From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Jones Subject: [PATCH 04/13] ARM: STi: STiH416-b2020e: Enable PWM on the B2020 Rev-E Date: Tue, 12 May 2015 13:51:41 +0100 Message-ID: <1431435110-22595-5-git-send-email-lee.jones@linaro.org> References: <1431435110-22595-1-git-send-email-lee.jones@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1431435110-22595-1-git-send-email-lee.jones@linaro.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org, Ajit Pal Singh , Lee Jones , kernel@stlinux.com List-Id: devicetree@vger.kernel.org All the infrastructure is now in place for ST's PWM controller. This patch takes the final step and enables the IP on the 2020 Rev-E development platform. Signed-off-by: Ajit Pal Singh Signed-off-by: Lee Jones --- arch/arm/boot/dts/stih416-b2020e.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/stih416-b2020e.dts b/arch/arm/boot/dts/stih416-b2020e.dts index 961799e..f1ceee1 100644 --- a/arch/arm/boot/dts/stih416-b2020e.dts +++ b/arch/arm/boot/dts/stih416-b2020e.dts @@ -51,5 +51,15 @@ sata0: sata@fe380000{ status = "okay"; }; + + /* SAS PWM Module */ + pwm0: pwm@fed10000 { + status = "okay"; + }; + + /* SBC PWM Module */ + pwm1: pwm@fe510000 { + status = "okay"; + }; }; }; -- 1.9.1