Arnd Bergmann
2015-05-08 16:40 ` Kevin Cernekee
[not found] ` <CAJiQ=7Ajkae60eKfzr=mjPDov=bzoq7jBVDdQhGO37G8GGKK3w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-05-08 18:33 ` Arnd Bergmann
2015-05-08 19:53 ` Kevin Cernekee
2015-05-08 15:55 ` Jaedon Shin
2015-05-08 12:59 ` Jaedon Shin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431089958-2626-3-git-send-email-jaedon.shin@gmail.com \
--to=jaedon.shin-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
--cc=ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).